Naturally Asperated b18c5

We may earn a small commission from affiliate links and paid advertisements. Terms

jdmcoupe97

Junior Member
Wadddup.....what aftermarket priducts u recomend to build a b18c5 in a 96-00 coupe?
 
Originally posted by projectxspeed@Feb 20 2005, 06:56 PM
How deep are you pockets (whats your budget)?
[post=463580]Quoted post[/post]​



wwell picture it this way ...im getting the c5 for madd cheap ... but i might jus end up putting on a good I/H/E
 
THrow a intake, header, CAI and some ITR cams with some cam gears and dyno it
 
Originally posted by david_jones001@Feb 21 2005, 10:25 PM
THrow a intake, header, CAI and some ITR cams with some cam gears and dyno it
[post=464284]Quoted post[/post]​



ITR engines generally come with ITR cams.....but I may be wrong though.

If it was me, I would get a GOOD header like a SMSP, Hytech, Toda etc, and good intake, some cam gears, and tune the shit out of it.
 
all about power to weight ratios.


I would go with
some type of CAI....I prefer the icebox
header,..............smsp,toda,hytech
exhaust,..........generic 2.5, no resonator, ES oval muff.
flywheel...........fidanza or any other overpriced chromoly unit
tranny is key,,,,,,,if your actually getting a complete ITR unit
obd1 is always nice

ITB's if your bold...........and there are ways to make them cheap...
 
I pretty much agree with JdMilan'slist. I would put Hondata in there as well.

I recently did this swap for a guy and ran it with Hondata on his P72. Now it was had several bugs on the dyno and was slapped on there patched together just for a baseline tune in a hurry....had his old Dc sports 4-1 header off his GSR(not good), had to slap on a borrowed GSR throttle body as his TPS was broken, bad airtemp sensor so it was run a touch rich with stock timing, no time to weld in an O2 bung for the wide band so it was tuned with an exhaust probe...and it still put out 177 at the wheel. I can't say enough for Hondata.
 
Back
Top