Calesta

Tons of stuff for sale! aka Mike's garage liquidation...

Necessary information:

Why I'm selling: I'm moving soon, plus I'm short on cash, so this stuff has to leave my garage as soon as possible. I leave my current house in mid-July, so please act quickly if you're interested in anything!

Location: I'm in Austin, TX and would prefer to sell most of the big stuff locally, but shipping can be arranged if necessary.

Name: Michael
Phone: 512 619 3099
Email: vryce@mail.utexas.edu

If you email or call me, please let me know which forum you saw this on and what your user name is. It makes things so much easier to track online.

All prices are without shipping. Payments must be by money order, cashier's check or PayPal only, cash is ok in person.

Pictures are linked so I don't kill the 56k guys viewing this topic.

If you don't know who I am, pretty much anyone on staff at HondaSwap, Civicland, or ImportDriven can vouch for me.

-----

Color coding:

RED = sold, stop thinking about it
ORANGE = pending sale, both parties have agreed on transaction, but part(s) might become available again
GREEN = someone called "dibs" on it, and it's still up for grabs- first cash gets the part(s)!

-----

89 CRX Si rolling shell! $150 obo Too many pictures to link individually, so click here.
Read the description on the page. If you have questions, email me.

The doors and sunroof are now gone. The shell is now $150 obo, picked up in Austin, TX.

-----

SOHC ZC non-VTEC block and head available, will post pictures later. Inquire via email or PM.

-----

Front seats from 98 Civic: $60 obo Picture here
Padding is great, seats fairly clean, grey color, includes headrests, can deliver in Austin (or possibly Houston).
PENDING to Rocky @ Austin

92-95 Civic sedan/coupe red/clear taillights: $40 Pic 1 Pic 2 Pic 3 Pic 4
Used red/clear tails from my Civic. The passenger side pieces are a little dirty and can use cleaning, but there are no cracks or scratches in the lenses. The fit on the car is great. The driver's side inner piece has a post broken off (1 of 3) that you can see in Pic 4, but the housings still seal up against the car just fine. All seals are included, even though not all are shown in the pictures.
DIBS to Robert M. @ email
PENDING to EGProject @ HondaSwap
PENDING to Red97gst @ TexasRacingScene

6.5 inch Kenwood speakers! $30 for Kenwoods (Alpines are sold) Pic 1 Pic 2 Pic 3 Pic 4 Pic 5 Pic 6 Pic 7
One pair of Kenwood KFC-1677 speakers (no box/papers).

CRX Si wheel: $20, no tire Pic 1
Just one- no center cap, no tire. 14x6 I think.

Integra wheels: $60 for the pair, including tires Pic 1 Pic 2
One pair, no curb damage, no heavy scratches, center caps included. Tires are Michelin XGT-H4 with a few thousand miles left on them. Wheels are 14x6.
PENDING to yourmom25 @ Houston-Imports


New Items in this section (non CRX Si stuff)

Bike rack (trunk mount): $20 obo Pic 1 Pic 2
Wal-Mart special. It's not glamorous, but it works. It's not the most secure thing out there, but it will definitely get one or two bikes to and from your favorite trail.

Euro clear corner lenses for 92-95 Civic sedan: $10 obo Picture here
Used, no cracks. These lenses will NOT fit the hatch or coupe- they will only fit the sedan.

Euro clear corner lens, passenger side only for 92-95 Civic sedan: $5 obo Picture here
Used, no cracks. Just one. Again, this will NOT fit the hatch or coupe.

Denji Gen 2 projectors, 92-95 Civic: $50 obo Pic 1 Pic 2 Pic 3 Pic 4 Pic 5
Used for about one year. Low beam lenses have the normal "Denji crack" that always shows up after a few hours, but the beam pattern is not affected. Passenger side front housing has a slight hole from rocks on the highway. Bulbs NOT included.

Rear brake discs, 88-00 CRX/Civic: $20 obo Pic 1 Pic 2
Freshly resurfaced by a Honda master tech at a Dallas Honda dealer, plenty of meat left, just has a little bit of tarnish from sitting for a few months. These are 9.5" rotors, and should bolt straight up to any 88-00 Civic or Integra with rear disc brakes.

-----

NEW ITEMS! More from my 89 CRX Si:

AEM adjustable cam gear: $50 obo Pic 1 Pic 2 Pic 3
This was on my SOHC ZC. It should fit on any D series cam shaft, but I'm not 100% sure that it will degree correctly on a D16Y8 camshaft. It will definitely work properly with any non-VTEC D series cam.

