Hondaswap.com | Honda Technical & JDM styling Forums

civichatch33 · 04-28-2003, 04:08 PM

Where can I buy a B17A1 Integra engine and can I use the Integra GS Tranny or are they the same with both integra engines, meaning the b17A1 and the b18A1? Thanks a lot.

92b16vx · 04-28-2003, 04:28 PM

B17A1 is really hard to find,since it was only around for a couple years.You can TRY to find one at a online dealer,but you'll have just as good of luck tracking one done in junkyards.Try www.importautosalvage.com,they have USDM motors and may be able to find one.

lsvtec · 04-28-2003, 04:44 PM

You can use the GS tranny, but the gear ratios suck. You are going to pay more for that particular engine because it is rare than it is really worth. You would be better off getting a B18C1 especially if you are planning on reusing your tranny.

BoneStock · 04-28-2003, 05:08 PM

www.jdmpower.net

92b16vx · 04-28-2003, 05:20 PM

Quote:

Originally posted by BoneStock@Apr 28 2003, 10:13 PM
www.jdmpower.net

Refer to this thread before going there.

civichatch33 · 04-28-2003, 05:54 PM

Thanks, so do you think I should just rebuild my B18A1 or buy a B16A1? The only reason I don't want to buy a B16 is b/c I can't seem to find any perfomance bolt-ons b/c I don't know what to look for. I know most of the parts are Del Sol and Integra, or at least that's what I heard but I have no clue. I've seen parts like head gaskets and stuff but what I want to know is what I/H/E and stuff like that. Please help if you can.

92b16vx · 04-28-2003, 06:19 PM

For aftermarket parts you need to buy parts for a 94-97 Delsol DOHC vtec (B16A3),or a 99-00 Si.

But really the descision on what to get is up to you.The B16A is about as supported as a small block chevy,there is NO shortage of aftermarket for it.

civichatch33 · 04-28-2003, 06:41 PM

k thanks. Should I use my LS tranny (YS1) or go with a Y1 tranny?

92b16vx · 04-28-2003, 06:47 PM

Quote:

Originally posted by civichatch33@Apr 28 2003, 11:46 PM
k thanks. Should I use my LS tranny (YS1) or go with a Y1 tranny?

I'd get the B17's,or cable B16's over the LS.

civichatch33 · 04-28-2003, 06:53 PM

K thanks.

civichatch33 · 04-28-2003, 07:07 PM

Anyone know if www.osakajdmmotors.com is a good place to buy an engine. I've noticed on their website they seem to have the cheapest prices for all JDM motors compared to the other websites I've looked at.

theWall · 04-28-2003, 07:26 PM

hey there,

i have a b17a1 that i will let go give me a price and it is yours. all you need is drive shafts, wireing harrness, ecu, and disrubutor.

92b16vx · 04-28-2003, 07:51 PM

Quote:

Originally posted by civichatch33+Apr 29 2003, 12:12 AM--><div class='quotetop'>QUOTE(civichatch33 @ Apr 29 2003, 12:12 AM)</div><div class='quotemain'> Anyone know if www.osakajdmmotors.com is a good place to buy an engine. I've noticed on their website they seem to have the cheapest prices for all JDM motors compared to the other websites I've looked at. [/b]

Osucka sucks donkey balls.Do a search for them and you'll get a book of stories of them burning people.

<!--QuoteBegin-theWall Posted on Apr 29 2003@ 12:31 AM
have a b17a1 that i will let go give me a price and it is yours. [/quote]
Send him a PM or an Email,it works better.

