ASAP!!!!97dx with a ex engine harness and a ls vtec ...help me

We may earn a small commission from affiliate links and paid advertisements. Terms

kingzues

New Member
ok so I need to know if the ex harness will worl on a dx car and if so what do I need to do for it to work ...will all my dash work .. Is it a simple plug and play ..I am going to be doin the obd1 jumper so I just need the motor wiring info dash in please help asap
 
its fairly easy i used this harness for my h22 swap with a jumper so you should be fine what engine you running??
 
where does the obd1 come into play? Is the harness from an obd1?
If so the harness will not plug and play on your 97 without jumpers for you dash.

Also with an EX harness on A DX car your dizzy plugs will not match and your vtec plugs from the EX harness will not be utilized. Again, jumpers or some fab work will be needed.

Good luck:D
 
LS VTEC...so he would use the VTEC on the OBD2 EX wiring harness. If he isn't using a OBD2 harness...and a OBD2 motor....he has lots of problems to figure out. He might be jumping the harness in the kick panel to run an OBD1 chipped ECU and be running all OBD2 under the hood....at least that's that I'd do and head straight to the tuner.
 
LS VTEC...so he would use the VTEC on the OBD2 EX wiring harness. If he isn't using a OBD2 harness...and a OBD2 motor....he has lots of problems to figure out. He might be jumping the harness in the kick panel to run an OBD1 chipped ECU and be running all OBD2 under the hood....at least that's that I'd do and head straight to the tuner.

yeah didnt tell him that part i thought that wuold be a no brainer there, my bad,but yeah you are right i ran the obd2 harness and ran the p13 chipped and went to tulsa,OK. to get it tuned........:eek:
 
You did say....in the title of the thread. Please get it tuned ASAP (for the sake of your motor and the time/money you put in it). If you take it to someone who knows LSVTEC's....it'll run you $200-300 and you should be safer.
 
ok the guy gave me a 99 ex harness .and I need a 96-98 harness . So I'll have the rite one tomarrow and see were I stand .. And I will be a obd2a to obd1 jumper harness and getin it tuned asap ..
 
Back
Top