Charcoal can from 89 CRX Si: $5 obo Picture here
I don't know what that black bracket is, but it comes with the charcoal can.

Corbeau custom seat bracket, driver's side, 89-91 CRX: $70 obo Pic 1 Pic 2
Almost perfect condition, Corbeau # D966F. This bracket will fit any Corbeau seat made in the last 3-4 years, and is a perfect bolt-in to the driver's side position on an 89-91 CRX. This will NOT fit the 88 CRX. Stop playing around with used seats and get a good Corbeau race bucket into your Rex.

Bumper lens set, OEM, 88-89 Civic/CRX: $10 obo Pic 1 Pic 2 Pic 3
OEM Honda parts, slight cracks on one, other one has no cracks. Cracks do NOT go through the plastic. These came out of an 88 sedan.
DIBS to D16-pullin B16's @ Civicland

Headlights, 88-89 CRX/Civic: $40 obo Pic 1 Pic 2
OEM Honda headlights and brackets, 88-89 Civic/CRX only. Whatever bulbs that are still inside are included.

Headlights, 90-91 CRX/Civic: $40 obo Pic 1 Pic 2 Pic 3 Pic 4
OEM Honda headlights and brackets, 90-91 Civic/CRX only. I'm pretty sure that these are for the 90-91, but I got them as loose items. Look at the pictures to make sure that the brackets (on the back) are the same as the ones you're replacing. If they don't work out, you can always swap mounting brackets to make these fit your car- the headlight housings themselves were the same from 88-91.

Hood, 88-91 CRX (maybe Civic hatch/sedan too): $50 obo Pic 1 Pic 2 Pic 3
OEM Honda hood, came from my 89 CRX Si. Squirters and emblem have been shaved and filled. Hood comes with super duper wannabe carbon fiber design (don't ask) on top of primer. This hood is ready to paint- just lightly sand, install and spray away.
DIBS to preludeboy79 @ TexasRacingScene

Radiator, 88-91 CRX/Civic: $20 obo Pic 1 Pic 2
Will fit 88-91 Civic/CRX. Radiator suffered some damage (but no breaks) during engine removal, but it still holds water without leaks. I haven't tested it under pressure. Sold as is.

Downpipe, OEM D16A6 for CRX: $5 obo Picture here
Came from 89 CRX Si with D16A6 engine. This bolts up to the stock D16A6 exhaust manifold.

DOHC ZC alternator: $40 obo Picture here
Came straight off a DOHC ZC changeover. Assembly spins freely. Untested, sold as is.

89 CRX Si rear wiper motor assembly: $5 obo Pic 1 Pic 2
Untested, sold as is.

CRX HF fuel rail: $20 obo Pic 1 Pic 2
I'm pretty sure this is the same fuel rail that's on all the D series engines. It will definitely work on all D series engines.

Heater core, 90 CRX Si: $20 obo Pic 1 Pic 2 Pic 3 Pic 4
Untested. It has a hole on one side (Pic 3) that can probably be patched, or you can buy it to pull all the linkages and electronics off of it.

HF throttle body plus TPS sensor: $20 obo Picture here
Untested (sensor), probably good. As is.

Manual pedal assembly, 90 CRX Si: $30 obo Pic 1 Pic 2
Pedal assembly from 90 CRX Si, including brackets and sensors. Great for an auto to manual conversion.

Injector resistor box, 90 CRX Si: $20 obo Picture here
Untested, as is.

Injectors, 90 CRX Si: $30 obo Picture here
Untested, as is.

Injectors, DOHC ZC: $30 obo Picture here
Untested, as is. One of the injectors has a cracked plastic sleeve (3rd from left), but that can be easily replaced.

Master cylinder and booster, 90 CRX Si: $20 obo Picture here
Untested, as is. Includes reservoir and vacuum hose with bracket and valve.

Intake manifold, 90 CRX Si, PM6: $30 obo Pic 1 Pic 2 Pic 3
Pulled from 90 CRX Si, great for MPFI conversions.

Intake manifold, CRX HD, PM8: $10 obo Pic 1 Pic 2 Pic 3
From CRX HF, works for MPFI conversions too.

Radiator fan, 88-91 CRX/Civic: $40 obo Pic 1 Pic 2
Pulled working from 89 CRX Si. Includes shroud.

