gsr vs itr

is a set of itr cams worth $400?

  • probably not

    Votes: 0 0.0%

  • Total voters
    1

We may earn a small commission from affiliate links and paid advertisements. Terms

zackzerr

New Member
hey everyone im about to start the process of converting my lsvtec dd to a turbo dd.. its a b18a1 with gsr head. i have a set if itr cams laying around. i measured my gsr vtec lobe and it seemed to be taller than the itr. but my secondaries were quite a bit smaller... obviously i want fuel economy when cruising not in vtec but more power in vtec. should i install the itr cams or sell them? im only going for 12 psi as its stock with arp head studs... thanks for the guidance
 
You'll want to do the springs/retainers as well if you do go the ITR route.

lots of guys make good power with gsr cams, but the itr cams make a little more if they are gear-timed right to reduce a bit of overlap (-1i/+1e ish)
 
If you can sell them for $350-400 I'd do that. You can buy much better cams for that cash- the difference between the GSR and ITR cams isn't humongous.
 
Back
Top