b16eg

i have a b16a3 in my 95civic. i need some wiring help. DO ANYBODY HAVE PICUTRES OF WHERE THE 6 WIRE FOR VTEC GOES. I KNOW WHERE IT GOES ON THE ECU but not on motor. I HAVE THE KNOCK, VTEC Solenoid,VTEC Oil Pressure Sensor, AND VTEC Ground. I NOT SURE HOW THE CHECK WHERE Evap Purge Power. AND Evap Purge Solenoid was not in the a20 pin not even hooked up. when i drive my car with a stock p28, i can hear the vtec at 4500. but when i put in a p30, it seem like it cant pass 5000rpm and cant hear or feel no vtec. can any1 help so i can have vtec on the p30????????????????

darwins_vtech

there is a pinout list for the ecu on hybridgarage.com under the tech library.

darin

b16eg

well, my question is that if i dont plug up the Evap Purge Power AND Evap Purge Solenoid , will i have vtec????? and where is that located on the b16 motor

pissedoffsol

fuck hybrid garage. you are here.

http://www.hondaswap.com/swap/viewer.php?id=57

92b16vx

Evap has nothing to do with vtec. What model civic do you have? Niether does the o2, but here is how if it is a VX, and the same theory applies for other models, just without repinning the one wire.

__________________
95 CX|B16A2

b16eg

92b16vx, what are you talking about?? can you clear things up. i have a 95 civic. can you please HElP. thanks for all the reply

JDMilan

YOu getting any CEL's??? with the P30



Milan

__________________
<span style=\"color:red\">&quot;92 Blue EG&quot;</span>
-Project 3 - Motor A (NA stock SiR longblock B16 EG/S1tran)
14.3@97 15&quot; radial tires &amp; Gutted
-Project 3 - Motor B (NA stock SiRII longblock B16 EG/S4tran)
13.3@103 MT's &amp; Gutted
<span style=\"color:red\">&quot;Goldy S13&quot;</span>
-Project 4 - Motor A (FI SR20DET w/T28 &quot;Under Construction&quot
<span style=\"color:red\">&quot;Silver E46&quot;</span>
-Project 5 - Motor A (???)

92b16vx

Oops, forgot the link HERE is the link, but this is for the o2 and it is VX specific, but the principle is the same, just don't move the 12v. Also there is a link to a pinout that can help you. but beware sometimes wires change colors at the canon plugs so make sure to trace them by finding the color on the motor side of the harness) and then matching it to the ECU side then finding it in the ECU plug. Of course we still have no idea what model you have Si, VX, CX, DX, etc... that info is helpful, because then we can diagnose knowing what needs to be done for that model. Does the motor rev fully with the P28? If so your P30 may be bad.

__________________
95 CX|B16A2