Taco15

Finally got it home and of course i left Andrew's a few hours ago to finalize everything.
I'm happy and excited for the long road ahead.

Thanks alot Andrew and can only hope to be able to make a thread as epic as this.

mac_24_seven

So it's gone. I dunno why I am so attached to that car. <sighs> I guess its time for Andrew to close the thread?

hondarin

ibtl

Taco15

And so it sits in my front yard waiting to ride again......

mac_24_seven

Yeah, IBTL.

Good times in that lil car. Just remember, hit me up whenever you wanna change wheels. I may be able to take em off your hands.

Taco15

If i can find a good deal on some nice colored ones I'll sell them.
the ones Andrew has before looked pretty good to me.

I think they were drag or Gt3's or something. either way i think the repolish makes them much better.

Andrew

Rota Slips

Taco15

not those! the red ones that I also saw on the 4 door DA. I liked those.

Andrew

Oh. Yeah those were Terrance's 16" GT3's.

mac_24_seven

Yeah, I traded them for my bronze Rota C8s. Dude painted them gold :S

Andrew

I couldn't help but notice...

264,987 views! Good grief!

[/end thread forever! lol]

Ethan

i saw you posted and was like. What?!?!?! then i read the post and got sad...

i wanted to see that you got a new honda project

Korax

Same! Also, this thread shouldn't be locked for no reason!

wikedeye

The reason is that Andrew sold the car, and hardly visits hondaswap these days.

TyConway

Wish I saw this earlier,I bought a head package and sent him my b16 head, I emailed for a time to expect my head back, kept saying another week to finish. Asked for a refund will not do b/c he stated he started work on the head. Paypal wont do anything about the situation,( claiming they cant refund money for services) been calling them 3 times a day for a week now for a resolution. Contacted BBB as well, he told them he stopped on the head b/c I opened a claim on him. Either way, he has my $1035 for the work and parts, So finish the head or refund my money. Even told him he could keep my head if he really did start on it. This company SUCKS! Never buy anything from them

eg6sir

that sux man.. just keep on him and you'll get what you want

Andrew

This made me sad... it's very true, though.

I tell you what:

I'm back!!!

I bought a new car a few months ago. I can't decide, but I think I should make a new thread for it... What do you guys think?

Here's the low-down:

1993 Civic LX with (drum-roll please) 363,xxx miles and counting!!!



It's all stock, no mods except I put in a safety-start switch.
I just did the Timing belt/Tensioner/Waterpump/Radiator/Hoses a couple thousand miles ago.

Don't fret, I'll post more pictures when I can take some. I have a laundry list of "To-Do's" for this car, and will start posting it up! it up!


I think I'll make a new thread... What do y'all think? Should I just continue this one?! Let's see how big we can make this thread!!! LOL

I've missed you guys.
Much love, HS!

__________________

My Engine Swap
Write-ups:
HG
FPR
Wheel
Smiley
Cluster.
Adapters.

78civic

What about AWD conversion from a CRV or the like..?
Looks nice and clean.
I missed out on a CLEAN, black 2-door coupe that was abandoned at our employee lot (since 05) with only 65k on it! (just too much red tape to acquire it back then, and then I retired)

I like the small head lights that the early 90's had.

What about fabbing in some bucket seat to the rear? (I wanted to do that with my 90 4dr)
Or even some rotating front buckets for the front like the 'early-mid 70's monte carlo's.

How are the door hinges? Has the driver door limiter pulled from the body?
or is it still operable?

E

__________________
"If you can read, thank a teacher"
"If you can read it in English, thank a VET"

Taco15

crazzzzzy

Welcome back homie.

CRX went to me and literally hours after finishing touches on the car I had an offer I couldn't refuse. car turned out nice and the motor ran ran strong with a tune and rmf header.

now the CRX is strictly an autocross car with a badass single cam.

good luck on your projecto Andrew! funny I got a 94 couple to flip just last week

Andrew

Thanks!
My hinges are hinging in the proper fashion.

The AWD conversion is a fun idea, but the reality is: I'm content with it the way it is. My overall plan for the car is "creature-comforts". Keeping the A/C (I just replaced everything with brand new stuff, so AC is ice cold...), I'd like to find some comfy front seats.. Maybe some clean Tan leather Integra seats or something. Ideas?

Hey buddy!

Glad the car is still around town( I'm assuming anyway)! I hope they didn't chop it up too much for racing... I sure do miss my CRX. If I have the chance, I'd like to buy another one. White, of course.


----------------------

I'm going out of town this weekend, but I have some updates to post soon. I plan to adjust my valves asap, they're making some noise.., as well as do some interior stuff. (Map light, LED's, and other nifty projects.)

Also, what are people doing to 'renew' their motor mounts? I don't want stiff inserts, and IDK much about filling them. Do they make different densities for the Polyurethane? I'd like a slightly tighter than OEM result.

__________________

My Engine Swap
Write-ups:
HG
FPR
Wheel
Smiley
Cluster.
Adapters.

FLounder

For engine mounts that are stiffer than stock, but dont put a ton of vibration on the car, i really like Hardrace engine mounts. The hardrace mounts look and fit like oem, but just have more rubber and its much beefier. Poly inserts are rough, and the full poly mounts are rough. Ive had several different types of mounts before and these hardrace ones are the best. But if you are on a tight budget, then filling your stock mounts will help slightly.

78civic

Get yerself a tube of windshield cauking ($15-18) and a set of used mounts.
Clean ALL gunk off of them, let dry, tape up one side and start caulking the other side getting into all the nooks and cranny's.
I like to use a pop-cicle stick and spread it either even-flat or conical. and let harden for a few days. 4 should be enough. and replace

It will translate some vibration to the cabin, but doesn't bother me that much at all.

And of course, rebuild the shifting linkage bushings. It's probably sloppy after that many miles.
If you can't find the bushings, one can heat the cross shafts to let them melt a little and harden. That can save time till cash comes in.

E

__________________
"If you can read, thank a teacher"
"If you can read it in English, thank a VET"

Andrew

Thanks for the info! I'll check Hardrace out.

Thanks for the caulking info.

Also, I have the ES kit for the linkage. That'll be one of my updates soon.


Can y'all believe it's been 7 years since I started my account and this thread?

wikedeye

Did someones post get deleted? My last post in here does not make sense. I think I was answering someones question, but where is the question?

Glad to see you are still around Andrew. How is married life?

Andrew

It's great, man!!! I'm loving it. It's made me re-prioritize my life, but as Momma Stuart would say: "It's a good thing."

Here's a recent pic of us.... We're alive and well!