Matts96HB

Just getting my FS thread started. Little bits and pieces will be added upon the way. Here we go.
LOCATION: Washington
PAYMENT METHODS: Paypal preferred, contact me prior to sale if you don't have a confirmed Paypal address, and we will see what we can work out.
PRICES: Are negotiable, unless otherwise stated.
SHIPPING: Will be standard shipping service (ground) unless you want to pay the difference. USPS or UPS.
PARTS ARE IN WORKING ORDER, UNLESS OTHERWISE STATED.
TRADES WILL BE CONSIDRED, LMK WHAT YOU HAVE!

Ok, here's what I've got:

96-98 Civic Projector stlye Headlights. Working condition, the only thing that doesn't work is the ring around the brights. Minor scratches, overall OK condition.
PRICE: SOLD TO LUIS998



Gauge Bezel from my EK. Great condition. NO scratches or cracks.
PRICE: $10 + Shipping



OEM B-Series clutch, flywheel, pressure plate. In working order when pulled from my EK. Used on a B18B with a B16 tranny for ~10k miles with no problems (clutch had been used prior to this, unsure of total mileage)
PRICE: $20 + Shipping



AEM B-Series Ram Air Intake tube. No filter included. Painted red to match my valvecover.
PRICE: $15 + Shipping



OEM B18B1(OBD2) Cams & Cam gears. In great shape. Less than 40k miles when pulled from my engine. Have been in a box covered with rags and bags since.
PRICE: $75 + Shipping



Virgin OBD2 P75 ECU (Manual Transmission). In good shape. Worked when I removed it from my hatchy. Small dent, but still in good working condition. No chips, unmolested.
PRICE: $50 + Shipping







EK Gauge Cluster. Manual transmission, 170,303 miles. Works perfectly. Needs bulbs because I removed them for my new cluster. NO SCRATCHES, NO DINGS, NO DENTS. Perfect shape.
PRICE: SOLD TO LUIS998





This is what I believe is a newer Civic Si (guessing 01-05 or something) Gauge Bezel with two housings for standard 52mm gauges. Brand new, never used.
PRICE: $15 + Shipping



A-Pillar w/ 3 spots for standard 52mm gauges. This came off of a 92 Accord. Not sure what else it will fit. In decent shape, not too beat up.
PRICE: FREE - You pay shipping.



Stock OBD2 B18B1 injectors. Work great, no seals included.
PRICE: $45 + Shipping



OEM B18B1 Oil pump (painted black). This worked when I pulled it from my motor.
PRICE: $10 + Shipping



OEM 1996 Civic fuel pump. In great working condition. Collector included, as well as the hose on the end of the pump. No wiring included.
PRICE: $10 + Shipping



OEM B18A1 Cams + Cam gears. These were not from my engine so I'm not sure how well they worked before. So I'll let em go cheap.
PRICE: $25 + Shipping



OEM B18B1 pistons and rods. Pulled these from my engine. Less than 40k miles on them, and they show it. Perfect for a rebuild, just buy new rings and bearings. Caps included but not pictured. Caps are also in excellent shape.
PRICE: $50 + Shipping







Set of OEM head bolts from my B18B1. In great shape, nothing is stripped.
PRICE: $10 + Shipping


Cant remember what this is called. I know it houses the crank seal. Its from a B18A1 that I stripped. It looks to be in good works, but I'll let it go for cheap.
PRICE: $5 + Shipping



OBD2 P2E ECU (For D16Y7, manual transmission). This ECU is in EXCELLENT shape.
PRICE: $30+ Shipping





Complete D16Y7 that I have had lying around for awhile. It has ~170k miles on it. Its extremely clean and was meticulously (sp?) maintained by my dad and I. Oil changes every 3,000 miles with full synthetic. It has been sitting for about a year, but everything is there except the slave cylinder for the clutch. PARTING THIS OUT, UNLESS YOU WANT TO PICK IT UP. Let me know what all you want from it. I have the complete engine, tranny, axles, shift linkage, some of the mounts, intake mani, exhaust mani, etc.
PRICE: ----



Set of EK taillights. Fake carbon fiber, but they don't leak.
PRICE: SOLD TO LUIS998



Volvo TDO4-12B turbo from my 89 760 wagon. This turbo needs a rebuild. The bearings need to be replaced. Shaft play and it leaks oil out of the exhaust and into the intake because of this. Comes with Wastegate, BOV as well as the complete turbo.
PRICE: PENDING SALE - AWAITING MONEY ORDER FROM WATKINSCRX89





B18A1 Intake manifold. In good shape.
PRICE: SOLD TO GEORGE777



B18A1 Distributor. Don't know if it works or not.
PRICE: FREE - You pay the shipping.



B-Series rear "T-Bracket", in good shape.
PRICE: $5 + Shipping



OEM B18B1 Exhaust manifold. In good shape, minimal denting on the bottom from my hatchy.
PRICE: $10 + Shipping



OEM B18A1 Exhaust manifold. Kinda hard to see in the pic but its in decent shape.
PRICE: $10 + Shipping



OEM B-Series stock axles. In good shape, no torn boots.
PRICE: $20 + Shipping (These are gonna be a bitch to ship)



OEM EK Civic Hatch rear wiper motor - works and wiring is uncut!
PRICE: SOLD TO LUIS998






Wooh, thats it. Questions? Email me at mnichols04@gmail.com. OR reply here, I check HS regularly.

kthxbai

__________________

Luis998

I swear, Matt....if my trade doesn't go through for the EG hatch that I want, I'm taking quite a few things you have off your hands. Best of luck on your sale my friend.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Thanks, Luis.

