HondaSwap Forums http://hondaswap.com Discussion of what holds you to the ground. en Sat, 21 Nov 2009 00:53:09 GMT vBulletin 60 http://hondaswap.com/images/misc/rss.jpg HondaSwap Forums http://hondaswap.com Del Sol brake upgrade http://hondaswap.com/wheels-suspension-tires-brakes/del-sol-brake-upgrade-421811/ Fri, 20 Nov 2009 16:17:51 GMT no, they don't fit. ]]> Wheels / Suspension / Tires / Brakes B http://hondaswap.com/wheels-suspension-tires-brakes/del-sol-brake-upgrade-421811/ 92 accord rear disc conversion http://hondaswap.com/wheels-suspension-tires-brakes/92-accord-rear-disc-conversion-421039/ Thu, 19 Nov 2009 17:29:40 GMT the easiest way is to replace the whole trailing arm, knuckle, and upper arm. you can use the original LX soft lines and EX e-brake cables. discard... the easiest way is to replace the whole trailing arm, knuckle, and upper arm.
you can use the original LX soft lines and EX e-brake cables. discard the ABS sensors. one section of the exhaust heatshield needs to be removed to access the e-brake lines. one portion of the exhaust pipe will need to be unbolted but not removed. you will also need to remove your center armrest/e-brake cover to gain access to the cables at the lever.

i am not sure about the proportional valve, or master cylinder.
i believe the accord wagon has larger brakes and might be worth looking at for a front upgrade




Before



Off of the car



Comparison


Installed



hope that helps
Attached Thumbnails
Click image for larger version Name: 3D400.jpg Views: N/A Size: 40.4 KB ID: 12621  Click image for larger version Name: 3D401.jpg Views: N/A Size: 44.7 KB ID: 12622  Click image for larger version Name: 3D402.jpg Views: N/A Size: 41.4 KB ID: 12623  Click image for larger version Name: 3D403.jpg Views: N/A Size: 43.7 KB ID: 12624  Click image for larger version Name: 3D404.jpg Views: N/A Size: 48.5 KB ID: 12625  

]]> Wheels / Suspension / Tires / Brakes E_SolSi http://hondaswap.com/wheels-suspension-tires-brakes/92-accord-rear-disc-conversion-421039/ help me deduce these ENKEI whizzeeels http://hondaswap.com/wheels-suspension-tires-brakes/help-me-deduce-these-enkei-whizzeeels-419183/ Tue, 17 Nov 2009 02:52:04 GMT ha :) nice! ha :) nice! ]]> Wheels / Suspension / Tires / Brakes TurboMirage http://hondaswap.com/wheels-suspension-tires-brakes/help-me-deduce-these-enkei-whizzeeels-419183/ cheap coilover kit? http://hondaswap.com/wheels-suspension-tires-brakes/cheap-coilover-kit-417907/ Mon, 16 Nov 2009 22:07:05 GMT word sounds good word sounds good ]]> Wheels / Suspension / Tires / Brakes Thrust101 http://hondaswap.com/wheels-suspension-tires-brakes/cheap-coilover-kit-417907/ <![CDATA[need ur opinion, camber kits & LCA]]> http://hondaswap.com/wheels-suspension-tires-brakes/need-ur-opinion-camber-kits-lca-416676/ Mon, 16 Nov 2009 02:03:23 GMT not the cheep ebay ones with junk bushings not the cheep ebay ones with junk bushings ]]> Wheels / Suspension / Tires / Brakes 97hatch http://hondaswap.com/wheels-suspension-tires-brakes/need-ur-opinion-camber-kits-lca-416676/ Camber kit opinions http://hondaswap.com/wheels-suspension-tires-brakes/camber-kit-opinions-417567/ Sun, 15 Nov 2009 22:30:00 GMT Adjusted the bolts(re-torquing or something?), or just unbolted them and reinstalled them or loosened them and torquing them down("resetting" the suspension bushing so they're not binding)? ]]> Wheels / Suspension / Tires / Brakes K2e2vin http://hondaswap.com/wheels-suspension-tires-brakes/camber-kit-opinions-417567/ Question on 18x9.5in wheels http://hondaswap.com/wheels-suspension-tires-brakes/question-18x9-5in-wheels-415898/ Fri, 13 Nov 2009 00:01:39 GMT ---Quote (Originally by B)--- this thread is full of fail ---End Quote--- And it all started with my epic pic fail. Thanks photobucket. :(
Quote:
Originally Posted by B (Post 1491250)
this thread is full of fail
And it all started with my epic pic fail. Thanks photobucket. :( ]]> Wheels / Suspension / Tires / Brakes Matts96HB http://hondaswap.com/wheels-suspension-tires-brakes/question-18x9-5in-wheels-415898/ eg hatch http://hondaswap.com/wheels-suspension-tires-brakes/eg-hatch-411633/ Sat, 07 Nov 2009 14:31:00 GMT yes yes ]]> Wheels / Suspension / Tires / Brakes josh_crewdson@y http://hondaswap.com/wheels-suspension-tires-brakes/eg-hatch-411633/ wheel setup for my ek http://hondaswap.com/wheels-suspension-tires-brakes/wheel-setup-my-ek-413212/ Sat, 07 Nov 2009 12:09:44 GMT rotas are lightweight, cheap, common, and come in a lot of nice styles... thats why so many of the honda crowd buys them. if you want 16x7 wheels... rotas are lightweight, cheap, common, and come in a lot of nice styles... thats why so many of the honda crowd buys them. if you want 16x7 wheels you will want to put 205/45/16 tires on them. some people do 205/40/16 but that is actually slightly smaller than the oem diameter, plus more sidewall with the 45 series improves ride quality. ]]> Wheels / Suspension / Tires / Brakes mdpsEG http://hondaswap.com/wheels-suspension-tires-brakes/wheel-setup-my-ek-413212/ <![CDATA[13" crx si rims]]> http://hondaswap.com/wheels-suspension-tires-brakes/13-crx-si-rims-381417/ Fri, 30 Oct 2009 17:06:55 GMT ---Quote (Originally by DMaugle)--- 91 Civicsedaner; My son just had his 85 sideswiped and it crumpled one wheel and rashed the other one. Do you...
Quote:
Originally Posted by DMaugle (Post 1476103)
91 Civicsedaner; My son just had his 85 sideswiped and it crumpled one wheel and rashed the other one. Do you still have them? DaveM

