Hondaswap.com | Honda Technical & JDM styling Forums

need2bfaster · 12-03-2007, 05:44 PM

is any one familiar with the f22a6 intake manifold swap on to the f22a1 the problem i am having is my intake is not equpied with the air intake bypass as the f22a6 is i was wandering to do the swap if u will need the wiring harness off of the a6 motor to make the aib to work i know u need the ecu but not sure about the harness

norcalgsr · 12-03-2007, 10:42 PM

All you need to do is find a plug that fits on the IAB solenoid and then run the wires to your ECU. Easiest way would be to find one in a junkyard and cut it off so you don't have to buy the whole harness just to use a couple plugs.

need2bfaster · 12-04-2007, 12:11 AM

ok now i dont know where to plug it into my ecu and im getting so confused my car has 3 plug ins obd1 right ?? its a 90 ex accord but according to this from 90 95 obd0 check it out Honda ECU List

norcalgsr · 12-04-2007, 12:20 AM

Yeah that must be a typo cause it's not correct.. I'm not sure where the pinouts are for the Accord but it shouldn't be hard to find. Just search around for the ECU pinouts from a 1992-1993 Accord EX.

need2bfaster · 12-04-2007, 12:34 AM

i found a thread on cb7tuner it helped alot some guy made a small manual for the intake swap between the 2 engines so .... once i get the ecu and gaskets ill b set hey as for wiring that aib plug into your ecu how do i go about that or just worry about it when i get the ecu

12-03-2007, 05:44 PM	#1
need2bfaster Senior Member Join Date: Nov 2007 Location: pa Posts: 166 iTrader: 0 / 0% Ride: 90 ex accord Rep Power: 0	does any one know is any one familiar with the f22a6 intake manifold swap on to the f22a1 the problem i am having is my intake is not equpied with the air intake bypass as the f22a6 is i was wandering to do the swap if u will need the wiring harness off of the a6 motor to make the aib to work i know u need the ecu but not sure about the harness

12-03-2007, 10:42 PM	#2
norcalgsr Honda Master Technician Join Date: Oct 2007 Location: NorCal Age: 26 Posts: 1,168 iTrader: 0 / 0% Ride: 88 Prelude Si and a CBR 600 Hurricane Rep Power: 19	All you need to do is find a plug that fits on the IAB solenoid and then run the wires to your ECU. Easiest way would be to find one in a junkyard and cut it off so you don't have to buy the whole harness just to use a couple plugs. __________________ Do not PM with tech questions without providing a link to your topic on the forums. This way everyone has access to the information..

12-04-2007, 12:20 AM	#4
norcalgsr Honda Master Technician Join Date: Oct 2007 Location: NorCal Age: 26 Posts: 1,168 iTrader: 0 / 0% Ride: 88 Prelude Si and a CBR 600 Hurricane Rep Power: 19	Yeah that must be a typo cause it's not correct.. I'm not sure where the pinouts are for the Accord but it shouldn't be hard to find. Just search around for the ECU pinouts from a 1992-1993 Accord EX. __________________ Do not PM with tech questions without providing a link to your topic on the forums. This way everyone has access to the information..


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

12-04-2007, 12:11 AM	#3
need2bfaster Senior Member Join Date: Nov 2007 Location: pa Posts: 166 iTrader: 0 / 0% Ride: 90 ex accord Rep Power: 0	ok now i dont know where to plug it into my ecu and im getting so confused my car has 3 plug ins obd1 right ?? its a 90 ex accord but according to this from 90 95 obd0 check it out Honda ECU List

12-04-2007, 12:34 AM	#5
need2bfaster Senior Member Join Date: Nov 2007 Location: pa Posts: 166 iTrader: 0 / 0% Ride: 90 ex accord Rep Power: 0	i found a thread on cb7tuner it helped alot some guy made a small manual for the intake swap between the 2 engines so .... once i get the ecu and gaskets ill b set hey as for wiring that aib plug into your ecu how do i go about that or just worry about it when i get the ecu

Hondaswap.com | Honda Technical & JDM styling Forums

does any one know