Seany-izzle

of hf manifolds (or cx or vx) with adaptor plates?

fmu and missing links?

wrx stock intercoolers??

what about t25 or 14b turbos?? what kind of power would i be looking at with a internally stock d16? other mods would include 450cc injectors and fuel tuning.

all positive and negative feedback would be great!

__________________
My name is Sean.

TWAN

Not to discourage you from HS, but try homemade turbo. That is all these guys do, they pisce together parts from different cars and attempt to make their own turbo kit.

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

TWAN

Also... I have a greddy kit that is slightly used, and is almost complete (minus downpipe, oil pan flange, and piping. I am thinking about selling. includes BOV, FMU, Profec b, and a Starion intercooler.

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

Seany-izzle

ive been there, i just wanted other opinions as well. ive been there many a time. apparently they think its a pretty decent setup (t25's and hf manifolds).

__________________
My name is Sean.

TWAN

Also read about how many motors they have blown up

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

TWAN

I personally wouldnt try it, Too many places for stuff to go wrong being that none of the pieces are made to work together

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

TWAN

and to build a custom kit CORRECTLY will cost around the same as a kit that was made for your car

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

TWAN

trust me i was origonally going to do the homemade thing

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

Seany-izzle

fuckin christ, post all in one post...its called edit button

__________________
My name is Sean.

TWAN

OPPS!!

__________________
Loco Honkey:

Are you retarded, or did your dad breast feed you when you were a kid?

EGVortechGSR

Homemades arn't soo bad, it's when there done wrong. With an FMU you won't need 450cc injectors, i'm running RC 310's on my B18c and they work fine.

__________________
92 civic dx, B18C, Vortech supercharger, JDM ITR header, Falken Azines sport tires, 95 GSR Radiator

Best run:13.73@102.4mph with full interior, full catylitic converter, 91 octaine gas, and falken azines sport tires on 20psi, bad launch 2.19 60ft!!!! Still no traction!!! I will be low 13's very soon.

Loco Honkey

STD manifolds have bigger ports. Even better would be a '96+ non- EX D series manifold.

FMU is good for sub- 10 PSI setups.

Missing link is great if you're using an FMU. Basically, you NEED it.

WRX stock ICs are great, but might be kinda hard to make work as far as plumbing routing in the front of a Civic.

T25- go drive Travis's car. 14B is about the same, but will make a wee bit more power. As for power potential, with an FMU, no more than 200 crank HP. With bigger injectors and an AFC, maybe 225 wheel HP.

Stay as far away from Startion ICs as you can. The Mitsu guys laugh at all the Honda owners running them because the Mitsu guys know they suck.

cws13

Haven't seen one yet but talked to the guys at Slowboy racing- they claim to be offering a pretty comprehensive SOHC kit with IC, T25 and all of the goodies for about 1200.00

__________________
1320 Motorsports Athens,GA

<a href=\'http://www.1320motorsports.com\' target=\'_blank\'>1320 MOTORSPORTS</a>