LMK what you want off of here. I'll put a pending sale tag on it. If you buy more than one thing I'll give ya some deals as well. Thanks man.

__________________

Matts96HB

Oh and also, for those of you just browsing..

I just realized that I put a picture of the cams under the pistons and rods sale. I'll be fixing that shortly.

__________________

Luis998

Thanks, Matt. Like I said, if my EG trade falls through, I will most likely be wanting both the front and rear lights, cluster of course, perhaps the rear windshield wiper motor and the three gauge pod. I will be letting you know soon as like I said, if this stupid guy doesn't come through, HELLO MATT'S PARTS ON MY HATCH!

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Luis998

I know that this is off topic, but perhaps you could re-assure me of something. Do you know if the intake and exhaust manifolds off a Y7 will work on a Y8? I am "guessing" yes, but am not sure at all. Thanks man.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Good deal man! I'll try to get some shipping quotes setup for ya, so if your trade does fall through, I can get those parts to ya ASAP.

In regards to the Y7 mani on the Y8 head, I'm pretty sure that will work. I have a friend of mine with a 98 EX. I'll take the Y7 mani over there tomorrow and try it out. I will also be adding more parts tomorrow

__________________

Luis998

Sweet and even SWEETER if the deal does not go through. I sent the guy some pictures of my hatch today, so we will see. Feel free to PM me whenever you add any new parts and what have you. Also, if it is not too much trouble, as we both know the deal with the EG is pending, if you would like to PM me a shipping quote to 32817 with the parts I mentioned before, please feel free. Thanks again.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Alright, I'll work on a shipping quote either tonight or tomorrow when I get off work. I'm probably going to have to do either one big box with a few smaller boxes inside, or several individual boxes. I'm going to try for the larger box, it seems that it would be cheaper that way.

__________________

Luis998

Whichever is the best for YOU. Just make sure you ship it by the post office. UPS, and I know because I've worked there for thirteen years, will cost you your first born, so will FedEX and DHL. As soon as I hear either way about the EG I will let you know as well.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Oh yes, thats what I was planning on doing. USPS seems to be the most reliable, anyway.

So, for a price on all that- Front and rear lights, 3 gauge pillar, cluster, and rear wiper motor - $40 + shipping. That is, of course, if your EG deal falls through. I'll hold those parts for ya until you find out.

__________________

Luis998

That sounds damn spiffy to me.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

jdmyo

hey man i see u have a lot of good parts on here but u really shouldnt sell those head bolts unless they are arp headbolts because oem head bolts on any honda motor are torque to yield bolts meaning once they are used they need to be thrown away if u try to use them again u are taking a very good chance of them not sealing well and causing the head gasket to fail or maybe some serious damage to the motor im not tryin to bash u or anything just inform u to maybe save u the trouble of having someone mad cuz their motor got messed up but besides that i just want to say good luck with the sale

awptickes

How much for shipping via USPS to 09063?

__________________
☻/ DIY/Howto HID Projector retrofit
/▌
/ \

Matts96HB

No offense taken! Thanks for the tip man. I'll be sure to point your post out to anyone who inquires about them.. and let them know of the risk. Its just that some people cant always afford brand new shit and need to get their car running ASAP, so I figured I might be helping someone out...

__________________

Luis998

Excuse me, sir, but would you happen to have any spare blinker fluid you would be willing to part out with? Someone pointed out to me that I don't have any and I do not want to drive my car until I get some. Thank God for public transportation.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Hey man, total price would be $50 shipped.

__________________

Matts96HB

Haha, I have two quarts. $165 shipped
hahahaha

__________________

Luis998

DUDE! JUST TWO!?!?!? I think my car takes four quarts! I'll pay you $400 if you can get me the other two!

I'm bored at work now as you can tell. We FINALLY converted over to Windows and now every work station has access to the internet.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Well, I can only get the JDM kind now so its gonna have to be $800 It makes y0 blink@ g0 mAd cArAz33 y0!

Haha. Thats awesome, I wish my work involved the interwebs.

__________________

Luis998

Hey Matt, where the heck do you live? Is it Washington? One of my employees just asked me, as I showed him your pretty lights and I just gave him the old "deer in headlights" look 'cause I have no freakin' clue. haha

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Luis998

LMFAO! I wish I could rep you for that.

__________________
Max? There is no max. Max just means you gave up.
This is my thread: http://hondaswap.com/engine-building...g-wind-110848/

http://hondaswap.com/members-lounge/...thread-278554/

Matts96HB

Yes, its Washington. Just about the coolest place ever. /sarasm
Haha.

I hate the rep system, it seems like it will never let me leave rep

__________________

dacheat

bump for a good garage sale thread!

__________________
marco....

watkinscrx89

What Would Shipping Be To 66025 On The Turbo?