Focuz short shifter, 88-91 CRX/Civic: $20 obo Pic 1 Pic 2
Pulled from 89 CRX Si. Rubber boot has a crack, but it doesn't hurt functionality at all.
DIBS to D16-pullin B16's @ Civicland

CRX Si short ram intake: $10 obo Pic 1 Pic 2
Comes with filter. Will probably fit non-Si engines with log style intake manifold too. Super ghetto rigged rubber pad (by previous owner) to prevent shorting against your battery.

SOHC ZC short block: $70 obo Pic 1 Pic 2 Pic 3
This is a REAL SOHC ZC short block. Identical to USDM D16A6 short block. Pulled from running 89 CRX Si with blown head gasket.

SOHC ZC camshaft: $70 obo Pic 1 Pic 2 Pic 3 Pic 4
This is a REAL SOHC ZC camshaft. You can tell by the weird lobe on the distributor end of the cam. This cam has 5 degrees more overlap and 10 degrees more total exhaust duration than the D16A6 cam. Good for 5-10hp on top of the D16A6 with tuning.

SOHC ZC head: $50 obo Pic 1 Pic 2 Pic 3
This is a REAL SOHC ZC head. It's really no different from the D16A6 head except for the camshaft, which is NOT included. Head includes all valvetrain components. Pulled from running 89 CRX Si with blown head gasket.

SOHC ZC valve cover: $20 obo Pic 1 Pic 2
This is a REAL SOHC ZC valve cover... no different from the SOHC D series non-VTEC valve covers. Comes with cool red breather filter and cool "burn your hands" blue aluminum oil (710) cap.

D series starter: $30 obo Pic 1 Pic 2
Pulled working from running 89 CRX Si. Definitely fits the DOHC ZC transmission, should fit the 88-91 D series engines and transmissions too. You get the gee-whiz neato red battery cable as a freebie.

Throttle position sensor: $20 obo Pic 1 Pic 2
Another random part in my big box of stuff. Untested, as is. I assume it came off the same 90 CRX Si a lot of my other parts are from.

-----

All of the following parts came from my 89 CRX Si:

Exhaust manifold from D16A6: $25 obo Pic 1 Pic 2 Pic 3 Pic 4 Pic 5
Comes with heat shield and a questionable O2 sensor with no wire. Maybe you can use it to turbo something.

Alternator for 88-91 D series engine: $50 obo Picture here
This was on my SOHC ZC, which is the same as the D16A6 block. It should fit on any D series engine.
PENDING to ckyhimself @ HondaSwap

Brake handle cover, 88-91 CRX: $5 obo Pic 1 Pic 2 Pic 3
DIBS to crx-chica @ Houston-Imports

Center console section with cigarette lighter, wiring, and ash tray, 88-91 CRX: $10 obo Pic 1 Pic 2
DIBS to hatchynos91 @ Houston-Imports

Center/shifter console cover, 88-91 CRX: $10 obo Pic 1 Pic 2 Pic 3
DIBS to hatchynos91 @ Houston-Imports
DIBS to crx-chica @ Houston-Imports

Center vent/clock combo, 88-91 CRX: $20 obo Pic 1 Pic 2
Don't ask about the tweed- I didn't do it. The vents are fully intact, and the clock is functional.
DIBS to D16-pullin B16's @ Civicland

CRX Cargo Cover and Divider, 88-91 CRX: $50 obo Pic 1 Pic 2 Pic 3 Pic 4 Pic 5

CRX Si exhaust + catalytic converter, 88-91 CRX: $30 obo Pic 1 Pic 2
2 inch crush bent, pipe in very good condition, no resonator, needs new muffler, hangers intact (no rubber bushings).

Glove box, 88-91 CRX: $5 obo Pic 1 Pic 2
Screws and miscellaneous junk included at no extra charge.
DIBS to dreded90crxsi @ HondaSwap
DIBS to D16-pullin B16's @ Civicland

CRX Si rear triangle pieces, 88-91 CRX: $20 obo Picture here
PENDING to cypher @ Houston-Imports

CRX rear interior side panels, 88-91 CRX: $40 obo for both Pic 1 Pic 2 Pic 3 Pic 4 Pic 5
Black, no breaks or cracks, trunk area light intact and functional, storage bins intact, "flaps" in back intact also.

