accordmaui

The problem is on the H23 it uses a seperate ignition coil whereas the f22 uses the integrated IC and all the h23 plugs do not plug right up to the accord body harness so we are having trouble and was wondering what poeple on here with that swap used for a wiring harness and what mods were needed to the wiring.

90AccordH22

Just get the OBD 1 Harness it'll be way easier switches right over 30 bucks on Ebay(if using prelude ECU) Good Luck!

__________________
1990 Civic Si (Waiting for B16A)
1990 Accord Ex coupe H22a R.I.P.

vuaccordla

90accordh22,

When you mean wire harness from ob1. Do you mean the wiring harness from the 92-93 accord that has the external coil. because 90-91 accords have internal coil.

tab

You could do that. You have to lengthen a few wires, but it's not that bad. Plus, you'd have to run the knock sensor wire to the ecu. My 92 LX has external, and my H22A I put in was internal. You might also be able to change your distributor if that is the only problem you are having(or run a new hot wire to the coil that turns on with the key). The 92-93 accord harness would probably be cheapest...

__________________
--------------------
--------------------

2003 Chevy Avalanche
Leather, Moonroof, Z71, tow package, bose+six disc, nice.

1992 Accord EX (sold to good friends)
JDM H22A
H22A Auto Tranny w/LSD
I/H/E -- All stainless w/2.5 inch Catback

1968 Oldsmobile Toronado
Project car, 455 ci front wheel drive, nasty.