HondaSwap Forums http://hondaswap.com Prelude chassis technical questions. en Fri, 20 Nov 2009 23:13:37 GMT vBulletin 60 http://hondaswap.com/images/misc/rss.jpg HondaSwap Forums http://hondaswap.com 97 Prelude with civic tranny? http://hondaswap.com/prelude/97-prelude-civic-tranny-420201/ Fri, 20 Nov 2009 01:35:04 GMT Quick update, the transmission shop the previous owner took it too was blowing smoke up his ass. it's the original tranny.

Thank you guys for your help. ]]> Prelude Romulus http://hondaswap.com/prelude/97-prelude-civic-tranny-420201/ Fidanza Flywheel / Pilot bearing question? http://hondaswap.com/prelude/fidanza-flywheel-pilot-bearing-question-421070/ Thu, 19 Nov 2009 07:02:07 GMT I have a fidanza flywheel, and I'm about to put the pilot bearing in it. Looking at the fidanza flywheel it looks like the pilot bearing goes in on the backside of the flywheel (the side facing the engine). It will not go in on the front side of the flywheel (the side facing the transmission) because the hole is too small for the pilot bearing to go through. Does anyone know if this is the correct side of the flywheel to tap the pilot bearing into? The picture in the haynes manual show the pilot bearing being tapped in on the front side of the flywheel ( the side facing the transmission). Can anyone confirm that the pilot bearing is tapped in from the backside on fidanza flywheels, and from the front on stock flywheels ? ]]> Prelude 34diesel34 http://hondaswap.com/prelude/fidanza-flywheel-pilot-bearing-question-421070/ 98 Prelude f20a to h22a swap http://hondaswap.com/prelude/98-prelude-f20a-h22a-swap-419072/ Mon, 16 Nov 2009 17:20:22 GMT Hi,

Have searched the forums for an answer but cant seem to find one to this simple question!

My engine blew on my 98' Prelude 2.0i (F20a) and was wondering how easy it is to put a 2.2 VTEC (H22a5) into it as a replacement? Are the transmission, wiring loom and block compatible?

Anyone predict any major problems or offer advice if you have done it yourself that would be great!

Thanks,

Michael ]]> Prelude Delta http://hondaswap.com/prelude/98-prelude-f20a-h22a-swap-419072/ <![CDATA[94' Si H22A]]> http://hondaswap.com/prelude/94-si-h22a-395075/ Sun, 15 Nov 2009 05:43:51 GMT holy you are dense

read the posts, get the cel codes, post back

i'm like 90% ur reversed ur tps and map ]]> Prelude RoughKnight http://hondaswap.com/prelude/94-si-h22a-395075/ got problem wondering if i can get help http://hondaswap.com/prelude/got-problem-wondering-if-i-can-get-help-417712/ Sun, 15 Nov 2009 00:49:53 GMT honestly it sounds like you bought a lemon. I would start by checking to see if i had good compression, or check fuel psi, it could be a lot of... honestly it sounds like you bought a lemon. I would start by checking to see if i had good compression, or check fuel psi, it could be a lot of diffrent things really, maybe your dizzy died ]]> Prelude http://hondaswap.com/prelude/got-problem-wondering-if-i-can-get-help-417712/ JDM H22 swap, noob needs help. http://hondaswap.com/prelude/jdm-h22-swap-noob-needs-help-414488/ Tue, 10 Nov 2009 12:22:13 GMT some times when you do a jdm h22 swap into the 92-96 preludes the fans will no longer work. this happened to mine. did the h22a swap in my 92 lude... some times when you do a jdm h22 swap into the 92-96 preludes the fans will no longer work. this happened to mine. did the h22a swap in my 92 lude also. so try running a hot wire to see if the fans will kick on then. if so and you have checked all fuses and what nots. then i would say just run you a toggle switch to control the fans. ]]> Prelude DESPAIN http://hondaswap.com/prelude/jdm-h22-swap-noob-needs-help-414488/ distributor wiring for f23a1 http://hondaswap.com/prelude/distributor-wiring-f23a1-402994/ Tue, 10 Nov 2009 05:57:06 GMT I just done the same thing to my 92 Prelude....I ran a hot wire from the only hot wire from the ciol plug to the 94 accord ex distrib.Open the... I just done the same thing to my 92 Prelude....I ran a hot wire from the only hot wire from the ciol plug to the 94 accord ex distrib.Open the distrib. an follow the wire from the internal coil jump the wire across an she will fire up...And then you will have to replace the ECU with a 94 accord Vtec one... http://hondaswap.com/general-tech-articles/how-wire-vtec-40811/I hope this helps .:FFS TechNet : OBD1 ECU Pin out Schematics :. Let me know if this does it for you..Make sure you change ALL the sencores...I even used the Hmodel throddle body on the intake made a big deffrence...Oh yea make sure you swap A6 to A11 on your ECU..... ]]> Prelude runningbull http://hondaswap.com/prelude/distributor-wiring-f23a1-402994/ orange light on dash. picture of an engine saying check http://hondaswap.com/prelude/orange-light-dash-picture-engine-saying-check-412807/ Fri, 06 Nov 2009 21:45:52 GMT pull the codes, it'll explain everything ]]> Prelude eg6sir http://hondaswap.com/prelude/orange-light-dash-picture-engine-saying-check-412807/ <![CDATA[91' Prelude Si, h22 engine swap questions, please help!]]> http://hondaswap.com/prelude/91-prelude-si-h22-engine-swap-questions-please-help-92713/ Fri, 06 Nov 2009 20:24:24 GMT
Quote:
Originally Posted by chris gillespie (Post 1486216)
Don't do it
Dude, this thread is two years old. Next time, check the dates before you hit the "submit" button. If anybody actually has anything of relevance to add to the information in this thread, please PM me and let me know. Otherwise, this thread is done.

:locked: ]]> Prelude BrutalB83 http://hondaswap.com/prelude/91-prelude-si-h22-engine-swap-questions-please-help-92713/ New Prelude, not a good start. http://hondaswap.com/prelude/new-prelude-not-good-start-404026/ Fri, 30 Oct 2009 19:59:56 GMT Ok cause i ordered the ball joints, didnt specify for SH or not so i assume universal. Lets hope, $1000 just to get 2 ball joints are absolutely... Ok cause i ordered the ball joints, didnt specify for SH or not so i assume universal. Lets hope, $1000 just to get 2 ball joints are absolutely ridiculous. ]]> Prelude Justin66 http://hondaswap.com/prelude/new-prelude-not-good-start-404026/ 1996 prelude S--F22a1 to H22a1 http://hondaswap.com/prelude/1996-prelude-s-f22a1-h22a1-160113/ Thu, 29 Oct 2009 12:32:39 GMT look just get a h22a with tranny ecu and axles. its not a hard swap to do! then have fun! look just get a h22a with tranny ecu and axles. its not a hard swap to do! then have fun! ]]> Prelude DESPAIN http://hondaswap.com/prelude/1996-prelude-s-f22a1-h22a1-160113/