Hondaswap.com | Honda Technical & JDM styling Forums

madteggy · 10-10-2009, 10:12 PM

yo can ne one help i have an ls v on obd2 integra i am runing a obd2 gsr ecu and my v tech is not engaging i wired all wires correct i dont get any check engine codes wired my knock to a ground my vtech works when i connect it straight with a switch ne one

dzminiz · 10-11-2009, 01:03 AM

First off... It's VTEC, not a vtech phone.

Does the CEL light work?
Was the car warmed up?
In gear and in motion, not just sitting in neutral reving up

phyregod · 10-11-2009, 01:25 AM

Here is a nice troubleshooting chart, should get you taken care of.

VTech Product Support

reikoshea · 10-11-2009, 03:13 AM

two people beat me to the joke, but i'll try to be helpful.

check your oil levels and oil pan for dents. if there is not enough oil pressure vtec wont engage.

madteggy · 10-11-2009, 05:33 AM

c'mon dude the car was warm and i was driving for a while my cell light is working n my vtec engages with a switch to the power but not with the ecu

My oil s in good condition n my oil pan has no dents

double0Si · 10-11-2009, 08:57 AM

isntitannoyingwhensomeonecantseemto usepropergrammarpunctuationorspelli ngibetyourprettypissedoffatmerightn owbuticanassureyouthefeelingismutua lgiveVtechacallandseewhattheyhaveto sayaboutyour"cell"lightimsurethelin kPhyregodgaveyoucouldproveveryusefu lokimstartingtoannoymyselfsoillfini shwiththisyou=asshat

TurboRex90 · 10-11-2009, 11:12 AM

yeah only reason i even glimpsed at this thread.. Was to flame your misspelling of Vtec.

RoughKnight · 10-11-2009, 11:32 AM

^ Ditto

dzminiz · 10-11-2009, 12:00 PM

Ya sure its a p72? did you check the board and not just the case?

madteggy · 10-13-2009, 02:50 AM

Quote:

Originally Posted by RoughKnight

^ Ditto

yep tried it all

madteggy · 10-13-2009, 02:53 AM

I havent checked the board but if my knock sensor is not grounded it red lines at 5500
also if my vtec silly isnt connected i get a cell code for vtec

B18Ctec · 10-13-2009, 05:45 AM

hey I would say check ur Vtec solenoid coz some times they start to play games

madteggy · 10-13-2009, 07:00 PM

what should i do to the solenoid

D15Beater · 10-14-2009, 12:33 AM

Quote:

Originally Posted by madteggy

what should i do to the solenoid

Run 12v's to it and see if its working.

madteggy · 10-15-2009, 05:32 AM

like i said in my post my vtec kicks in when its wired with a switch to the batt but not when its connected to the ecu (P72)

dtob · 10-15-2009, 09:04 AM

You sound like a douchebag and I hope no one helps you out.

VTEC!!! AND CEL NOT CELL!!!!

madteggy · 10-15-2009, 03:40 PM

get the f*** outa here dude these posts r for people to nget help not for people to talk shit
just need this shit fixed

dtob · 10-16-2009, 08:12 AM

I you want someone to help you, don't act like a dick and they might want to. I'm not calling you a dick just saying that you're acting like one.

This site is for people who need help and know how to ask for it the right way to get help, not for people who need help, don't search for their answer and then when people put up a possible fix just shoot them down rudely.

I think you'll have to start searching for your answer now, if you didn't notice no one is trying to help you out. Sorry for your luck.

RoughKnight · 10-16-2009, 01:12 PM

Read my sig!
+rep if it helps!

double0Si · 10-17-2009, 12:11 AM

Do we win a prize when we get to a certain rep level or something? Seems like everyone is crying for it these days.

RoughKnight · 10-17-2009, 09:19 AM

^ I was wondering when u'd troll my posts...only a matter of time

double0Si · 10-17-2009, 03:02 PM

And I was wondering when you'd rep whore yourself out. Guess were just set in our ways...

RoughKnight · 10-17-2009, 06:06 PM

Still haven't gotten the sarcasm of the first post...another thread you've tainted doomed to fail...

double0Si · 10-17-2009, 06:31 PM

You don't get a lack of proper grammar or punctuation? Must be a Canadian thing too eh'? This thread was tainted long before I got here.

madteggy · 10-17-2009, 06:39 PM

thanx for the help ne ways

10-10-2009, 10:12 PM	#1
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	vtec problems yo can ne one help i have an ls v on obd2 integra i am runing a obd2 gsr ecu and my v tech is not engaging i wired all wires correct i dont get any check engine codes wired my knock to a ground my vtech works when i connect it straight with a switch ne one

10-11-2009, 11:32 AM	#8
RoughKnight Christmas Car Join Date: Aug 2009 Location: Ottawa, Ont Age: 21 Posts: 350 iTrader: 0 / 0% Ride: 93 4dr D15B, Greddy Short Ram, 4-2-1 Header, 2.5" Exhaust. Rep Power: 8	^ Ditto __________________ Please direct your questions in the following format. 1) Did I search it on Google? 2) Did I use the search function in the TOP RIGHT AREA of this page? 3) Refer to Step 1 and 2. If that doesn't work, then feel free to post.

