Hondaswap.com | Honda Technical & JDM styling Forums

Accordian · 09-09-2006, 10:26 PM

94 integra rs 2dr 5spd
I just got this car two days ago, when I bought it I was told it needed a new Throwout bearing and whenever the clutch pedal was engaged (out) it would make a loud spinning metal noise. today I drove it like 1/4 of a mile down my road and after being in third gear for about 3 seconds..there was a huge crack sound and the car stalled. I looked and saw that my driver's side axle had snapped??! and NOW when you try and let the clutch out in neutral, the drivers side axle spins and no power goes to passenger and when you let it out in any actual gear the car doesn't budge...just stalls (acting like the transmission is totaly stuck.) what is going on... what i'm thinking is it didn't need a new throwout bearing, it needed transmission fluid. I haven't got a chance to check it, but I think it has been running dry and finally seized the tranny.

Accordian · 09-10-2006, 06:48 PM

anyone? Is it seized, or locked up? can I un-seize it if it is?

Accordian · 09-15-2006, 11:10 PM

lsvtec · 09-16-2006, 02:20 AM

If you have done permanent damage then it won't work anymore. If you haven't then add some oil and it will be fine. There really isn't anyway for us to diagnose it this way.

Accordian · 09-16-2006, 02:58 AM

ahh I see, well it did break my axle so i'm guessing it got locked up pretty bad inside. Hopefully not, I will first check the oil level then add some heavy weight oil. I was thinking of then trying to free up the transmission, would over filling it be ok? as long as I don't drive it?

MikeBergy · 09-20-2006, 07:48 AM

So....you snapped an axle, and then tried to drive it?
Your first problem - If you snap an axle, the open differential is going to keep the transmission from from transferring any power to the nonbroken axle. I don't see any throwout bearing related symptoms from your description.

integraracer157 · 09-28-2006, 05:55 PM

pull the tranny replace the clutch and throwout bearing and pilot bearing, while the tranny is out see if you can shift thru a gear. if the throwout bearing siezed and broke a piece prolly went into the clutch, its like driving a bike fast then sticking a stick in the front tire. its going to lock and throw you off. should be fine, if your in so cal let me know im always glade to throw in a hand. got any tool needed.

Accordian · 09-28-2006, 08:51 PM

wow man, thanks for the help, I hope thats what happened instead of the tranny messing up. Unfortunately i'm in Vermont (not exactly filled with knowlegable tuners) thanks for the offer, wish I was in a honda friendly state. -Ian

FlyBMXer4130 · 10-24-2006, 12:05 AM

heh... are you sure it was the axle that snapped and not the CV axle?? Those tend to go out on Integras @ 100k+

MikeBergy · 11-06-2006, 12:47 PM

I've never heard of intermediate shaft failure as being a common problem on integras. Mine's still going strong @ 250k

Accordian · 11-07-2006, 01:27 PM

The intermediate shaft didn't fail, The transmission seized becasue it was run w/o fluid and as it seized, the foreward motion of the car snapped the driver's side axle. I put ina new tranny and axles and everything works great.

integraracer157 · 11-08-2006, 01:53 PM

coo glade to hear you got it all straight, so did you go with the b16 tranny, that tranny is friggin awsome

MikeBergy · 11-10-2006, 04:35 PM

Quote:

Originally Posted by Accordian

The intermediate shaft didn't fail, The transmission seized becasue it was run w/o fluid and as it seized, the foreward motion of the car snapped the driver's side axle. I put ina new tranny and axles and everything works great.

That sucks. Glad you replaced it though.

09-09-2006, 10:26 PM	#1
Accordian Junior Member Join Date: Aug 2006 Age: 19 Posts: 86 iTrader: 0 / 0% Ride: 94 Accord EX Rep Power: 7	i think i really messed something up, tell me i'm wrong please 94 integra rs 2dr 5spd I just got this car two days ago, when I bought it I was told it needed a new Throwout bearing and whenever the clutch pedal was engaged (out) it would make a loud spinning metal noise. today I drove it like 1/4 of a mile down my road and after being in third gear for about 3 seconds..there was a huge crack sound and the car stalled. I looked and saw that my driver's side axle had snapped??! and NOW when you try and let the clutch out in neutral, the drivers side axle spins and no power goes to passenger and when you let it out in any actual gear the car doesn't budge...just stalls (acting like the transmission is totaly stuck.) what is going on... what i'm thinking is it didn't need a new throwout bearing, it needed transmission fluid. I haven't got a chance to check it, but I think it has been running dry and finally seized the tranny. Last edited by Accordian; 09-09-2006 at 10:55 PM.

