double0Si

I just moved out here to Naperville, IL from Ohio and I was wondering if anyone new some good shops out here. I need to swap engines in my 2000 Si and I dont have anything out here to do it with. New engines coming in Tuesday and I need it done ASAP. Anyone know the right shop for the job? Thanks

serrilion

naperville il performance shops - Google Maps

pic 1 lol!

__________________
yea so a guy told me, "I bet I get laid twice as much as you," so I said, "Two times zero is still equal to zero," totally awesome.

Well, a penny saved is worth two in the bush, isn't it?
And don't cross the road if you can't get out of the kitchen.

double0Si

yea, i kinda did that, but I dont think Ill be needing to swap a B16 into my 10 speed lol. So no bike shops for me. And I do love muscle cars but I dont think theyll be jumping for joy when I roll in with a Civic. Im kinda looking for good and known to be trustworthy Honda shops. I do appreciate the effort though!

serrilion

it was a lazy stab, what can i say, im at a pool hall with some hot gals lmao, sorry 1/2 distracted!

__________________
yea so a guy told me, "I bet I get laid twice as much as you," so I said, "Two times zero is still equal to zero," totally awesome.

Well, a penny saved is worth two in the bush, isn't it?
And don't cross the road if you can't get out of the kitchen.

MthaFuknGreen

youre at a pool hall with hot gals and your on hondaswap?
they must not be giving you any attention.. lol

__________________
fuckin mustangs..

Go Green
^go listen.
its me.

serrilion

They are haha! Just 2 smoke , I don't and the other 2 are taken but in the bathroom doing what ever girls do, so me and the boys had a spare min too look up that WTF vid I posted lmao!

__________________
yea so a guy told me, "I bet I get laid twice as much as you," so I said, "Two times zero is still equal to zero," totally awesome.

Well, a penny saved is worth two in the bush, isn't it?
And don't cross the road if you can't get out of the kitchen.

YBLEGAL

Top Setup in Palatine IL is a fairly good shop from what I've heard. I've had no direct interactions with them but 2 of my good friends have. One more than the other. Mainly got a type-r suspension put on his EG, and a D15B swap. The owner, Charlie, has even been featured on Best Motoring, and Tsuchiya loved his K powered EG hatch. If you want to look up the video (on youtube for sure), it's American Touge 1, 2, and 3 I believe (he's in all 3)

BTW I'm over by Gary IN.

__________________

double0Si

Thanks, Ill have to check them out. I drive near Gary every time I go back to Columbus then shoot straight down to Indy.

YBLEGAL

Well, just to make it known that I don't live in America's Armpit, Gary, I actually live in Portage.

__________________

Korax

I always thought the armpit of America was all of New Jersey. Canton OH, and Denora PA, are close seconds. I have been to a lot of shitty places .

__________________

PSN: Korax37

double0Si

Funny you should mention Canton, that is where I bought the car getting no oil to cylinder two (the reason behind this post.)

97hatch

you could just drop it off on your way home one weekend Ill do the swap im close to indy and can have it done by sunday night

__________________
SOME PEOPLE ARE LIKE SLINKIES. NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.

HATCHET_HONDA

theres a shop called ONE6MOTORSPORTS 847-593-9490 in elk grove village il. the owner is a sooper nice guy. they specialize in all things honda. its where ive bought all my b16 swap parts.

__________________
admit it..your a ricer....

90 si hatch jdm d15b swap(done)
91 dx hatch b16 swap (in progress)

b16a block
95 gsr p&p head
skunk 2 valvetrain
stage 1 cams
type r bottom end
tri y header
stage 3 act clutch ftw

double0Si

Only problem with that is its not running and no offense but I'd rather be there while its getting done. If you'd be willing to help and I can find a way to get it down there that'd be awesome. Ill have to look into that

97hatch

pm me maby we can work some thing out i aint doing it for free though i have a lift and all other esentials. You will have to let me know in advance as i do lots of transmission work in the evenings at home and waiting on parts can tie up the lift for a few days at a time.

__________________
SOME PEOPLE ARE LIKE SLINKIES. NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.

HATCHET_HONDA

you have a lift?? lucky mofo.....

__________________
admit it..your a ricer....

90 si hatch jdm d15b swap(done)
91 dx hatch b16 swap (in progress)

b16a block
95 gsr p&p head
skunk 2 valvetrain
stage 1 cams
type r bottom end
tri y header
stage 3 act clutch ftw

97hatch

when you work on cars for a living you tend to do lots of side work. A lift is one of the most importand tools that you can have and depending on how you look at it they are not that much hell a decent tool box is 4k

__________________
SOME PEOPLE ARE LIKE SLINKIES. NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.

double0Si

Well I'm ending up selling it. Bills are piling up, especially for rental cars. Someone offered me 4800 cash for spare engine and all. Pretty much barely breaking even but I'm not going to go into debt just to keep the car. Maybe I'll look for a nice EG hatch.

HATCHET_HONDA

you couldnt find anywhere at all to swap engines over??? it should be easy since your puttin a b16 right back in it.. did you get a price quote from anyone?

__________________
admit it..your a ricer....

90 si hatch jdm d15b swap(done)
91 dx hatch b16 swap (in progress)

b16a block
95 gsr p&p head
skunk 2 valvetrain
stage 1 cams
type r bottom end
tri y header
stage 3 act clutch ftw

double0Si

Yea, OneSix quoted 575 plus parts which I know isnt bad but as I said bills keep coming u. mostly high because of all the activation fees Im gettin with just moving here. I get paid bi-weekly which blows. And rentals are 150 a week. im not looking for a handout but if anyone could help thats in the area or knows someone whos good and cheap Ill let them take the old engine AND throw them some cash. I just need it done ASAP. You can check out my old posts to see whats up with the old one. If all else fails Ill have to cut the losses and get a different car. I live in Warrenville right off 88. Ive got no tools with me as I always used my dads stocked garage back in Columbus. ANYONE? ANYTHING? Id greatly appreciate it. Id really rather not sell the car especially for a loss. but if need be any takers?

97hatch

pm sent

__________________
SOME PEOPLE ARE LIKE SLINKIES. NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.

efhondakid

Watch it, I venture to Canton all the time, its not that bad.

OP what swap are you doing?

__________________
^ (dont listen)
Dont PM me with tech questions. I will not answer them.
There is a hidden message here.
"Motor swaps, turbo kit installs, diagnostics, minor repairs, minor fab and bodywork. Located in Akron-Canton area PM me for more details."

"In the dice game of life who gets the last roll?"

double0Si

all in doing is replacing a currently non running completely stock B16A2 with another completely stock but currently OBD1 B16A2. simple enough but impossible without tools or Honda smarts (yes im a born and raised chevy guy.)

efhondakid

Even with Chevy smarts and some basic tools you could do that swap. There really isnt much to it, pull the old one, replace OBDI parts with the OBDII parts, and replace. Your gooing to pay a lot for a shop to do that. To bad you moved from Ohio, I d do it for you.

__________________
^ (dont listen)
Dont PM me with tech questions. I will not answer them.
There is a hidden message here.
"Motor swaps, turbo kit installs, diagnostics, minor repairs, minor fab and bodywork. Located in Akron-Canton area PM me for more details."

"In the dice game of life who gets the last roll?"

double0Si

Yea, well I've got my hands, a Phillips and flathead, side cutters, needlenoses, and a hammer. Those are pretty simple lol. Ill just beat on it with the hammer until it breaks free. Yea, I wish it was in Ohio too. It still would be (well probably not because itd be done and back) if a friend of a friend who had a B18C1 and swapability(?) didnt screw me over.