So I wrecked my SI hatch

We may earn a small commission from affiliate links and paid advertisements. Terms

R

RcRacing72

Junior Member
Cars parted out and junked, motor is still good. Its a Sohc Zc non-vtec.
I'm wondering if I should look for a civic/crx shell and drop the motor in.
Looking for some off hand experience if this motor has some potential with some building. and if it does turbo or n/a

I want another honda/acura I know that. ls/vtec crx sounds real nice in the future.
I would like to spend 2 - 3k on a ready to roll car.


I miss my ef tho :(
 
A Rolling EF. Ass end spun around coming out of a corner....I'm assuming the brakes locked up. went into this guys front yard. hit a drainage ditch, rolled, and landed in his garden lol.
 
DSCF0093.jpg
 
Blanco said:
The kid down the street from me died in a rollover in an EK hatch. Looked very similar except his driver's side A pillar was about two feet away from the seat bottom. He'd just turned 18.

You have no business driving fast enough to do that in a residential area. That's flat out irresponsible and you're lucky you didn't die.
Click to expand...

Seriously, not only were you endangering your life, you were endangering the life of anyone in the near vicinity of the accident. What if someone had been in that garden? What if you wrecked your car and committed murder at the same time. Next time think before you do something that stupid. If you really like going that fast, look for some local AutoX event to go to. Most places have them.
 
I agree with your criticism's but that wasn't the seen of the accident. It was in the country, and yes that would of sucked if someone was in the garden. But ya my mistake,hopefully I learn from this.


another si taken to the grave!
 
damn sry bro..how much you want for the front and rear bumper covers... and is the motor a d16a6??if soo how much for a complet head(minus the dizzy,intake manifold,and valve cover)
 
RcRacing72 said:
Cars parted out and junked, motor is still good. Its a Sohc Zc non-vtec.
I'm wondering if I should look for a civic/crx shell and drop the motor in.
Looking for some off hand experience if this motor has some potential with some building. and if it does turbo or n/a

I want another honda/acura I know that. ls/vtec crx sounds real nice in the future.
I would like to spend 2 - 3k on a ready to roll car.


I miss my ef tho :(
Click to expand...

INJEN78 said:
damn sry bro..how much you want for the front and rear bumper covers... and is the motor a d16a6??if soo how much for a complet head(minus the dizzy,intake manifold,and valve cover)
Click to expand...

roninallout79 said:
Do you still have the dash harness and ECU? Need one to convert my DPFI to MPFI.
Click to expand...


there you go, READ THE FREAKING FIRST POST IN THE THREAD BEFORE YOU HIT THE REPLY BUTTON. he said the cars parted out and junked and all he kept was the engine.

sorry you wrecked your car but it looks like you had stock suspension, and you said the brakes locked up? sorry bout your luck, glad you not dead. i however would have killed you for ruining my garden.
 
You must log in or register to reply here.
Back
Top