CRX rear speaker brackets and grilles, 88-91 CRX: $30 obo Picture here
Yes, more super special funky tweed for your listening pleasure.
DIBS to MrMETHOD @ Houston-Imports
DIBS to Rob S @ email

CRX starter, D series block: $30 obo Picture here

CRX steering rack (manual), 88-91 CRX: $50 obo Pic 1 Pic 2
This came out of a 90 CRX Si- I think they're all the same from 88-91 though. This may fit an Integra, but I'm not sure.
DIBS to hcivic.com @ HondaSwap

CRX Si sway bars plus brackets: $50 obo per set ONE SET LEFT! Picture here

Complete MPFI Swap with some upgrades: $300 Pic 1 Pic 2 Pic 3 Pic 4 Pic 5 Pic 6 Pic 7
PM6 Intake manifold, larger Integra throttle body, STR fuel rail, injectors, injector resistor box, engine harness, distributor, 90 PM6 ECU socketed with Sebring fuel map. ECU not shown. Price is firm on this one- you're getting a ton of extras with it.
DIBS on ECU ONLY for $75 to Slammed89Integra @ HondaSwap
DIBS on everything but ECU and IM to pheonixb16aguy @ HondaSwap

----- SOLD ITEMS -----

Slotted rotors, 88-89 CRX: $10 obo Picture here
These were on my CRX, but wouldn't fit when I tried to use 90 CRX Si calipers on the 89 spindles. They should work on a 90-91 CRX Si, but I'm not sure. These are freshly resurfaced, but have a slight groove from my improper mounting under the 90 calipers, but that really shouldn't affect performance.
SOLD! to ExplicitSnow @ Houston-Imports

Rear LCAs, 89 CRX Si, will fit 89-91: $50 obo
SOLD! to civic 90 @ Houston-Imports

Strut/tie bar set for 88-91 CRX or Civic: $50 obo Picture here
From top to bottom: Front upper, rear upper, rear lower braces. These were on my CRX, and should bolt right up to any Civic or CRX from 88-91.
SOLD! to mrbean1130 @ Houston-Imports

CRX rear bumper cover, 88-91 CRX: $30 obo Pic 1 Pic 2
Black, no breaks, tears, or holes- license plate NOT included.
SOLD! to James @ Austin

CRX Si floor mats, 88-91 CRX
SOLD! to James @ Austin

Progress springs for 88-91 CRX: $50 obo Pic 1 Pic 2
I think these springs have one coil cut off, I'm not sure. They should lower your CRX about 2.5 inches. Check on Progress's site for the true specs.
SOLD! to James @ Austin

CRX Si sway bars plus brackets: $50 obo per set FIRST SET ONLY! Picture here
SOLD! to James @ Austin

CRX Si sunroof assembly plus headliner: $100
SOLD! to civic 90 @ Houston-Imports

CRX Si doors, 90-91 CRX: $100 obo for both Picture here
Yellow, has seat belt mounts on window frame, no interior door panels, no glass- just the door shells, hinges, middle and lower trim.
SOLD! to civic 90 @ Houston-Imports

CRX Si gauge cluster, 88-91 CRX: $70 obo Picture here
Bezel is painted silver, 127848.5 miles on odometer. No cracks.
SOLD! to civic 90 @ Houston-Imports

Speakers! $40/pair for Alpines, $70 for both pairs together | $30 for Kenwoods Pic 1 Pic 2 Pic 3 Pic 4 Pic 5 Pic 6 Pic 7
Two pairs of Alpine SPS-1629S speakers (come with boxes and documentation), and one pair of Kenwood KFC-1677 speakers (no box/papers). One of the Alpines has a tab broken off (Pic 7)- just solder the wire to it and you'll be fine.
SOLD! on both pairs of Alpines to GSRCRXsi @ HondaSwap

CRX front speaker grilles, 88-91 CRX: $5 obo Pic 1 Pic 2
Ugly tweed included for no additional cost.
SOLD! to GSRCRXsi @ HondaSwap

CRX rear spare tire cover, 88-91 CRX: $5 obo Picture here
SOLD! to GSRCRXsi @ HondaSwap

CRX steering column cover, 88-91 CRX: $5 obo Pic 1 Pic 2
Yup, more tweed. This is the clamshell piece that goes over your steering column.
SOLD! to GSRCRXsi @ HondaSwap

CRX tail lights: $30 obo Pic 1 Pic 2 Pic 3
These are from my 89, but they should fit all CRXs from 88-91. The styles changed slightly from 89-90 I think. There are two small cracks, but they don't go all the way through. You can see them in the pictures.
SOLD! to GSRCRXsi @ HondaSwap


Updated 2004-07-12 11:00pm Central Time

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

Blanco

Would you happen to have:

The plug for the clock
Inside trim for passanger's side mirror
Plastic cover for the rear view mirror?