BoneStock · 04-28-2003, 10:17 PM

Quote:

Originally posted by 92b16vx+Apr 28 2003, 04:25 PM--><div class='quotetop'>QUOTE(92b16vx @ Apr 28 2003, 04:25 PM)</div><div class='quotemain'> <!--QuoteBegin-BoneStock@Apr 28 2003, 10:13 PM
www.jdmpower.net

Refer to this thread before going there. [/b][/quote]

http://www.honda-tech.com/zerothread?id=457500

92b16vx · 04-28-2003, 10:29 PM

Quote:

Originally posted by BoneStock+Apr 29 2003, 03:22 AM--><div class='quotetop'>QUOTE(BoneStock @ Apr 29 2003, 03:22 AM)</div><div class='quotemain'>

Quote:

Originally posted by 92b16vx@Apr 28 2003, 04:25 PM
<!--QuoteBegin-BoneStock

Quote:

@Apr 28 2003, 10:13 PM
www.jdmpower.net

Refer to this thread before going there.

http://www.honda-tech.com/zerothread?id=457500 [/b][/quote]

Good stuff,and I'm always lecturing about isolated incidents

onetyme_sam · 04-28-2003, 11:11 PM

hey buddy, your in luck there is 1 for sale complete

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33615

92b16vx · 04-28-2003, 11:16 PM

Hahahaha,good pics for the ad...

BoneStock · 04-29-2003, 01:44 AM

Quote:

Originally posted by 92b16vx@Apr 28 2003, 10:21 PM
Hahahaha,good pics for the ad...

Lmao....Good stuff...

JDMPowersales · 04-30-2003, 10:29 AM

<---JDMPowersales....The axles were missing and i was on vacation. That guys motor is very clean. On Honda-Tech as you can tell from my vouch thread I carry clean engines. I also have a b17a which is complete! because its from a salvaged car. If you would like I am willing to go down to the junk yard and take a picture of it. A buddyof mines has a USDM Junk Yard and we exchange parts every now and then. Pictures are below. That motor has a blurry vin number kind of shady.

http://www.we-todd-did-racing.com/wetoddim...DMxeTU0MQ%3D%3D

04-28-2003, 04:28 PM	#2
92b16vx B happy Join Date: Nov 2002 Location: Location: Location: Location: Age: 38 Posts: 13,020 iTrader: 1 / 100% Ride: dohc 95 egg Rep Power: 186	B17A1 is really hard to find,since it was only around for a couple years.You can TRY to find one at a online dealer,but you'll have just as good of luck tracking one done in junkyards.Try www.importautosalvage.com,they have USDM motors and may be able to find one. __________________ 95 CX\|B16A2 XBL \| binary xj0hnx \| Halo 3

04-28-2003, 04:44 PM	#3
lsvtec GNU/Linux Evangelist Join Date: Sep 2002 Location: Greater Portland, OR Posts: 5,497 iTrader: 0 / 0% Ride: The Cheapest Road Bicycle I could get Rep Power: 69	You can use the GS tranny, but the gear ratios suck. You are going to pay more for that particular engine because it is rare than it is really worth. You would be better off getting a B18C1 especially if you are planning on reusing your tranny. __________________ v3sw7+9Chw6ln3pr7Ock4ma9w3TXm3l7GDF i7Ce6+8t4MNb8Oen6g6RAOa26s5MRp6 hackerkey.com

04-28-2003, 06:19 PM	#7
92b16vx B happy Join Date: Nov 2002 Location: Location: Location: Location: Age: 38 Posts: 13,020 iTrader: 1 / 100% Ride: dohc 95 egg Rep Power: 186	For aftermarket parts you need to buy parts for a 94-97 Delsol DOHC vtec (B16A3),or a 99-00 Si. But really the descision on what to get is up to you.The B16A is about as supported as a small block chevy,there is NO shortage of aftermarket for it. __________________ 95 CX\|B16A2 XBL \| binary xj0hnx \| Halo 3

04-28-2003, 11:11 PM	#16
onetyme_sam Senior Member Join Date: Mar 2003 Location: midwest Posts: 129 iTrader: 0 / 0% Rep Power: 15	hey buddy, your in luck there is 1 for sale complete http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33615 __________________ You smell that?

04-28-2003, 11:16 PM	#17
92b16vx B happy Join Date: Nov 2002 Location: Location: Location: Location: Age: 38 Posts: 13,020 iTrader: 1 / 100% Ride: dohc 95 egg Rep Power: 186	Hahahaha,good pics for the ad... __________________ 95 CX\|B16A2 XBL \| binary xj0hnx \| Halo 3


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

04-28-2003, 04:08 PM	#1
civichatch33 Junior Member Join Date: Apr 2003 Posts: 16 iTrader: 0 / 0% Rep Power: 14	Where can I buy a B17A1 Integra engine and can I use the Integra GS Tranny or are they the same with both integra engines, meaning the b17A1 and the b18A1? Thanks a lot.

