Hondaswap.com

Parrish36 · 05-11-2008, 08:00 PM

so i have a 1987 crx that is set up for a 3/8's oval race track and i have a B20A5 just sittin here and i wanted to know if this could possibley be done or has someone else done this before???

ulyjdm · 05-11-2008, 10:50 PM

waz up man i read ur message and to b honest with u it"s posible cause B16 fits so theres not a problem at all ur gonna have to change hub or spindle but it's really easy latez

AHHVTEC · 05-11-2008, 10:55 PM

yes but it will be 100% custom everything,and the b29a5 is way different from all the other b series motors

Celerity · 05-12-2008, 07:08 PM

This swap is going to SUCK. especially in a cornering situation. At speed the extra weight will jump in and rock the front end out.

You'll do a tire change every 5 laps. Maybe if you did mile oval, and avoided most of the circle tracks out there... got something with a high bank.

I wouldn't do it.

Parrish36 · 07-25-2008, 12:21 AM

well i just started the swap 2 days ago im just sorting through all of the wiring i dont need and cutting it out. i was thinking about just switching the CV joints on the trans side and leaving the hubs and spindals and that side of the axle for the 1.5 would it work or just bust the axles right off???

05-11-2008, 08:00 PM	#1
Parrish36 Junior Member Join Date: Feb 2008 Posts: 9 iTrader: 0 / 0% Rep Power: 0	is it possible to swap a B20A5 into a 1987 crx?? so i have a 1987 crx that is set up for a 3/8's oval race track and i have a B20A5 just sittin here and i wanted to know if this could possibley be done or has someone else done this before???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1987 CRX ZC 1st gen swap...	Ozziecrx	HYBRID -> EG-EK / DC	5	04-24-2008 07:25 PM
1987 CRX ZC 1st gen swap...	Ozziecrx	HYBRID -> EG-EK / DC	0	04-22-2008 10:15 PM
Engine Swap from B21A1 to B20A5 Question	tprelude	Prelude	1	09-26-2007 02:15 PM
Swap B20A5 for B20B	Senate9690	HYBRID -> BA-BB /CA-CD	10	07-19-2007 09:56 PM
B20A5 Swap in a 1987 Lude Si???	LudeSi420	HYBRID -> BA-BB /CA-CD	1	02-18-2004 10:04 PM

05-11-2008, 10:50 PM	#2
ulyjdm ulysses Join Date: May 2008 Location: azusa Posts: 2 iTrader: 0 / 0% Ride: S2000/AcuraGSR Rep Power: 0	waz up man i read ur message and to b honest with u it"s posible cause B16 fits so theres not a problem at all ur gonna have to change hub or spindle but it's really easy latez

05-11-2008, 10:55 PM	#3
AHHVTEC HS TECH Join Date: Oct 2006 Location: Alabama Age: 28 Posts: 7,864 iTrader: 1 / 100% Ride: dc5,cr-x,mk4 gti,2nd gen civic, Rep Power: 126	yes but it will be 100% custom everything,and the b29a5 is way different from all the other b series motors

07-25-2008, 12:21 AM	#5
Parrish36 Junior Member Join Date: Feb 2008 Posts: 9 iTrader: 0 / 0% Rep Power: 0	well i just started the swap 2 days ago im just sorting through all of the wiring i dont need and cutting it out. i was thinking about just switching the CV joints on the trans side and leaving the hubs and spindals and that side of the axle for the 1.5 would it work or just bust the axles right off???

Hondaswap.com

is it possible to swap a B20A5 into a 1987 crx??