ecu code 2 long 3 short ?pr3

We may earn a small commission from affiliate links and paid advertisements. Terms

C

cvccricebaby@yahoo.com

New Member
:confused:2 long 3 short all pause the same like
/ = long . short += pause

/ + /+...
i have no idea
B16 Pr3 OBDO
i looked every where and still
not sure i read a quick flash = 1
a long flash =10
but i have 2 long with pause
thanx:
 
Blanco said:
Looked everywhere...except the reference section where the ECU error code chart is. :p
Click to expand...
i looked there but didn't tell me how to read it
but ya it has the code there smart ass
if you don't want to help some one why post crap.
or post at all!
 
well learn to read because it does tell you how to read it.. you answered your own question in the first post..
 
Black Widow g2 said:
You're welcome. Let us know what happens. :)
Click to expand...
the long flashes through me a lill i was thinking it was the knockseen it was cracked now its gone and have a new one.
i don't know if the vtec works yet im sure it is
doing the brakes know .
i didn't know how to read the long flashes i do now thanx
hay still learning lol.i only had one code runs great.
 
what i was saying for this post what i wanted to know was the code read like what the long flash is and what the short is
were the hell in that form did it explain what i wanted
like what i found in a diff place
long flashh = 10 short =1
thats what i wanted to read in the damn ecu
but here you are
still have no clue as to what i want
after its done and was told to me
you still think that post is what i was after
read the top it will tell ya.
my panties are fine like 'em in a bunch.
the support is great thanks.
 
Last edited:
I think it's because you were unclear. If you understood a long 'blink' denotes 10, and a short denotes 1, you could 'read' the code because you stated it's 2 long, 3 short. That equals 23. Ex: ________ =10, ________ =10, ___ = 1, ___ = 1, ____ = 1, therefore, 10+10+1+1+1 = 23. I think it's not clear how you couldn't read the code.

In that forum (using the above formula and realizing what the code was) you could look up the number 23 and see it refers to the knock sensor.
 
can you show me like the formula above how it blinks to you and insert (long pause) like so...? That way I can help you. I'm confused now after looking at how you tried to write it out. Is it: ______ _______ ___ ___ ___ (long pause) or is it: ______ ___ (long pause)

?

The second denotes a code 11 but from what I know there is no code 11
 
that is all i wanted im not saing i know about the obdo ecu
i don't so i wanted to find out if all the long flash was 10
when the code off the ecu was flashing i didn't know the code cuz of the pause
i was thinking more than 1 code
so i wanted to make sure that all the codes were done so i asked
about the code reading
i have it know
this was that that hard that post didn't tell me alot yes it did say 2 long 3 short is 23 but did not explain much like how far the codes go 22-23-24- or the
note i know thw usdm obdo has only 1 flash but the two together with the long flash / with out a book i didn't know
with all the crap i had to get for the car i didn't get the chilt.. soo i asked here
thanks for all the posts guy
it was fun lol ...
lol don't get too pissy it was done i fixed it and now know the codes for the pr3
 
Black Widow g2 said:
I think it's because you were unclear. If you understood a long 'blink' denotes 10, and a short denotes 1, you could 'read' the code because you stated it's 2 long, 3 short. That equals 23. Ex: ________ =10, ________ =10, ___ = 1, ___ = 1, ____ = 1, therefore, 10+10+1+1+1 = 23. I think it's not clear how you couldn't read the code.

In that forum (using the above formula and realizing what the code was) you could look up the number 23 and see it refers to the knock sensor.
Click to expand...

this is what i wanted from the start and thanxs BlackWidowg2 for all the help
 
ya you might be right after all the work on the car with 2 1/2 kids you get burrned out i should stay away from cars lol.

it was a stupid question but didn't know,
i don't wright books so not good at the explanation on typing
 
attitude started with the coment.
not your prob but then you keep going
lol thats the sad part you must feel left out
i must not have said thanx for your help to ya lol
sorry thanks
 
You must log in or register to reply here.
Back
Top