04-28-2003, 05:08 PM	#4
BoneStock Junior Member Join Date: Apr 2003 Posts: 27 iTrader: 0 / 0% Rep Power: 14	www.jdmpower.net

04-28-2003, 05:54 PM	#6
civichatch33 Junior Member Join Date: Apr 2003 Posts: 16 iTrader: 0 / 0% Rep Power: 14	Thanks, so do you think I should just rebuild my B18A1 or buy a B16A1? The only reason I don't want to buy a B16 is b/c I can't seem to find any perfomance bolt-ons b/c I don't know what to look for. I know most of the parts are Del Sol and Integra, or at least that's what I heard but I have no clue. I've seen parts like head gaskets and stuff but what I want to know is what I/H/E and stuff like that. Please help if you can.

04-28-2003, 06:41 PM	#8
civichatch33 Junior Member Join Date: Apr 2003 Posts: 16 iTrader: 0 / 0% Rep Power: 14	k thanks. Should I use my LS tranny (YS1) or go with a Y1 tranny?

04-28-2003, 06:53 PM	#10
civichatch33 Junior Member Join Date: Apr 2003 Posts: 16 iTrader: 0 / 0% Rep Power: 14	K thanks.

04-28-2003, 07:07 PM	#11
civichatch33 Junior Member Join Date: Apr 2003 Posts: 16 iTrader: 0 / 0% Rep Power: 14	Anyone know if www.osakajdmmotors.com is a good place to buy an engine. I've noticed on their website they seem to have the cheapest prices for all JDM motors compared to the other websites I've looked at.

04-28-2003, 07:26 PM	#12
theWall Junior Member Join Date: Apr 2003 Posts: 6 iTrader: 0 / 0% Rep Power: 0	hey there, i have a b17a1 that i will let go give me a price and it is yours. all you need is drive shafts, wireing harrness, ecu, and disrubutor.

04-30-2003, 10:29 AM	#19
JDMPowersales Member Join Date: Mar 2003 Posts: 73 iTrader: 0 / 0% Rep Power: 14	<---JDMPowersales....The axles were missing and i was on vacation. That guys motor is very clean. On Honda-Tech as you can tell from my vouch thread I carry clean engines. I also have a b17a which is complete! because its from a salvaged car. If you would like I am willing to go down to the junk yard and take a picture of it. A buddyof mines has a USDM Junk Yard and we exchange parts every now and then. Pictures are below. That motor has a blurry vin number kind of shady. http://www.we-todd-did-racing.com/wetoddim...DMxeTU0MQ%3D%3D __________________ <span style=\'color:green\'><span style=\'font-family:Optima\'>OBD1 and OBD2 ZC motors 700.00 USD F20B 2850.00 F22B 500.00 ZC 550 OBD0 , OBD1&2 700.00 B16a Hydro 2199.95 Auto 1550.00 B16a Cable 1299.95 Auto 999.95 H22a Auto 1550 Manual 2099.95 shipping 250-350</span></span> Dont use the "my wife cant drive stick excuse on me" I understand :P

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
93 B17A1 TRANNY FOR TRADE	B17CRX	Parts: For Sale/Trade/Wanted	1	05-20-2004 07:21 PM
Turbocharging Stock b17a1	El Nagro	HYBRID -> ED-EF / DA	4	02-27-2004 07:06 PM
gsr b17a1	hatched92	Engine Building	4	10-08-2003 12:36 AM
B17a1?	civicspeed	HYBRID -> ED-EF / DA	13	06-15-2003 12:07 PM
B16a Jdm Or B17a1 Usdm Into 92-93 Integra	iamgold1	HYBRID -> EG-EK / DC	5	01-05-2003 07:57 PM

Hondaswap.com | Honda Technical & JDM styling Forums

Where Can I Buy A B17a1?