new need help

[92hndacc]

i resently purchsed a 92 accord with a stock f22a n i want to go dohc what do i need to do can i just swap the head or do i need to swap the whole eng

 

[95h22Accord]

What are u lookin to spend?

 

[92hndacc]

1500 but i wanted to know if i can do anything with f22a block n just swap the head. i still need pain n a lowering kit n suspension

 

[BrutalB83]

Yes, you can do a head swap. An H23 or a dual-cam F22B head should be pretty much a bolt-on affair. H22 is doable, but is a tiny bit more complicated. For $1,500 though you could probably find an entire H22...

 

[92hndacc]

would i use the stock h23 or f22b tm blt

 

[MurderedCD5]

first of all there are no duel cam F22Bs F22Cs yes but that is out of the S2ks. the H22 and H23 are the same head. if you want a good swap, then drop in a H22 or H23 engine. It will be easier and more reliable. and $1500 is enough if you shop around.

 

[BrutalB83]

first of all there are no duel cam F22Bs F22Cs yes but that is out of the S2ks. the H22 and H23 are the same head. if you want a good swap, then drop in a H22 or H23 engine. It will be easier and more reliable. and $1500 is enough if you shop around.

Sorry, but pretty much everything you just said is straight up WRONG. Next time, research before you post...

EDIT: I was on my phone when I responded before, so I'll take the time to elaborate a bit now.

The H22 and H23 heads are NOT the same. The H23 heads are non-VTEC (for the most part). There is a rare JDM VTEC H23 engine that's pretty similar to the H22, but most often when you're talking about an H23, you're referring to the 160 horsepower non-VTEC dual cam engines that came in the 92-96 Prelude Si models here in the United States.

And yes, there IS a dual-cam F22. It's a JDM motor and it's very similar to the USDM H23 (dual-cam, non-VTEC, about 160 horses). Look it up.

Like I said, don't just assume you know things. Next time, look in to it and see if you're right before you answer...