Recent content by Omar

  1. O

    vtec head on a 88 hb d15b2

    What is an IAB. My buddy is putting a vtec head on a d15b2 and need to know what an IAB is and where it is located.
  2. O

    h22a crank pulley remover??????

    If the engine is in the car all you have to do is take the starter off to were you can see the flywheel and have some one stick a flat head screw driver were you can hold the flywheel from moving while someone takes a breaker bar and breakes the bolt loose. It takes it a little bit off force but...
  3. O

    Need Engines Wiring Harness

    I am needing a OBD1 H22a wiring harness for my 92 Honda Prelude with the JDM H22a swap. Right now I have the H23A1 harness and the H23A1 Distributer running with the p14 ECU. This move my rev limiter to 6500 rpm's and no VTEC. I only did this b/c I needed my car to take my back and forth from...
  4. O

    H22a Throttling issues, need help!

    I swapped the JDM H22A with the LSD tranny into my 92 Prelud and it seems that I was having the same problems. And I talk to my buddy about it he said to try putting a new main relay or a fuel pump. I did both at the same time and it fixed the problem. So I don't know what really fixed it the...
Back
Top