Forget it. Buy your kid some aftermarket wheels. They will be cheaper, and he can smash them into whatever he wants. These are more of a collector item than a set of wheels for a kid to beat on. ]]> Wheels / Suspension / Tires / Brakes phyregod http://hondaswap.com/wheels-suspension-tires-brakes/13-crx-si-rims-381417/ ***fender rolling in riverside*** http://hondaswap.com/wheels-suspension-tires-brakes/fender-rolling-riverside-407835/ Thu, 29 Oct 2009 18:40:26 GMT if any is looking to roll there fenders i just bought the tool hit me up im in riverside of the 91 and central ave... u can email me @... if any is looking to roll there fenders i just bought the tool
hit me up im in riverside of the 91 and central ave...
u can email me @ george@fitbikeco.com or p'm me
or text me @ 909 418 7418
$100 for 4 corners
$60 for 2
or 70 to rent the tool
here's some pics check it out
i will put more pics up this weekend
dont roll your fenders with a bat it comes out bad i did it to me front ones before i bought the tool and it came out like shit
http://i173.photobucket.com/albums/w...g/IMG_5633.jpg
http://i173.photobucket.com/albums/w...g/IMG_5634.jpg
http://i173.photobucket.com/albums/w...g/IMG_5632.jpg ]]> Wheels / Suspension / Tires / Brakes georgesir83 http://hondaswap.com/wheels-suspension-tires-brakes/fender-rolling-riverside-407835/ Getting Expensive Highway Speed Vibration http://hondaswap.com/wheels-suspension-tires-brakes/getting-expensive-highway-speed-vibration-341718/ Wed, 28 Oct 2009 13:08:18 GMT Hello, Any news this matter what caused the vibrations? I have exactly the same problem with my Honda Accord 2.4 -03 CL9 (exactly the same as... Hello,

Any news this matter what caused the vibrations?

I have exactly the same problem with my Honda Accord 2.4 -03 CL9 (exactly the same as Acura TSX). But I also feel a small wobble from the front end when accelarating around 1800-2200 rpm in 1st 2nd and 3rd gear. I have changed only the driver side drive shaft but with no luck... I heard that the driver side were more abused.. so I wonder if I should change the other side as well. ]]> Wheels / Suspension / Tires / Brakes Mako http://hondaswap.com/wheels-suspension-tires-brakes/getting-expensive-highway-speed-vibration-341718/ Noise from the front wheel question... http://hondaswap.com/wheels-suspension-tires-brakes/noise-front-wheel-question-397552/ Mon, 26 Oct 2009 21:56:42 GMT Jack the car up and rock the tire back and forth, grabbing it at the top and bottom not the sides. If it has excessive play its a wheel bearing.... Jack the car up and rock the tire back and forth, grabbing it at the top and bottom not the sides. If it has excessive play its a wheel bearing. Rocking it as if you are turning isn't going to necessarily point you towards a bad wheel bearing, its more than likely going to determine tie rods being wore or your rack is bad. But since you said you have a skunk2 camber kit, take the A arm off and check the bushings. They are probably wore. I've learned that from experience. I have the same problem now. I also replaced the ball joint and it still did the samething. I'd check the bushings before possibly wasting $43 on a balljoint. ]]> Wheels / Suspension / Tires / Brakes Jizared97 http://hondaswap.com/wheels-suspension-tires-brakes/noise-front-wheel-question-397552/ black eg...bronze or gold rims ??? http://hondaswap.com/wheels-suspension-tires-brakes/black-eg-bronze-gold-rims-382937/ Mon, 26 Oct 2009 19:26:04 GMT Yeah I like the bronze ama have to get dem...I'm just earnin up my money...I found them 480 with tires the volks te-37 replicas....but the first eg looks clean wat kind of rims are those ? ]]> Wheels / Suspension / Tires / Brakes chacal06 http://hondaswap.com/wheels-suspension-tires-brakes/black-eg-bronze-gold-rims-382937/ Does anyone know.... http://hondaswap.com/wheels-suspension-tires-brakes/does-anyone-know-405878/ Mon, 26 Oct 2009 15:41:09 GMT yeah get some lighter ones yeah get some lighter ones ]]> Wheels / Suspension / Tires / Brakes AHHVTEC http://hondaswap.com/wheels-suspension-tires-brakes/does-anyone-know-405878/