safiro21

Hello!
I have:
Acura integra 90 ls (No tranny)
Have a complete motor with harness, computer and hole motor.
I have a civic dx hatch 88 running
project:
Put the b18 dohc non-vtec in the hatch
Questions:
Tranny is the same or change what tranny i need use?
Future problems?
Like shaft for tranny change?
what shaft i need use dx or integra?
The shifter change?
thx for help!!!

kidkg24

OK so you need to get a ED/Ef B series mount set. Hasport best, but ebay ones will work. For the shift rods you can cut the civic, and integra ones, and put them together custom. Personally I would just save yourself the headacke, and but some. They are only $140-$150. To keep is simple use the Obd 0 ecu pm6(si) or the Pr4 the pinouts are the same as si, or crx for both the ecus. Axles, and intermediate shaft, transmission need to be from a integra (cable tranny). If you use the Obd 0 ecu use the Obd 0 dist. from a 1990-1991 integra. or you can rewire or buy a harness from hasport,rywire,ect. Also nextime search this stuff a lil bit, cos all the questions you asked are all over this site, and asked allmost every day.

integralove

you can use any b series tranny, i recommend the b16 tranny