accord header ?

[need2bfaster]

im not 100% sure but i think i saw a dc header on an f20b4 engine at a junk yard the guy said like 100$ i can have it does any one know if it will fit an f22a1 or are the ports spaced diff?

 

[AHHVTEC]

not sure but im sure you can get a new one on ebay for cheaper

 

[need2bfaster]

a dc header for under 100$

 

[AHHVTEC]

dc is junk, this cheap ebay one will be just as god as the used dc,or 30 more bucks for the obx
eBay Motors: 90-93 HONDA ACCORD HIGH FLOW HEADER 91 92 DC-C DX LX EX (item 320196708883 end time Dec-19-07 15:30:30 PST)

eBay Motors: OBX Exhaust Headers 90-93 Honda Accord 4CYL LX EX SE DX (item 180194560271 end time Dec-19-07 22:52:25 PST)

 

[need2bfaster]

i got an ebay one liekthe whole exhaust i heard that the they crack

 

[AHHVTEC]

i got an ebay one liekthe whole exhaust i heard that the they crack

they can but i think id chance it rather then buy a used dc

 

[need2bfaster]

true and thanks ill justt stick to the ebay header i have now then

 

[AHHVTEC]

true and thanks ill justt stick to the ebay header i have now then

lol do you already have a header on your car

 

[calmfornow]

take em

F22a1 and F22a4 will work. If i were you i would grab them and run. cheap price and when u take them off and if they are not smashed up or cracked you will be fine, so ur answer is yes

 

[need2bfaster]

yeah i got an ebay header on my car now i asked about the dc header cause mine started to get loud so i thought it was cracked here i looked and the nuts vibrated lose and thats whyit rattles so ill just stick with the ebay header

 

[BrutalB83]

yeah i got an ebay header on my car now i asked about the dc header cause mine started to get loud so i thought it was cracked here i looked and the nuts vibrated lose and thats whyit rattles so ill just stick with the ebay header

Did you torque the nuts to spec when you installed the header? That's wierd that they came undone. If it's been like that for a while you might want to get a new gasket and then use a torque wrench to tighten the nuts down to the proper tightness.

 

[Uncle Buck]

all the F and H series motors are exactly the same block casting....

but the heads are different.....

H23 and the F22 use the same bolt pattern....

H22 and the F20 use the same bolt pattern...

those are the only combos you can use

 

[need2bfaster]

i blew a gasket and thats how im guessing they came lose