Recent content by [Freemantle]

Great info and a nice website link too. I'm going to operate under the assumtion that the guy in Miami has a regular-ol D16 manifold on there. I went down to see it and I must say... it drives/looks like shit :mrgreen:.

That's subjective to the installer. $1200 can afford you a good turbo, manifold, wastegate, intercooler, and fuel pump. He can make a safe setup with the VAFC hack (though not nearly as fast as a true tune would be). Supplying he did his own exhaust and charge piping, the rest of the parts could...

How are your 60' times? What engine are you using?

Is your compressor housing 1 or 2 pieces?

That's some awesome info. So what I saw on H-T about ZC ports being offset from D16 ports is misinformation? This is really useful stuff guys, thanks a lot. I honestly still have a few options in front of me. That DOHC ZC turbo, a B16 swap minus the B16 and wheels, an LS swap complete (with...

I know, I've never used the ostrich. I have used Uber Datalogging on an OBDI B16-T, and it was fantastically easier than having my GF in the passenger seat writing down the AFRs on a steno notebook when I said "now". :)

Awesome. I've got no problem running Turboedit, i just didn't know if it felt very... shareware like the early bug-laden versions of Uberdata did. Thanks for the Wiki link. Sometimes that site isn't terribly easy to navigate. (RTFW!) Any manifold suggestions? Edit: wow! looks much more...

There is a 1990 CRX Si with a DOHC ZC swap for sale in Miami that I am thinking about picking up. The current owner has the manifold and turbo from the D16 Greddy Kit installed and running on this car. He claims "it bolts right up, no modification" but from what I have read, the ports are...

Damn BlueShadow, you have way more patience than I. You really don't need an ostrich, thaough I'm sure it would be useful. I did my first full blown Uberdata tune without datalogging (this was a while ago) and it turned out fantastic. However, if I was goig to tune it right on a steady state...

Quoting my own post.

How much horsepower are you hoping to achieve? We really haven't made that clear. You'll find a lot of Hondata haters on line. I've only touched it twice, and I really couldn't justify running it over Uberdata. I hear Neptune has great things for nitrous control, so it might be worth a look...

A window switch is a polar (on/off) switch that only closes it's circuit if a certian voltage is being fed to it. I.E. It's a switch you can set to only turn on @ certian RPM levels. Run your WOT switch through the window switch, and set the window switch to 3600-6500 rpms. This way you won't...

For "Mild" nitrous: Get a Wet Kit Get and MSD timing unit (retards timing when Nitrous is armed) Run a step higher on your fuel pill (if you are running 50 shot nitrous, run 75 fuel). Run plugs 2 steps colder. For "Wild" nitrous, run all of the above with the following added. New Rods...

You are going to need to find a local tuner who knows what they are doing, and you are going to have to be nice to him. A lot of tuners find it irritating when someone jumps on them to tune without even trying to understand it. Be patient and humble when you go about asking.

Well I think I just told you to wait and rebuild the motor. Be patient. As for the 550s, you could run them with the FMU, but that dosen't mean you should. Hella fuel pressure + Stock Honda Map + 120% larger injectors = gasoline swimming pool inside your intake manifold. So if I was going to...