Hondaswap.com | Honda Technical & JDM styling Forums

office888 · 06-17-2006, 05:36 PM

Nekkid suspension!!!

Garage, note the B18B1. =D

Garage 2, hah, you can see my $100 wheel/tires set... 15" Konig Zieges, thank you EBAY and local pickup! (Okay, I drove 70 miles for them..In a Daewoo Nubira)

brian11to1 · 06-18-2006, 01:56 AM

are you putting your body kit back on?
why'd you pull the complete suspension off?

office888 · 06-19-2006, 01:11 AM

CRX is receiving ALL NEW SUSPENSION!!! YAY! The only two things that are not getting changed out are the lower control arm, and the sway bar linkage, which i'm going to install Energy Suspension bushings in. Oh yeah, the shocks too. I'll get to those at a later date. I'll cover the install, KYB AGX Shocks w/ Neuspeed Race Coils.

Also, It's getting the Integra Front-Brake swap. And Stainless steel brake lines!

The body kit was never installed, I bought it about two weeks ago from a guy. It had a couple cracks that I fixed by slapping on about 3 layers of fiberglass onto the back, then filling the crack with resin and blending it with glazing putty. It'll be put on shortly.

The CRX is going to get painted black. I'll have new pictures within two weeks.

Thanks for the interest. =D

ripperbone · 06-19-2006, 07:57 AM

you should have more pictures of the whole car. but keep us informed on your progress

office888 · 07-02-2006, 12:43 AM

New pictures!!!

Exterior 1, Rustoleum Flat Black Anti-Rust finish.

Exterior 2, Again with the Rustoleum

Look Ma', no D16A6!

Exterior again

Final part...

Should I weld this? I'm thinking about having a friend with a MIG welder come by and put a weld on it. Look dead center on the little rust spot.

office888 · 07-02-2006, 12:46 AM

I'm a naughty boy...no catalytic converters for me! =P

Okay okay, it came like that in all reality. I'm rockin' the crush bent 2.5" exhaust to an Ractive fart cannon. I'm going to talk to my exhaust guy. I'm going to have him remove the fart cannon, replace the bends with 90 degree mandrel bends (Thank you ebay, $14 per). For muffler instead, this is my setup.

Headers ----- No Cat ---- Magnaflow 14" Muffler/Resonator -- Y-pipe --- Mandrels --- Tips.

Sound good? Hopefully it won't be too loud.

sleeper1.6 · 07-28-2006, 02:31 AM

In Little Rock, AR cops don't care if you don't have cats or not. Smog laws are not enforced! I got a 2 in. custom exhaust to a DC Sports axle back.

Good luck!

brian11to1 · 07-28-2006, 06:45 AM

Its probably not going to sound too good.

06-17-2006, 05:36 PM	#1
office888 Junior Member Join Date: Jun 2006 Posts: 25 iTrader: 0 / 0% Rep Power: 7	1989 CRX Si Project!!! Nekkid suspension!!! Garage, note the B18B1. =D Garage 2, hah, you can see my $100 wheel/tires set... 15" Konig Zieges, thank you EBAY and local pickup! (Okay, I drove 70 miles for them..In a Daewoo Nubira)

06-18-2006, 01:56 AM	#2
brian11to1 Senior Member Join Date: Jan 2003 Posts: 9,000 iTrader: 2 / 100% Rep Power: 111	are you putting your body kit back on? why'd you pull the complete suspension off? __________________ 90 Integra Sedan B20V 225 / 153 I DO NOT answer tech questions via PM. Use the forums!!!

06-19-2006, 07:57 AM	#4
ripperbone angry bear Join Date: Oct 2004 Location: Oklahoma Age: 37 Posts: 2,969 iTrader: 1 / 100% Ride: 02 Acura RSX Rep Power: 44	you should have more pictures of the whole car. but keep us informed on your progress __________________ XBL: ripperbone Vouches / Good buyers or sellers = * pissedoffsol* socolsvtec* lshatchcx18* hybrid89* aafryf* integraracing91* twistedimage* NoJokE* 5speed4life* Estorvito* sheekdude* antonio* VTECPOWER* 98hybrid* traitorzxiong* preludebuddy* wanderinman* TurboMirage* kaoskustoms* B16RacerN2NR* HPHP80620*

07-28-2006, 06:45 AM	#8
brian11to1 Senior Member Join Date: Jan 2003 Posts: 9,000 iTrader: 2 / 100% Rep Power: 111	Its probably not going to sound too good. __________________ 90 Integra Sedan B20V 225 / 153 I DO NOT answer tech questions via PM. Use the forums!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Can I Do With A 1989 Integra?	lohonda	HYBRID -> EG-EK / DC	5	06-20-2006 01:54 PM
PROJECT : Not Our Project	Smonkeyboy	Members' Lounge	21	06-01-2004 05:02 AM
My project	Lion	Engine Building	13	04-12-2004 09:10 AM
Project: White Trash decision needed	BodyDroppedNikes	Members' Lounge	42	01-08-2004 02:47 PM
New Project [under construction]	JDMilan	Members' Lounge	15	07-02-2003 11:33 PM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

06-19-2006, 01:11 AM	#3
office888 Junior Member Join Date: Jun 2006 Posts: 25 iTrader: 0 / 0% Rep Power: 7	CRX is receiving ALL NEW SUSPENSION!!! YAY! The only two things that are not getting changed out are the lower control arm, and the sway bar linkage, which i'm going to install Energy Suspension bushings in. Oh yeah, the shocks too. I'll get to those at a later date. I'll cover the install, KYB AGX Shocks w/ Neuspeed Race Coils. Also, It's getting the Integra Front-Brake swap. And Stainless steel brake lines! The body kit was never installed, I bought it about two weeks ago from a guy. It had a couple cracks that I fixed by slapping on about 3 layers of fiberglass onto the back, then filling the crack with resin and blending it with glazing putty. It'll be put on shortly. The CRX is going to get painted black. I'll have new pictures within two weeks. Thanks for the interest. =D

07-02-2006, 12:43 AM	#5
office888 Junior Member Join Date: Jun 2006 Posts: 25 iTrader: 0 / 0% Rep Power: 7	New pictures!!! Exterior 1, Rustoleum Flat Black Anti-Rust finish. Exterior 2, Again with the Rustoleum Look Ma', no D16A6! Exterior again Final part... Should I weld this? I'm thinking about having a friend with a MIG welder come by and put a weld on it. Look dead center on the little rust spot.

07-02-2006, 12:46 AM	#6
office888 Junior Member Join Date: Jun 2006 Posts: 25 iTrader: 0 / 0% Rep Power: 7	I'm a naughty boy...no catalytic converters for me! =P Okay okay, it came like that in all reality. I'm rockin' the crush bent 2.5" exhaust to an Ractive fart cannon. I'm going to talk to my exhaust guy. I'm going to have him remove the fart cannon, replace the bends with 90 degree mandrel bends (Thank you ebay, $14 per). For muffler instead, this is my setup. Headers ----- No Cat ---- Magnaflow 14" Muffler/Resonator -- Y-pipe --- Mandrels --- Tips. Sound good? Hopefully it won't be too loud.

07-28-2006, 02:31 AM	#7
sleeper1.6 Member Join Date: Jul 2006 Age: 21 Posts: 182 iTrader: 0 / 0% Rep Power: 8	In Little Rock, AR cops don't care if you don't have cats or not. Smog laws are not enforced! I got a 2 in. custom exhaust to a DC Sports axle back. Good luck!

Hondaswap.com | Honda Technical & JDM styling Forums

1989 CRX Si Project!!!