coleon

Well I have a new project, 90 dx accord, and I put a 94 Jdm H22a in it, and I know everone say's to strap the accord harness on and wire the few vtec and pressure sensor wires, But I have no accord harness to strap on, I have labeled the p13 h22 harness ( 5 plugs ) and have the 3 engine bay plugsin the accord left to do, most of them tone out and can be referenced on the ecu pinout, but some cant, mainly because perhaps they run to the dash, But I was hoping someone would have the helms 90 accord and could tell me what number plug they are and what they are according to color, and yes the car is obd1 and is simple, but 2650 in a motor I would like to identify all wires and just connect the 5 plugs on h22 to the 3 on 90 accord, and run a could extra, If any one can help me, or atleast point me in the right direction, I would be greatly apprechieted, Thanks Cole
coleon@mindspring.com

radnulb

save yourself the pain and suffering. Accord harnesses are a dime a dozen in the yards around here... You really need one to do the swap easily due to thee connectors at the shock tower being pretty different.

__________________
PGMFI.org founder and DIY ECU tuning advocate
Just say no to rice...

dohcvtec_accord

Please refer to our FAQ. There is no need to post your topic more than once.

This topic has been closed by a moderator. Please continue your question in the other thread that you started.

Thanks, Moderating Team

__________________
This space left intentionally blank.