Hondaswap.com | Honda Technical & JDM styling Forums

BrutalB83 · 07-08-2007, 01:06 AM

Has anybody ever installed a Mugen-style lip on a 94-97 Integra?

It's an ABS plastic lip from jdmshit.com, and it seems like it's a bit too short; the ends of it won't wrap around the ends of the bumper like they should. I did do some research and it seems like this is a fairly common issue. I've read stuff about how people have stretched them out and what-not, but no really specific instructions or pictures. I was hoping maybe somebody on here had done one before and could let me know if there's some kind of trick to it.

Any advice or suggestions?

BrutalB83 · 07-10-2007, 02:35 AM

Bumpity Bump!

ALEXBECK23 · 07-10-2007, 12:19 PM

Quote:

Originally Posted by BrutalB83

Has anybody ever installed a Mugen-style lip on a 94-97 Integra?

It's an ABS plastic lip from jdmshit.com, and it seems like it's a bit too short; the ends of it won't wrap around the ends of the bumper like they should. I did do some research and it seems like this is a fairly common issue. I've read stuff about how people have stretched them out and what-not, but no really specific instructions or pictures. I was hoping maybe somebody on here had done one before and could let me know if there's some kind of trick to it.

Any advice or suggestions?

get some screws and some double side tape!!!!!! thats it!!!

post some pics when you done!

Turbo&Auto · 07-10-2007, 12:21 PM

Does it wrap around the OEM bumper or just bolt on underneath it?

If it wraps around the bumper, make sure the inside edges of the lip are not bumpy or have big plastic chunks.

ALEXBECK23 · 07-10-2007, 12:26 PM

Quote:

Originally Posted by Turbo&Auto

Does it wrap around the OEM bumper or just bolt on underneath it?

If it wraps around the bumper, make sure the inside edges of the lip are not bumpy or have big plastic chunks.

he must have to cut those edges in order to keep everything on level!

BrutalB83 · 07-13-2007, 03:21 PM

Quote:

Originally Posted by Turbo&Auto

Does it wrap around the OEM bumper or just bolt on underneath it?

If it wraps around the bumper, make sure the inside edges of the lip are not bumpy or have big plastic chunks.

Yeah, it wraps around the edges of the bumper and then you screw it inside the wheel well. Thanks for the tip. I'll take it off this weekend and see if there's anything that I can shave off. Also, I called jdmshit and they said to lay it out in the sun for a few hours and hopefully that will make the plastic a little more malleable, so I guess I'll try that as well.

Thanks for the help dude.

07-08-2007, 01:06 AM	#1
BrutalB83 Crusher of Noob Ambitions Join Date: Jun 2006 Location: Oxford, MI Age: 25 Posts: 6,665 iTrader: 0 / 0% Ride: 97 Integra LS Coupe Rep Power: 160	Help! Mugen Lip Install Problems... Has anybody ever installed a Mugen-style lip on a 94-97 Integra? It's an ABS plastic lip from jdmshit.com, and it seems like it's a bit too short; the ends of it won't wrap around the ends of the bumper like they should. I did do some research and it seems like this is a fairly common issue. I've read stuff about how people have stretched them out and what-not, but no really specific instructions or pictures. I was hoping maybe somebody on here had done one before and could let me know if there's some kind of trick to it. Any advice or suggestions? __________________ If you find something I say helpful, please rep it up! Also, DO NOT PM me with tech questions! Use the forums so we can all benefit from the answers. I will NOT respond to tech-related PMs... 97 Integra LS Coupe: AEM Intake/Megan Header/Magnaflow Exhaust Tokico Shocks & Springs Megan Strut Braces & H-Brace 98-01 Conversion (Front/Rear Bumpers & "Mesh" Alloys)

07-10-2007, 02:35 AM	#2
BrutalB83 Crusher of Noob Ambitions Join Date: Jun 2006 Location: Oxford, MI Age: 25 Posts: 6,665 iTrader: 0 / 0% Ride: 97 Integra LS Coupe Rep Power: 160	Bumpity Bump! __________________ If you find something I say helpful, please rep it up! Also, DO NOT PM me with tech questions! Use the forums so we can all benefit from the answers. I will NOT respond to tech-related PMs... 97 Integra LS Coupe: AEM Intake/Megan Header/Magnaflow Exhaust Tokico Shocks & Springs Megan Strut Braces & H-Brace 98-01 Conversion (Front/Rear Bumpers & "Mesh" Alloys)

07-10-2007, 12:21 PM	#4
Turbo&Auto Nick Go FAST!! Join Date: Jan 2006 Location: East Burg, PA! Age: 27 Posts: 3,218 iTrader: 3 / 100% Ride: Hunks of shit Rep Power: 75	Does it wrap around the OEM bumper or just bolt on underneath it? If it wraps around the bumper, make sure the inside edges of the lip are not bumpy or have big plastic chunks. __________________ www.BackyardTurbo.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 16" Mugen MF-8's Powdercoated Black w/tires.	Toxis	Parts: For Sale/Trade/Wanted	19	04-27-2007 04:46 AM
Wtb Vtec Head	ls ef	Parts: For Sale/Trade/Wanted	6	11-09-2006 04:21 PM
Build a Reliable LS/VTEC	hondacrxb16vtec	General Tech Articles	0	10-06-2006 08:54 PM
tranny install problems on GSR motor	fierceEG6	HYBRID -> EG-EK / DC	4	08-13-2006 10:11 AM
How to build a "reliable" lsvtec/b20vtec	bambam	General Tech Articles	2	07-02-2006 05:48 AM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

Hondaswap.com | Honda Technical & JDM styling Forums

Help! Mugen Lip Install Problems...