Hondaswap.com | Honda Technical & JDM styling Forums

fierceEG6 · 08-10-2006, 09:05 AM

Hi everyone

I have a B18c which i recently purchased and it came with a cable transmission. I purchased a GSR hydraulic tranny since my car uses a hydraulic tranny. The problem is cant get the tranny into the motor! We have tried several several times and it just wont go in.

Is the clutch different for cable and hydraulic trannys? ie clutch disc, pressure plate and fly wheel? do i need to change them all as well?

Any help would be appreciated. thank you

y2kcivic · 08-12-2006, 07:45 PM

check the splines on yur clutch disc , they may not match up... different years may mean different spline count !

hoss95chev · 08-12-2006, 09:05 PM

90-91 trans was smaller splines than 92 up

qtmac_mien · 08-13-2006, 12:18 AM

ya if it came with a cable tranny then u might want to get a clutch for a hydro then it should fit

fierceEG6 · 08-13-2006, 10:11 AM

thanks everyone...engine is finally in the car..haha now the only problem is the wiring!!!

never again will i buy a swap that came out of a crx!

08-10-2006, 09:05 AM	#1
fierceEG6 Junior Member Join Date: Jul 2006 Age: 26 Posts: 11 iTrader: 0 / 0% Rep Power: 7	tranny install problems on GSR motor Hi everyone I have a B18c which i recently purchased and it came with a cable transmission. I purchased a GSR hydraulic tranny since my car uses a hydraulic tranny. The problem is cant get the tranny into the motor! We have tried several several times and it just wont go in. Is the clutch different for cable and hydraulic trannys? ie clutch disc, pressure plate and fly wheel? do i need to change them all as well? Any help would be appreciated. thank you

08-12-2006, 09:05 PM	#3
hoss95chev Junior Member Join Date: Aug 2004 Age: 29 Posts: 2 iTrader: 0 / 0% Rep Power: 0	gsr trans won't go on engine 90-91 trans was smaller splines than 92 up

08-13-2006, 12:18 AM	#4
qtmac_mien Senior Member Join Date: Dec 2003 Posts: 290 iTrader: 0 / 0% Rep Power: 0	ya if it came with a cable tranny then u might want to get a clutch for a hydro then it should fit __________________ AIM: shrtxqtxmienxboi email: qtmac_mien@hotmail.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ported ls motor and 5 speed cable tranny	electric_rex	Parts: For Sale/Trade/Wanted	4	10-10-2006 11:26 PM
B18C motor B16A tranny	PolkMomoInMYSi	Engine Building	5	04-28-2005 10:22 PM
H22A in a 3rd gen (DB/DC) Integra	pissedoffsol	Swap Articles	0	01-12-2004 02:17 AM
d15b2 motor, tranny, ecu, axles...etc	b18c5rx	Parts: For Sale/Trade/Wanted	3	12-22-2003 04:09 PM
LS-VTEC/CR- VTEC Info	pissedoffsol	General Tech Articles	1	11-10-2002 04:19 AM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

08-12-2006, 07:45 PM	#2
y2kcivic y2kcivic Join Date: Jul 2006 Location: moncton new Brunswick canada ( eastern canada ) Age: 31 Posts: 4 iTrader: 0 / 0% Ride: 2000 civic ek hatch black in color Rep Power: 0	check the splines on yur clutch disc , they may not match up... different years may mean different spline count !

08-13-2006, 10:11 AM	#5
fierceEG6 Junior Member Join Date: Jul 2006 Age: 26 Posts: 11 iTrader: 0 / 0% Rep Power: 7	thanks everyone...engine is finally in the car..haha now the only problem is the wiring!!! never again will i buy a swap that came out of a crx!

Hondaswap.com | Honda Technical & JDM styling Forums

tranny install problems on GSR motor