Hondaswap.com | Honda Technical & JDM styling Forums

monty92 · 04-24-2009, 02:29 PM

buildin an ls vtec what horse power numbers can i expect?
92 integra b18

newb · 04-24-2009, 02:36 PM

12 kajillion horse.

CAFROG · 04-24-2009, 02:38 PM

Stock bottom end and stock VTEC top end (around 185-190hp to the CRANK not wheels)

Matts96HB · 04-24-2009, 02:39 PM

My god. You really expect us to be able to predict that without any specifics at all?

CARFROG, you can't even be assured of that. What about the tune? GSR to B16 to ITR or CTR is going to vary quite a bit too.

Good god. Fail.

CAFROG · 04-24-2009, 04:26 PM

Thats based on stock head and bottom end with the nastural compression change when applying a VTEC head to a non-VTEC bottom end (yes ITR or CTR will vary slightly. I sad stock....not tuned or chipped or ported or poor man type r. I said STOCK

And the varences if all applications were STOCK...NO NO NO they WILL NOT VARY that much.

Obviously the original poster is like MANY post that are terribly Vague and leave mounds of information unsaid. I gave him a ballpark figure that is VERY REALISTIC and gives him vague info based on the vague question.

Thanks for filling me in on all the different heads...although I was already aware

newb · 04-24-2009, 04:57 PM

monty92 · 04-24-2009, 07:13 PM

sorry a stock bottom end with the head off a 95 gsr

BLOWN-EK · 04-24-2009, 08:28 PM

you should make around 165 whp

disableddan · 04-25-2009, 12:45 AM

You'll blow the welds on the intake making that kind of power.

D15Beater · 04-25-2009, 01:08 AM

New issue of Project Car, 92 EG with a GSR LS/vtec. Obx cams, retainers, springs and aftermarket intake manifold. Dynoed 178hp to the wheels, ran a 9.7 in the 1/8mile.

My old 91 Civic 4-door. B18a1 LS, 2000 LS B18b cams stock valvetrain, Obd2 B18b intake manifold and 4.44 cable transmission on street tires. never dynoed but ate Gsr swaps and ran a 9.5 in the 1/8 mile.

newb · 04-25-2009, 03:08 PM

What?

Matts96HB · 04-25-2009, 09:48 PM

Quote:

Originally Posted by CAFROG

Thats based on stock head and bottom end with the nastural compression change when applying a VTEC head to a non-VTEC bottom end (yes ITR or CTR will vary slightly. I sad stock....not tuned or chipped or ported or poor man type r. I said STOCK

And the varences if all applications were STOCK...NO NO NO they WILL NOT VARY that much.

Obviously the original poster is like MANY post that are terribly Vague and leave mounds of information unsaid. I gave him a ballpark figure that is VERY REALISTIC and gives him vague info based on the vague question.

Thanks for filling me in on all the different heads...although I was already aware

You obviously don't understand what I'm trying to say here.

You can have two identical LS-VTEC engines and they are not going to run the same, nor put out the same amount of power. There are too many variables even in tiny details of the engine.

So no, your guess was not very realistic.

monty92 · 05-02-2009, 12:20 PM

would getting an after market computer like hondata be the best way to get more power? quick

monty92 · 07-14-2009, 07:33 PM

sorry i got more specs b18a block with a b18c1 head and p28 ecu, short ram intake and 2.5 inch exhaust? what numbers am i looking for an estimation horsepower torque? thanks

04-24-2009, 02:29 PM	#1
monty92 Member Join Date: Jan 2009 Location: regina, sask Age: 19 Posts: 59 iTrader: 0 / 0% Ride: 92 integra gs, 03 sonoma zr2 Rep Power: 2	ls vtec buildin an ls vtec what horse power numbers can i expect? 92 integra b18

