Recent content by MSRJDub

So I finally(I hope)worked out what I think was wrong withmy brothers sohc zc swap.My question is is since the dohc zc can use an 88-89 teg ecu,can the sohc version use it? I tried it,the car will crank,but won't actually start.I'm not even 100% sure I fixed what needed to be fixed,I just...

Don't care much for the thread jacking,but do appreciate the bump,as I haven't gotten any further in my perdicament.

Well,I still haven't thought of any ides of what could be wrong with this damn car.I'm also REALLY trying to make it so I dont have to go through and do the wiring all over again. So my question is(since I don't have much experience with them)would I be able to use a multi-meter or something...

Well still no luck.The resistro box is still making a constant huming/grinding type noise.We tried replacing the resistor box and it still makes the noise.Also 2 of the plugs were mixed up,but hwne switched it didn't make any difference.The video I took didn't do any good since it didn't pick up...

No,no battery relocation.I'ma see what I can do tomarow. I found somethin that could potentiolly be a problem.Whatever that little ruber boot with the 2 wires running to it is(righ tnext to the oil pressure sensor,might not be properly connected,as my brother was the one that disconnected most...

K,thought that was what it was called.My brother continued to mess with it.It does have something to do with the main relay,because when he disconects it and turns the power on,the car doesnt make a noise and the cluster lights are fine. Also,from just being on,or from trying to start the...

Hey guys.I got another question(fuck) So I finished up all the wiring about an hour ago and we preceded to get it ready to start.We put the batery back in,plugged the ecu in and whatever else needed to be done.Now there are 2 seperate problems we have. 1)When we turn the car to"on",the...

Just came back in from the garage.Almost done :). I still need an extra ecu pin so I can input C1 to B10,and then just run the 2 wires from A3&7 to the injectors.Then hopefully we don't throw any codes and we can start this son bitch. Thanks for all the help you guys,I'll let you know how it...

Thas what I originally planned to do,but I just wanna make sure it's not a wire I'm gonna need to re-route or anything.

Right on.Well I'm to the point to where I might be able to just avoid dippining anything and just cut and solder everything. I have one more question though.It says B12 should be empty,but the clip on this car is occupied by another wire(red/white).I know I'm not looking at the clip wrong,so...

It's all good.You did kinda come off like a dick,but with all the stupid ass questions I see on here without people searching,I wouldn't blame you if it was intentional.But yeah,that answered my question perfectly.Appreciate it man:D Re-Ronin:I would love to do it that way.The only problem is...

Well first,I am very aware of the search button and that writeup,I mean,the damn things stickied/pinned or whatever you want to call it,and that was the whole purpose of this thread.That writeup does not clarify if I'm supposed to just cut,or splce into the 4 wires as I previously stated.Thanks...

Ok so heres the deal.Me and my younger brother are swaping a sohc zc into his 91ef and everything has been goin very well up untill now.I searched the forums for some help,really couldn't find anything that seemed helpful.So I just have 2 questions-(I'm useing the writeup stickyed(sp?)here by...

Right on,I actually expected to spend a little more.You suggest any turbo kits?Just looking for something not to pricey,not gonna boost more than 10 pounds anyways.

Sounds good.I know it may vary for every state,but any idea how much a good tune job would cost?