FS:BRAND NEW DART BLOCKS

[reikoshea]

Well, my friends finally took my advice and jumped into the import world of engine building.

Tim Allen Motorsports
(214) 391-7562
626 Southeast Dr
Dallas, TX 75217

I am just starting on the web page, but we are distributors for Dart, JE/SRP, Comp Cams, Eagle, Corillo, Oliver and whole lot more.

I am going to get prices for the b-series block, but if you call and say you heard about him from Fritts on Hondaswap, he said he'd cut yall a pretty good deal on the stuff. Dart doesnt make full blocks for H or D series, so if you want that stuff done, he can sleeve your blocks for you as well.

http://timallenmotorsports.net

As i said, im making the website, and he needs his price sheets for the customer calls that he gets. I should have all the block prices updated by next weekend and hopefully have the entire site (heads and all) ready by early december.

If you want a full engine, extra work done (sleeving, assemblying, boring, etc), or you just need parts for your engine (D, B and H series included) this is the guy to call.

**EDIT**

Dart B-series (B18 and B20) Blocks

$2129.40 Free Shipping anywhere in the US

Dart B-series (B18 and B20) heads
$3031.69 Built (no cams) with Free Shipping
$2568.28 Bare with Free Shipping

JE Pistons

B, H, and K series
$123.47 each (493.88 per set) with Free Shipping in the US.

Eagle H-beam Rods for all Honda/Acura
$350.00 with Free Shipping

Zex Dry Nitrous For Honda/Acura
$539.95 with Free Shipping

Zex Wet Nitrous For Honda/Acura
$599.95 with Free Shipping

Zex Direct Port Systems
$709.95 with Free Shipping


BUT AGAIN, CALL FOR BEST PRICES. AND TELL THEM FRITTS SENT YOU.

If you have any question on parts, just leave me a PM or post it here, i should have most of the answers you need. We can also build bottom ends and just about do everything you will need. Only thing we cannot do is PnP heads really.

 

[1fasteghatch]

i want to sleeve my ls block to 84mm with dart sleeves. how much would this run me?

 

[reikoshea]

that however is a question you will have to ask tim himself (m-f 8a-4p CST).

I can tell you that the quote i got on my H22 was $800 including the cost of sleeves. I cant tell you what kinda deal he was giving me...weve gone to church together for a while and i dont haggle with him on prices.

By the way, Darton makes sleeves, Dart makes blocks.

 

[1fasteghatch]

Quoted post[/post]]
that however is a question you will have to ask tim himself (m-f 8a-4p CST).

I can tell you that the quote i got on my H22 was $800 including the cost of sleeves. I cant tell you what kinda deal he was giving me...weve gone to church together for a while and i dont haggle with him on prices.

By the way, Darton makes sleeves, Dart makes blocks.

i was wonderin bout the dart/darton thing when i was typin it. ill give him a call

 

[reikoshea]

bumpity

 

[civicious]

 

[reikoshea]

Not that Tim Allen, but hey, you gotta use what name recognition you can, right?

Bet you wont be forgetting him anytime soon...specially since you live in lufkin

 

[reikoshea]

Bump for the edit on prices.

 

[1fasteghatch]

i called but no answer. how much for a set of je 84mm pistons, 9.1 comp.?
o and for a b series motor

 

[reikoshea]

493.88

Tim was at his house working with me on his website on friday, so if you called us then, that might be why no one answered. Usually itll go to Voice mail though

Call him again, he might be able to give you a better price, but i am only authorized to advertise certain prices.

 

[reikoshea]

bump for new products and pricing

 

[reikoshea]

back to page 1

 

[egoSH]

By the way, Darton makes sleeves, Dart makes blocks.

Darton east build's blocks tho, they dont make uhm but they do build uhm =]

 

[reikoshea]

thanks for the bump. at least i know the link in my sig works

 

[RoryBreaker]

Are there any issues with shipping to Canada? (other than the obvious freight costs)?

 

[reikoshea]

I know tim has done it before. just give him a call during the business week and let him know what you want. Ive been concentrating on my day job lately, so i havent been to the shop in a few months.

(214) 391-7562