hatemycivic

hey whats goin on i know this is prolly posted somewhere else and i looked and only found a few threads but not exact info i was lookin for. i just swapped in my b16 and its up and running i just need to pin out the plugs on the other civic i took the motor out of i think its a 93 dx hatch. so the vtec and knock senor was allready ran once. so i just need to pin out the plugs on the other civic i tried paper clips and everything else and the wire doesnt wanna come loose. any ideas would be greatly appreaciated.

Dark93DX

Have you tried needle nose pliers?


You could alos try a local electronic tools supplier, they would prob have any special tools you might need.

__________________
K20Z3 EG - Installed, waiting for Kpro
LSD w/ 4.764 FD

B18A CRX

hatemycivic

nah i havent but thier a lil too big for the connector

92b16vx

I use a small jewlers screwdriver, like the ones you can buy at Walgreens or CVS, there's a little tab you push in the screw driver to lift it and the wire pulls out.

How to wire vtec

There's a zip file with the pics at the bottom of the first post.

__________________
95 CX|B16A2

XBL | binary xj0hnx | Halo 3