Hondaswap.com | Honda Technical & JDM styling Forums

crxhfz6 · 10-24-2009, 10:37 AM

im in the process of switching transmissions in my 89 crx. I have an hf trans that is going in and we noticed that the input shaft had a little wiggle to it that we thought we would need to fix. i went ahead and took out the one in the car in it had the same deal. so is this actually normal or do both have the same problem?

D16SiHatch · 10-24-2009, 08:47 PM

no it's not normal. the input shaft bearings are most likely fubared.

the broken one in this picture

pulled from this site

http://www.performanceforum.com/wesv...ans/trans.html

which you may end up needing it turns out lol

mikey bottles · 10-24-2009, 08:54 PM

not trying to thread jack, but do you know where you can buy just the input shaft bearing instead of in a whole kit? ive looked everywhere but cant find just the bearing, im sure crxhf would appreciate the info as well!

jlicrx · 10-27-2009, 10:40 AM

Quote:

Originally Posted by mikey bottles

not trying to thread jack, but do you know where you can buy just the input shaft bearing instead of in a whole kit? ive looked everywhere but cant find just the bearing, im sure crxhf would appreciate the info as well!

we buy them from the local Honda dealer - there are 2 different bearings available, one for the small bearing case (DX/HF/etc.) and one for the large bearing case (Si/EX/ZC)

small bearing Part No. 91002-PHR-003 - 26mm i.d. x 52mm o.d. x 15mm thk.
large bearing Part No. 91002-PS0-003 - 26mm i.d. x 58mm o.d. x 15mm thk.

you will want to also replace the seal:

Part No. 91216-PL3-005

crxhfz6 · 10-27-2009, 11:23 AM

thanks. i just used one off of a disassembled hf i had lying around because it looked brand new. i got all of the seals in and it almost ready to be put back together

10-24-2009, 10:37 AM	#1
crxhfz6 Junior Member Join Date: Oct 2009 Location: Kansas Age: 19 Posts: 23 iTrader: 0 / 0% Ride: 89 crx hf && 2-85 crx dx Rep Power: 1	trans question im in the process of switching transmissions in my 89 crx. I have an hf trans that is going in and we noticed that the input shaft had a little wiggle to it that we thought we would need to fix. i went ahead and took out the one in the car in it had the same deal. so is this actually normal or do both have the same problem?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One more trans question	92sihatch	Civic and del Sol - EG and EK	16	04-11-2008 04:42 PM
Trans question	CrixSi91	HYBRID -> ED-EF / DA	4	06-30-2007 12:31 PM
Question>> About L3 Trans	ceehris	Civic and CRX - EF	5	11-29-2006 07:57 PM
trans question	Ignorant import guy	HYBRID -> EG-EK / DC	1	05-28-2006 01:06 AM
90 Crx Trans Question	nickcwell	HYBRID -> ED-EF / DA	2	05-31-2003 10:13 AM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

10-24-2009, 08:47 PM	#2
D16SiHatch Senior Member Join Date: Sep 2007 Posts: 880 iTrader: 0 / 0% Rep Power: 35	no it's not normal. the input shaft bearings are most likely fubared. the broken one in this picture pulled from this site http://www.performanceforum.com/wesv...ans/trans.html which you may end up needing it turns out lol

10-24-2009, 08:54 PM	#3
mikey bottles Prof. Bottles Join Date: Nov 2006 Location: Dirty Jer-Z Age: 24 Posts: 322 iTrader: 1 / 100% Ride: Swapped 88' Rex Rep Power: 15	not trying to thread jack, but do you know where you can buy just the input shaft bearing instead of in a whole kit? ive looked everywhere but cant find just the bearing, im sure crxhf would appreciate the info as well!

10-27-2009, 11:23 AM	#5
crxhfz6 Junior Member Join Date: Oct 2009 Location: Kansas Age: 19 Posts: 23 iTrader: 0 / 0% Ride: 89 crx hf && 2-85 crx dx Rep Power: 1	thanks. i just used one off of a disassembled hf i had lying around because it looked brand new. i got all of the seals in and it almost ready to be put back together

Hondaswap.com | Honda Technical & JDM styling Forums

trans question