Recent content by caboose

Also when you are hitting it with heat, Heat the head of the bolt, this will cause the bolt to get longer and have less friction against the pulley. Be sure to add oil to the gun, the less friction in the gun the more torque it will produce. And be sure the gun is set at the max torque setting.

I'm gonna assume that you are spinning the bolt the right way ;). Lefty loosie, haha. A high torque 1/2 impact should be able to get it off no problem. The one I use is earthquake brand and is only $90-$100 and is sold by harbor freight. Let the air compressor get up to max (120-130psi) and...

I have a MOMO Corse steering wheel that was off of my 1989 Honda CRX HF. The steering wheel is in pretty good shape. There are a couple of scratches in the left spoke and a blemish in the leather in the 3 and 6 position. There are a couple of scratches in the horn center as well. From what I...

for the time it would take, it's probably just easier to scrap it as is. You do get more for pure aluminum, but you can't have any other metals in it.

Is they guy that keeps breaking axles running increased camber?

Sorry, I forgot to tell you that it was a quote from Andy on the office.

It sounds like your brakes aren't square to your hubs. I can think of only two things that could cause this. It is possible that your brakes rotors are defective and the brake surface isn't parallel to the hub surface or parallel to each other. Another possibility is that something is caught...

start your own thread please

also, when checking to see if a spark plug is good, you need to unscrew it out of the head. Here's a basic diagram to diagnose your sparkplugs.

I wouldn't rule the starter out yet. Those starters are known for going out too. When mine went it died a slow death... so you might find that it will only work sometimes until eventually it won't start at all.

Who says 3" is 'too big?' (K20 Dyno) - Honda-Tech

You meet a lot of ladies driving an Xterra because you pull up to a stoplight and look over and there's an Xterra next to you, they're always driven by chicks. So there's your ice breaker.

I'm sorry, but everyone that I have know that has had a wheel bearing go out has had plenty of warning before their wheel broke off. That's your own damn fault.

Wanted to show of some pics of my new bike. This the first bike that I have owned. It's a 01 CR250. It has vForce reeds, Pro circuit pipe and spark arrester, one industries seat and fender, excel rims, renthal chain and sprocket, and twin air filter. It also came with a sand pro paddle and a...

imo you should keep stock dash and interior if you want intend on this thing being a street car