10-16-2009, 01:12 PM	#19
RoughKnight Christmas Car Join Date: Aug 2009 Location: Ottawa, Ont Age: 21 Posts: 350 iTrader: 0 / 0% Ride: 93 4dr D15B, Greddy Short Ram, 4-2-1 Header, 2.5" Exhaust. Rep Power: 8	Read my sig! +rep if it helps! __________________ Please direct your questions in the following format. 1) Did I search it on Google? 2) Did I use the search function in the TOP RIGHT AREA of this page? 3) Refer to Step 1 and 2. If that doesn't work, then feel free to post.

10-17-2009, 09:19 AM	#21
RoughKnight Christmas Car Join Date: Aug 2009 Location: Ottawa, Ont Age: 21 Posts: 350 iTrader: 0 / 0% Ride: 93 4dr D15B, Greddy Short Ram, 4-2-1 Header, 2.5" Exhaust. Rep Power: 8	^ I was wondering when u'd troll my posts...only a matter of time __________________ Please direct your questions in the following format. 1) Did I search it on Google? 2) Did I use the search function in the TOP RIGHT AREA of this page? 3) Refer to Step 1 and 2. If that doesn't work, then feel free to post.

10-17-2009, 06:06 PM	#23
RoughKnight Christmas Car Join Date: Aug 2009 Location: Ottawa, Ont Age: 21 Posts: 350 iTrader: 0 / 0% Ride: 93 4dr D15B, Greddy Short Ram, 4-2-1 Header, 2.5" Exhaust. Rep Power: 8	Still haven't gotten the sarcasm of the first post...another thread you've tainted doomed to fail... __________________ Please direct your questions in the following format. 1) Did I search it on Google? 2) Did I use the search function in the TOP RIGHT AREA of this page? 3) Refer to Step 1 and 2. If that doesn't work, then feel free to post.


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

10-11-2009, 01:03 AM	#2
dzminiz Junior Member Join Date: Apr 2004 Location: Martinsburg, wv Posts: 99 iTrader: 0 / 0% Rep Power: 12	First off... It's VTEC, not a vtech phone. Does the CEL light work? Was the car warmed up? In gear and in motion, not just sitting in neutral reving up

10-11-2009, 05:33 AM	#5
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	c'mon dude the car was warm and i was driving for a while my cell light is working n my vtec engages with a switch to the power but not with the ecu My oil s in good condition n my oil pan has no dents

10-11-2009, 12:00 PM	#9
dzminiz Junior Member Join Date: Apr 2004 Location: Martinsburg, wv Posts: 99 iTrader: 0 / 0% Rep Power: 12	Ya sure its a p72? did you check the board and not just the case?

10-13-2009, 02:53 AM	#11
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	I havent checked the board but if my knock sensor is not grounded it red lines at 5500 also if my vtec silly isnt connected i get a cell code for vtec

10-13-2009, 05:45 AM	#12
B18Ctec Greenhorn Join Date: Oct 2009 Location: Newzealand Posts: 2 iTrader: 0 / 0% Ride: 97 integra B18C Rep Power: 0	hey I would say check ur Vtec solenoid coz some times they start to play games

10-13-2009, 07:00 PM	#13
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	what should i do to the solenoid

10-15-2009, 05:32 AM	#15
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	like i said in my post my vtec kicks in when its wired with a switch to the batt but not when its connected to the ecu (P72)

10-15-2009, 09:04 AM	#16
dtob Senior Member Join Date: Mar 2007 Posts: 578 iTrader: 0 / 0% Rep Power: 11	You sound like a douchebag and I hope no one helps you out. VTEC!!! AND CEL NOT CELL!!!!

10-15-2009, 03:40 PM	#17
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	get the f*** outa here dude these posts r for people to nget help not for people to talk shit just need this shit fixed

10-16-2009, 08:12 AM	#18
dtob Senior Member Join Date: Mar 2007 Posts: 578 iTrader: 0 / 0% Rep Power: 11	I you want someone to help you, don't act like a dick and they might want to. I'm not calling you a dick just saying that you're acting like one. This site is for people who need help and know how to ask for it the right way to get help, not for people who need help, don't search for their answer and then when people put up a possible fix just shoot them down rudely. I think you'll have to start searching for your answer now, if you didn't notice no one is trying to help you out. Sorry for your luck.

10-17-2009, 06:39 PM	#25
madteggy Member Join Date: Jul 2009 Age: 21 Posts: 30 iTrader: 0 / 0% Rep Power: 1	thanx for the help ne ways

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help vtec problems	slammedaccord329	Accord	0	01-03-2008 10:52 PM
Vtec Problems	Pishpeng	HYBRID -> EG-EK / DC	1	08-05-2007 08:54 PM
Vtec problems	BoogieDown	ECU's, Electronics, and Tuning	4	09-04-2005 02:23 PM
Vtec Problems	synergy2636	General Tech and Maintenance	1	02-27-2003 12:39 AM
Problems With Vtec	B18CJUNKIE	HYBRID -> EG-EK / DC	3	01-07-2003 11:54 PM

Hondaswap.com | Honda Technical & JDM styling Forums

vtec problems