04-24-2009, 02:39 PM	#4
Matts96HB F.I. Junkie Join Date: Apr 2006 Location: Spokane, WA Age: 19 Posts: 2,658 iTrader: 1 / 100% Ride: 1996 Civic, 1992 Accord Rep Power: 101	My god. You really expect us to be able to predict that without any specifics at all? CARFROG, you can't even be assured of that. What about the tune? GSR to B16 to ITR or CTR is going to vary quite a bit too. Good god. Fail. __________________ XBOX LIVE GT: teb00stcat (00's are zeroes) -320 WHP EJ6-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Honda vtec p28 p30 p72 tuned ecu ls/vtec b20/vtec gsr	RSS-Bot	Auctions	0	03-19-2009 11:03 PM
Honda vtec p28 p30 p72 tuned ecu ls-vtec b20-vtec gsr	RSS-Bot	Auctions	0	03-19-2009 09:36 PM
94 integra ls non-vtec to gsr vtec question...vtec not working.	muuurph	HYBRID -> EG-EK / DC	11	11-02-2008 01:57 AM
JDM Honda Acura B16A OBD-0 DOHC VTEC Engine Swap VTEC	RSS-Bot	Auctions	0	08-06-2008 03:36 AM
2000 ITR Integra Vtec head B18C5 B18C B16A LS/Vtec	RSS-Bot	Auctions	0	12-24-2007 11:23 AM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

04-24-2009, 02:38 PM	#3
CAFROG Senior Member Join Date: Apr 2009 Location: NOR-CAL Age: 33 Posts: 978 iTrader: 0 / 0% Ride: '92 Hatch si w/B16 (wannabe EG6) Rep Power: 26	Stock bottom end and stock VTEC top end (around 185-190hp to the CRANK not wheels)

04-24-2009, 04:26 PM	#5
CAFROG Senior Member Join Date: Apr 2009 Location: NOR-CAL Age: 33 Posts: 978 iTrader: 0 / 0% Ride: '92 Hatch si w/B16 (wannabe EG6) Rep Power: 26	Thats based on stock head and bottom end with the nastural compression change when applying a VTEC head to a non-VTEC bottom end (yes ITR or CTR will vary slightly. I sad stock....not tuned or chipped or ported or poor man type r. I said STOCK And the varences if all applications were STOCK...NO NO NO they WILL NOT VARY that much. Obviously the original poster is like MANY post that are terribly Vague and leave mounds of information unsaid. I gave him a ballpark figure that is VERY REALISTIC and gives him vague info based on the vague question. Thanks for filling me in on all the different heads...although I was already aware

04-24-2009, 07:13 PM	#7
monty92 Member Join Date: Jan 2009 Location: regina, sask Age: 19 Posts: 59 iTrader: 0 / 0% Ride: 92 integra gs, 03 sonoma zr2 Rep Power: 2	sorry a stock bottom end with the head off a 95 gsr

04-24-2009, 08:28 PM	#8
BLOWN-EK Junior Member Join Date: Aug 2008 Location: San Diego Posts: 18 iTrader: 0 / 0% Ride: 1998 HONDA CIVIC and a 1994 CIVIC HATCH Rep Power: 3	you should make around 165 whp

04-25-2009, 12:45 AM	#9
disableddan Crazy Insane Join Date: Sep 2008 Location: Edmonton Canada, Eh? Posts: 361 iTrader: 0 / 0% Ride: 1990 HB (K.I.A.), 2001 Coupe Rep Power: 21	You'll blow the welds on the intake making that kind of power.

04-25-2009, 01:08 AM	#10
D15Beater HNFTuning Join Date: Jun 2007 Location: Concord N.C. Posts: 548 iTrader: 0 / 0% Ride: or die.... Blog Entries: 1 Rep Power: 19	New issue of Project Car, 92 EG with a GSR LS/vtec. Obx cams, retainers, springs and aftermarket intake manifold. Dynoed 178hp to the wheels, ran a 9.7 in the 1/8mile. My old 91 Civic 4-door. B18a1 LS, 2000 LS B18b cams stock valvetrain, Obd2 B18b intake manifold and 4.44 cable transmission on street tires. never dynoed but ate Gsr swaps and ran a 9.5 in the 1/8 mile.

05-02-2009, 12:20 PM	#13
monty92 Member Join Date: Jan 2009 Location: regina, sask Age: 19 Posts: 59 iTrader: 0 / 0% Ride: 92 integra gs, 03 sonoma zr2 Rep Power: 2	would getting an after market computer like hondata be the best way to get more power? quick

07-14-2009, 07:33 PM	#14
monty92 Member Join Date: Jan 2009 Location: regina, sask Age: 19 Posts: 59 iTrader: 0 / 0% Ride: 92 integra gs, 03 sonoma zr2 Rep Power: 2	sorry i got more specs b18a block with a b18c1 head and p28 ecu, short ram intake and 2.5 inch exhaust? what numbers am i looking for an estimation horsepower torque? thanks