Hondaswap.com | Honda Technical & JDM styling Forums

99sidude · 10-09-2007, 12:39 AM

The car will hopefully get dyno tuned in a week or so. I have to make a 3 hour trip in it from Dayton to Akron this wednesday, and I'm kinda nervous. I've driven the car for a half hour at a time no prob, I just don't want to be stuck somewhere.

I don't think I'll make it to the Ft. Wayne area. 2000si, that a long ass drive! I would like to see some pics of your ride though. I used to own one, and every time I see one I get jealous

The only time I can hear the s/c is at high rpm's, and even then its not that loud. People riding say that they can hear it easier. I guess outside of the car, when its coming towards you, the sc whine is very noticable. The exhaust note is different than when it had a close to stock gsr. Its louder, deeper, and has alot more tone to it. I'll get some vids of it making some pulls soon or later.

99sidude · 10-09-2007, 12:48 AM

Quote:

Originally Posted by Calesta

What did your neighbors think?

People kept walking by asking what the fuck I was doing. Some people stoped by to watch. The landlord came by and told me that I can't work on my car on the street anymore. He suggested that I rent one of his garages for 200 a month lol. A cop stopped by too just asking what was going on.

Theres a guy down the street who has a hatch with a b20vtec. The car is the biggest ricer POS i've ever seen. Lambo doors, wing, tails, and alot of rust. He came by a bunch during the swap talking a bunch of shit.He told me that he installed obx stage 4 cams with valvesprings so he "can rev the bitch to 13 grand". He's talking a bunch of shit about how hes going to smoke me. The car is running on a p30 ecu, hasnt been tuned, and has stock internals. I can't wait to see him rev it to 13 grand.

get_nick · 10-09-2007, 08:22 AM

if your neighbor knows what is in it, your car is going to get stolen.

do this
Step 1) GET INSURANCE
step 2) Get an alarm
step 3) install 2, yes 2 kill switches.

trust me, it's worth the time and money invested. keep your car around. and if you don't take my advice, i just might steal it myself.

99sidude · 10-09-2007, 08:43 AM

you are totally right... what scares me is that he talked about how he has 5 or 6 b series motors in a storage unit, and he always has a part if I need it... and I mean anything. Hes prolly running a chop shop or something. When you say get insurance, should I just get full coverage on the car, or do I need to show the company all the reciepts for the car, making my premiums go through the roof?

get_nick · 10-09-2007, 09:07 AM

well, you need full coverage and show receipts. it will make your insurance jump. you just have to weigh the loss. assume that it WILL get stolen.

say insurance goes up to $200/month.
it would cost about $5000 to get your engine setup alone replaced.

you just have to weigh the cost. we have had a million threads on here about people cars getting stolen. Civicious has had his crx stolen twice. that thing was beautiful to.

you can probably get away without having full coverage if you have a good alarm, autoloc on your clutch, 2 kills and disengage the starter or something under the hood every night. obviously you don't have a garage, so thats a problem. you just need to remember that you did your swap in the middle of the fucking street. you should have rented that garage so nobody would know what's in your car. it's a nice car, now try to keep it around.

phyregod · 10-09-2007, 09:33 AM

Yeah, too many people know about it. Insure the hell out of it. Pay the extra few bucks a month. And DO tell the insurance company about the SC, swap, etc.

Flat blacking the exhaust would be cool, but leave the rims alone, they look fine, and have a stock look to them.

95turbteg · 10-09-2007, 03:29 PM

i am thinking about swapping a b16 or a h22 into a 1989 crx si. Not sure how hard it is goign to be. also was thinkin about swapping a h22 into a 94-95 bubble, let me know what you all think. Thanks

Citizen_Insane · 10-09-2007, 05:26 PM

Quote:

Originally Posted by 95turbteg

i am thinking about swapping a b16 or a h22 into a 1989 crx si. Not sure how hard it is goign to be. also was thinkin about swapping a h22 into a 94-95 bubble, let me know what you all think. Thanks

Seeing how all you know how do is jack threads: GTFO

Seany-izzle · 10-09-2007, 10:44 PM

please please please get a cluster with a tach.

Nice natty light box!!

99sidude · 10-09-2007, 11:48 PM

Quote:

Originally Posted by Seany-izzle

please please please get a cluster with a tach.

Nice natty light box!!

We'll see about the cluster... i got a deal on the autometer tach ($30), and it beats having to change out clusters. I guess I don't really mind it.

And what natti light box are you talking about? you must have a really good eye for what's good in life...

Seany-izzle · 10-10-2007, 10:48 PM

We worked into the night...

that one

humblegumbo · 10-11-2007, 01:19 AM

Quote:

Originally Posted by get_nick

if your neighbor knows what is in it, your car is going to get stolen.

do this
Step 1) GET INSURANCE
step 2) Get an alarm
step 3) install 2, yes 2 kill switches.

trust me, it's worth the time and money invested. keep your car around. and if you don't take my advice, i just might steal it myself.

Step 4) Eliminate ricer POS from gene pool.

Z6CRX · 10-11-2007, 01:24 AM

Quote:

Originally Posted by humblegumbo

Step 4) Eliminate ricer POS from gene pool.

MC Hammer FTW again!

sorry can't help it if its fun to swing at your problems.

99sidude · 10-11-2007, 12:10 PM

funny stuff guys... I really like that idea

yesterday i drive the car 200 miles from dayton to akron. I'm not even at a half tank yet, and i went over 200 miles. Bad news tho, I heard a little pinging when I was in 5th gear, around 3-4k rm's, at full throttle. The wideband is telling me that im running a 10.5:1 a/f here, so either the gauge is wrong, or I need to back off timing.