__________________

92b16vx

If you can' trust Mike, you can't trust anybody. And damn, that's a for sale ad y0!!!

__________________
http://www.texansforfreedom.com/

Calesta

You mean the plug on the car side? I would have to cut it out from the car, but I can do that... the only problem is that I've already posted the shell as having the interior wiring complete.

Inside trim- I'll have to check. It's on the shell if I do have it.

I can sell you the whole rear view mirror assembly for $20 plus shipping.

<!--QuoteBegin-92b16vx@Jun 17 2004, 06:33 PM
If you can' trust Mike, you can't trust anybody. And damn, that's a for sale ad y0!!! [/quote]

Thanks John!

I tried my best to make the most thorough sale post I could... more information and pictures = better sales. The total count was about 13000 characters... some forums wouldn't even let me post the whole thing as one message.


Bump for me- edits made for pending items.

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

superflybunnygirl

Would you be willing to sell the doors on the rolling chassis seperate? I'll give the same 100 bucks you're asking for the other set of doors.

They would need to be shipped.

My e-mail is death_on_wings@hotmail.com

Calesta

I can do that. Shipping won't be cheap- I won't be able to just throw them in a UPS truck. Maybe you can help me with figuring out how to send something so heavy.

The doors have the interior panels, glass, and seat belts on them too, but have some damage- so $100 is fair.

Please call me so we can work this out.

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

GSRCRXsi

mike im interested in a bunch of this stuff. ill get back to you later tonight or tomorrow to discuss it more.

interested in :

Speakers! $40/pair for Alpines, $70 for both pairs together
CRX front speaker grilles (if tweed will come off)
CRX Si rear triangle pieces
CRX rear spare tire cover
CRX steering column cover
CRX tail lights (will you be willing to sell just the drivers side light?)

so i call dibs on this stuff until further notice

__________________
91 CRX si
95 Integra LS
I DO NOT answer tech questions via PM. Use the forums!!!
get a free iPod, yes it works!
get a free flatscreen, yes it works!

Please give what you can to the Tom Cote Medical Fund
http://honda-tech.com/zerothread/1828476

Calesta

Ian,

Speakers- want both sets or just one?

Front speaker grilles... the tweed should come off- it's just glue. You'll have to rewrap the grilles with something else though. I think it's just bare plastic underneath.

Triangle pieces- someone on Houston-Imports already posted up for them, but he hasn't paid me yet- so it's still in the air. First cash gets it.

Rear spare tire cover is available.

Steering column cover is available.

Tail lights- I won't part them out. They're cheap enough as they are, and much easier to sell as a set.

Call me man.

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

dreded90crxsi

I'll take the glove box, how much shiped to 34983? I've been trying to find one of those. PM me and let me know man.

__________________
Life is a race, what place are you in?

Calesta

I'm guessing $10 to ship the glove box at the very most. PM coming your way.

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

Calesta

FYI to everyone- I will be on the move and away from the computer for most of the weekend, but I'll have my lists on me... if you want to buy something, the best way to get in touch with me this weekend is to call. I'll have my phone on me, but won't be near a computer most of the time.

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

Calesta

Damn, another update...

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688

Slammed89Integra

How much just for the ecu?

What do you mean its socketed? Is it still in working order?

__________________
When this is all over I think we should get an apartment together.

brian11to1

How much for this shipped to 64015

__________________
90 Integra Sedan
B20B - BROKEN
LSVTEC - BROKEN
PMTR - running strong!
I DO NOT answer tech questions via PM. Use the forums!!!

Calesta

$75 plus shipping for the ECU. I mean it's socketed as in it's had the original fuel map chip removed and had a socket installed on top so you can put different fuel maps in. You can't do this with the 88-89 ECU, only the 90-91. The chip that's in there right now has a Sebring program on it. It's pretty damn good.

<!--QuoteBegin-SpodaB1@Jun 17 2004, 08:58 PM
How much for this shipped to 64015 [/quote]

Probably more than you're willing to pay. The whole thing is about 10 feet long, weighs about 30-40 pounds... it would probably be $50-100 to ship it. If you really want me to, I can check and see how much stuffing it in a truck on a pallet will cost. Let me know and I'll do that as soon as I get back from Houston on Tuesday.

__________________
DO NOT PM me with tech questions! Use the forums!
Intercrew Auto Salon - (972) 485-8688