09-15-2006, 11:10 PM	#3
Accordian Junior Member Join Date: Aug 2006 Age: 19 Posts: 86 iTrader: 0 / 0% Ride: 94 Accord EX Rep Power: 7	bump

09-16-2006, 02:20 AM	#4
lsvtec GNU/Linux Evangelist Join Date: Sep 2002 Location: Greater Portland, OR Posts: 5,497 iTrader: 0 / 0% Ride: The Cheapest Road Bicycle I could get Rep Power: 69	If you have done permanent damage then it won't work anymore. If you haven't then add some oil and it will be fine. There really isn't anyway for us to diagnose it this way. __________________ v3sw7+9Chw6ln3pr7Ock4ma9w3TXm3l7GDF i7Ce6+8t4MNb8Oen6g6RAOa26s5MRp6 hackerkey.com

09-28-2006, 08:51 PM	#8
Accordian Junior Member Join Date: Aug 2006 Age: 19 Posts: 86 iTrader: 0 / 0% Ride: 94 Accord EX Rep Power: 7	wow man, thanks for the help, I hope thats what happened instead of the tranny messing up. Unfortunately i'm in Vermont (not exactly filled with knowlegable tuners) thanks for the offer, wish I was in a honda friendly state. -Ian __________________ My 94 CD5

11-07-2006, 01:27 PM	#11
Accordian Junior Member Join Date: Aug 2006 Age: 19 Posts: 86 iTrader: 0 / 0% Ride: 94 Accord EX Rep Power: 7	The intermediate shaft didn't fail, The transmission seized becasue it was run w/o fluid and as it seized, the foreward motion of the car snapped the driver's side axle. I put ina new tranny and axles and everything works great. __________________ My 94 CD5


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

09-10-2006, 06:48 PM	#2
Accordian Junior Member Join Date: Aug 2006 Age: 19 Posts: 86 iTrader: 0 / 0% Ride: 94 Accord EX Rep Power: 7	anyone? Is it seized, or locked up? can I un-seize it if it is?

09-16-2006, 02:58 AM	#5
Accordian Junior Member Join Date: Aug 2006 Age: 19 Posts: 86 iTrader: 0 / 0% Ride: 94 Accord EX Rep Power: 7	ahh I see, well it did break my axle so i'm guessing it got locked up pretty bad inside. Hopefully not, I will first check the oil level then add some heavy weight oil. I was thinking of then trying to free up the transmission, would over filling it be ok? as long as I don't drive it?

09-28-2006, 05:55 PM	#7
integraracer157 Junior Member Join Date: Dec 2005 Posts: 21 iTrader: 0 / 0% Rep Power: 8	pull the tranny replace the clutch and throwout bearing and pilot bearing, while the tranny is out see if you can shift thru a gear. if the throwout bearing siezed and broke a piece prolly went into the clutch, its like driving a bike fast then sticking a stick in the front tire. its going to lock and throw you off. should be fine, if your in so cal let me know im always glade to throw in a hand. got any tool needed.

10-24-2006, 12:05 AM	#9
FlyBMXer4130 Sh1tAssIntegras Join Date: Oct 2006 Location: New Orleans "little mexico" Age: 22 Posts: 4 iTrader: 0 / 0% Ride: '91 Integra GS x 2, '93 Integra GS, '96 Integra GS-R, '93 Eclipse RS Rep Power: 0	heh... are you sure it was the axle that snapped and not the CV axle?? Those tend to go out on Integras @ 100k+

11-08-2006, 01:53 PM	#12
integraracer157 Junior Member Join Date: Dec 2005 Posts: 21 iTrader: 0 / 0% Rep Power: 8	coo glade to hear you got it all straight, so did you go with the b16 tranny, that tranny is friggin awsome

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A damn good read....	Airjockie	Members' Lounge	4	06-17-2006 10:31 PM
damn women drivers :(	pissedoffsol	Members' Lounge	38	04-29-2005 09:19 PM
I'm too DAMN TALL!!!	One Stop Customs	Members' Lounge	39	01-25-2005 10:26 AM
another damn strut bar question	BodyDroppedNikes	Wheels / Suspension / Tires / Brakes	10	04-15-2004 01:32 AM
Damn it!!!!! Damn it !!!! DAMN it	Airjockie	Engine Building	8	10-21-2003 02:09 AM

Hondaswap.com | Honda Technical & JDM styling Forums

damn, i think i really messed something up