99sidude · 10-11-2007, 12:21 PM

I decied to go this route to protect my car against thieves:

Z6CRX · 10-11-2007, 03:18 PM

That one is great.
This one may be a bit more effective though.

E_SolSi · 10-11-2007, 04:20 PM

i use the old tried and true method
Big Black Ben

humblegumbo · 10-11-2007, 04:21 PM

^^^fukkenbadass! Where can I get one of those?

I love the "uhhh" when she's armed....!

::edit::

can't go wrong w/ big-boned african-american gentleman either.........

HatchSpeeD · 10-11-2007, 09:20 PM

Holy hell, is it me or does that flywheel need to be resurfaced?! Street swapping, awesome.

99sidude · 10-11-2007, 09:26 PM

the flywheel and the clutch have about 10k miles on them. What you see is some of the clutch material stuck to the flywheel because it sat for a few months. It cleaned up no problem, and has been giving me no issues. Once cleaned up, the flywheel still had the stock machined finish appearance.

99sidude · 10-14-2007, 10:56 PM

Here's a shitty 0-100 vid my friend made over the weekend. The first run was decent but the jackass cut off before I passes. The second try I had way too much wheel spin, shifted to 3rd way too soon, and passed the camera about 10 mph slower.

humblegumbo · 10-15-2007, 02:10 AM

Damn, them some PISSED OFF bees, man!

Cool, though. Thanks for the vid. She sounds sweet, what're the chances of seeing a daytime run?

reikoshea · 10-15-2007, 02:15 AM

not bad man....sounds like you still have some idle and low load tuning left to do though.

99sidude · 10-15-2007, 11:53 AM

I'll get some daytime runs as soon as I can find the time and a camera

I just wanted to hear what the car sounds like from the outside with that video

humblegumbo · 10-15-2007, 03:33 PM

Cool. Looking fwd to it as usual.

$29.95 one-time-use video cameras ready
By Jefferson Graham, USA TODAY
The first one-time-use video camera goes on sale this week at CVS drugstores in the Northeast.

Just trying to help....

10-09-2007, 08:22 AM	#28
get_nick The G37.... Join Date: Apr 2003 Location: Washington State Age: 29 Posts: 9,992 iTrader: 0 / 0% Ride: Black G37, '07 R6 Rep Power: 266	if your neighbor knows what is in it, your car is going to get stolen. do this Step 1) GET INSURANCE step 2) Get an alarm step 3) install 2, yes 2 kill switches. trust me, it's worth the time and money invested. keep your car around. and if you don't take my advice, i just might steal it myself. __________________ I changed the page layout. let me know what you think. I need feedback. www.obamacies.com

10-09-2007, 09:07 AM	#30
get_nick The G37.... Join Date: Apr 2003 Location: Washington State Age: 29 Posts: 9,992 iTrader: 0 / 0% Ride: Black G37, '07 R6 Rep Power: 266	well, you need full coverage and show receipts. it will make your insurance jump. you just have to weigh the loss. assume that it WILL get stolen. say insurance goes up to $200/month. it would cost about $5000 to get your engine setup alone replaced. you just have to weigh the cost. we have had a million threads on here about people cars getting stolen. Civicious has had his crx stolen twice. that thing was beautiful to. you can probably get away without having full coverage if you have a good alarm, autoloc on your clutch, 2 kills and disengage the starter or something under the hood every night. obviously you don't have a garage, so thats a problem. you just need to remember that you did your swap in the middle of the fucking street. you should have rented that garage so nobody would know what's in your car. it's a nice car, now try to keep it around. __________________ I changed the page layout. let me know what you think. I need feedback. www.obamacies.com

10-09-2007, 10:44 PM	#34
Seany-izzle Senior Member Join Date: Aug 2003 Location: In a fucking house. Age: 25 Posts: 7,751 iTrader: 0 / 0% Rep Power: 96	please please please get a cluster with a tach. Nice natty light box!! __________________ My name is Sean.

10-10-2007, 10:48 PM	#36
Seany-izzle Senior Member Join Date: Aug 2003 Location: In a fucking house. Age: 25 Posts: 7,751 iTrader: 0 / 0% Rep Power: 96	We worked into the night... that one __________________ My name is Sean.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
B18C type R or K20A for 92-95 HATCH	bistec	HYBRID -> EG-EK / DC	45	10-21-2008 12:46 AM
FS: B18c swap LSD, JRSC, more	toyz51	Parts: For Sale/Trade/Wanted	4	02-21-2008 11:27 AM
JDM obd1 B18C into 2000 Hatch	christ.deyoung	HYBRID -> EG-EK / DC	0	08-12-2007 11:27 PM
JRSC B18C	EH3B18C	Forced Induction	7	03-09-2004 12:16 AM
B18C or H22A into a 96' Hatch	AstroRide	HYBRID -> EG-EK / DC	6	01-25-2004 02:05 PM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

10-09-2007, 03:29 PM	#32
95turbteg Junior Member Join Date: Oct 2007 Location: Long Island, New York Posts: 8 iTrader: 0 / 0% Ride: h22 rex soon. Rep Power: 0	i am thinking about swapping a b16 or a h22 into a 1989 crx si. Not sure how hard it is goign to be. also was thinkin about swapping a h22 into a 94-95 bubble, let me know what you all think. Thanks

10-11-2007, 09:20 PM	#44
HatchSpeeD ...Hi... Join Date: Apr 2003 Location: Beantown Posts: 1,237 iTrader: 0 / 0% Rep Power: 26	Holy hell, is it me or does that flywheel need to be resurfaced?! Street swapping, awesome.

Hondaswap.com | Honda Technical & JDM styling Forums

Hatch + b18c + jrsc buld