Fancy Bolt Kits!

We may earn a small commission from affiliate links and paid advertisements. Terms

Motiv race

New Member
I'm offering the same ones that garage works guy was selling for 50.00 for 20 spray painted washers! :thumbdown:


But i'm going to make my deal much more sweeter.

Most of you guys found the washers and the bolts on the fastenal's site, and realized you can order them up for cheaper than he was selling him. I was in the same boat, I ended up ordering from him, and when they came in they were all chipped up and were pretty much garbage. (I ended up wire-wheeling mine down and making them silver again.)

So, I decided to hit up another bolt store (not fastenal) and get the bolts/washers. I got them in the correct sizes, not ones that are only going to screw in about 1/4 of the way in a fully threaded hole, and i got all stainless not steel bolts! He was offering the stainless ones as well but for 15.00 more I think it was.


So, lets cut to the chase.

i'm offering these washers and bolts in a 20 piece kit. These are enough to do an ef/eg/da/ek/em1/em2ep3 engine bay, and with 5 left over in case you find somewhere else you want to put them!

The washers will NOT be spray painted. I am offering the washers POWDERCOATED, so they will not scratch or crack up like the spraypainted ones will. I am also offering the bolts POWDERCOATED as well for an extra 5 dollars.

Also, to make this deal much sweeter for you guys. I know alot of you guys that are ordering these have freshly painted bays, shaved bays, and are very anal about their paint/look. The kits will come with the same amount of RUBBER washers that lay down first to keep from scratching or cracking of the paint when installing the bolts/washer combo.

So, Recap:

-20 Bolts (Enough to do a complete honda engine bay with 5 to spare)
-POWDERCOATED, No cheap Sh33t here!
-Rubber washers that lay under the metal washer so you don't scratch your sh33t!
-I'm not going to rip you off.

Here is a picture of the combo I am offering. These are the CORRECT sizes and LENGTH!

IMG_1688.jpg

IMG_1689.jpg

IMG_1690.jpg

IMG_1691.jpg

IMG_1692.jpg

IMG_1693.jpg

IMG_1695.jpg

IMG_1547.jpg

IMG_1544.jpg

IMG_1643.jpg

Wrinkle Red:
IMG_1634.jpg




Now, I'll be getting pictures up tomorrow or wednesday of some done in color!

Standard Colors are: Candy Red, Candy Blue, Candy Purple, Candy Orange, And Mirror Black!

Custom Colors are available for an extra $10.00

Colors available for custom are below:

Colors candys !
red,
blue,
orange
purple
gold
green

Reg colors!
yellow
satin black
flat black
glossy black
mirror black
red
red wrinkle
Silver
Met silver
mirror silver
chrome
Neon pink
neon yellow
dark green
white


PRICES!:
Kit 1 - 20 washers powdercoated with BLACK STEEL BOLTS : $40.00 Shipped
Kit 2 - 20 washers powdercoated w/ SILVER STAINLESS BOLTS : $50.00 Shipped
Kit 3 - 20 washers powdercoated w/ SILVER STAINLESS BOLTS + Rubber Washers : 55.00 Shipped
Kit 4 - 20 washers plain w/ black bolts : $20.00 shipped
kit 5 - 20 GOLD washers w/ black bolts: $32.00 shipped
Kit 6 - 20 GOLD washers w/ Stainless Bolts : 40.00 shipped
If you must know, after all said and done. I am making $5.00 a kit, just to make up for my time in running to the powdercoaters and post office.


I accept, debit/credit, paypal, and money orders. All credit card orders will be done through Secure Google Checkout. This making it secure because your credit card number will never be revealed to me.


All washers will be shipped in a padded box and each washer will be on a ziptie with construction paper in between so there will be no scratches in shipping!


Each of these kits will fit:

-ALL HONDA's
-02+ WRX/STi
-EVO
-1g and 2g DSM's


These do Hood, Fenders, Headlights, and radiator support bolts!

If a vouch list is needed, please inquire!


AIM: ek20a2
Email : ek20a2@aim.com
Phone : Avail in pm's!


Modified by onefastegg at 4:19 AM 1/29/2008
 
Last edited:
those prices make it not worth my time to go get this done myself. so. good job.

i like the look of the purple ones, they look anodized or whatnot. can you get blue like that? if you can, i'd like to see a picture if possible.

if you cant, i'd like to see a picture of candy blue and/or blue if possible. if they look good, i'll get them with stainless screws. i'm tucking my black car's bay with neon blue wire sheeth and flat blue valve cover, among other accents. those would probably go good.
 
those prices make it not worth my time to go get this done myself. so. good job.

i like the look of the purple ones, they look anodized or whatnot. can you get blue like that? if you can, i'd like to see a picture if possible.

if you cant, i'd like to see a picture of candy blue and/or blue if possible. if they look good, i'll get them with stainless screws. i'm tucking my black car's bay with neon blue wire sheeth and flat blue valve cover, among other accents. those would probably go good.


The purples in the picture are Candy purple. so candy blue would have the same shine to it!

I will have pictures of ALL the colors next week. Candy Blue, Candy Red, Candy Orange, Mirror Black, Candy Purple.
 
The purples in the picture are Candy purple. so candy blue would have the same shine to it!

I will have pictures of ALL the colors next week. Candy Blue, Candy Red, Candy Orange, Mirror Black, Candy Purple.

ok awesome i'll be eagerly awaiting. i'm aiming to have this all done by summer!
 
Candy orange pictures were just added in the first post! They also show how they will be shipped. All padded as well in bubble wrap!

The rest of the colors will be posted on tuesday: Candy green, candy purple, candy red, candy blue, and mirror black!
 
Back
Top