this is wat ive been up too lolol

We may earn a small commission from affiliate links and paid advertisements. Terms

efalex

New Member
ip8pld.jpg

20jju4h.jpg

sngepc.jpg

i1csao.jpg

my cars current set up right now-
stock ls vtec on 6psi
00 b16 head with gsr cams
95 ls tranny
91 ls block
71mm unknown turbo
greddy bov
greddy fmic
ebay 2.5in charge piping
log manni
xs power w/g
680cc injectors
basemap on aem
 
Sexy as hell, except the hood gap in the back, whats up with that?
 
thats the m@d tYte jADem hood tilt

noo i cut out the bottom of the hood and the waste gate still hits even tho its tilted from the back it raises it enough in the front to clear lol and no thats the ols school xs power wastegate when there products were decent
 
noo i cut out the bottom of the hood and the waste gate still hits even tho its tilted from the back it raises it enough in the front to clear lol and no thats the ols school xs power wastegate when there products were decent

doesnt matter.. its still the m@d tYte jADem hood tilt
 
noo i cut out the bottom of the hood and the waste gate still hits even tho its tilted from the back it raises it enough in the front to clear lol and no thats the ols school xs power wastegate when there products were decent

i cant recall a time when xspower made good stuff?
 
Car looks sick. I would fix the wastegate so you can fix the hood though. But I even like what you did with the front bumper. Looks clean.
 
Carnage pics?
ill try n get pics tmw but nothing to bad.. it leaned out.. did a comp test cyl 2 0 comp.. put a nice hole in piston 2 and cracked ringlands in the other 3... the block was kinda fucked b4 we even boosted it tho idk man lol
 
Back
Top