Recent content by cj_89

it is very simple to adjust the cable.But at the same time it is very finiky!! My father is having trouble with his.

all i did was get a manual mount off another body drill out the spot welds on both and it just falls off It was quite simple with the gearbox out.Its good to run a bead on the outsides around the mount if you look to lay down some power.Im not drill a few of your own holes in the mount and get...

Civic EG :: View topic - DIY: oem door panel pocket you can see the cutout there for his which makes it easier,but i have nothing to go by.It sucks,also guys my door panel is black but the door pockets are grey,what do you recommend to paint them with.I was also thinking on wrapping them in...

Do you know the site off hand,and i have no idea where to cut,the factory "knockout"/"cutout" is not there on this model door panel :(

To be completly honest it all depends how bad you want the car and what are your plans? Heres a link to ROTT is you want to see the end result Google Image Result for http://www.honda-tech.com/picture.php?albumid=9748&pictureid=13625 if you have the knowlege,or know a buddy who does i say go...

so i have a 94 civic coupe plain jane dx.I have installed all leather door panel,but my question is i want to put si/ex door pockets in the car,along with tweeters. So i got a set of si door panels off my buddy,went to chop out mine to put them in,and i guess where they are the all leather door...

triple check your thermostat housing ground.This is notorious for trouble!!

crazy! should be a billion more like ya.Fall off the horse get back on it again.get er done.

I don't mean to jack your thread.But maybe we have similar problems.I have reason to believe the thermostat is gone in my car,but..... Ok when the car is at operating temp,and stopped it goes up less than half on the temp hand which is normal.But when the car start driving along the temp hand...

hmm.My two solutions were clobber/and the right way and you say no to both?:confused: I must have read it wrong.I was thiking how else can you do it bsides drilling and welding..

lmao!!!!

so your saying you can get a z6 vtec sedan factory??? in the states?. If so i want out of canada,and down there !! lol

This is turning into a FAQ. I dunno if this is directed to me.But you can get se sedans and coupes in canada.92-95 models.The special edition coupe came with a clock,tilt,pass side mirror in sunvisor,and im not 100% sure but i "think" a tach.As for the sedan i know you can get them se,but im...

eg6sir you da man!!You know your stuff. Soo your car came with a factory b7 auto non-vtec, and you swapped for a z6(good choice btw i hate y7/y8's) and ran the vtec.Its pretty easy to configure.The donor z6 car was a stick and he gave you the manual ecu.Try your factory ecu and see wll that...

umm where did you get the "rear trailing arm spehericals" too NEVER seen those before.Are they good? Expensive?