I have an Obd2 b18c1 and was wondering what all was required to get this to work on my motor before I invest in it.What I mean is how would the secondaries open with the Obd1 p75?Would I need to do more to get it to work properly or should I just go with Aem ems?Any input would be helpful before I invest money and then figure out I have to invest more to make it work.THAT WOULD SUCK.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
hondata S200 & p75
- Thread starter bcivicsi
- Start date
- Replies 7
- Views 1K
We may earn a small commission from affiliate links and paid advertisements. Terms
SolidDreamz
Senior Member
Dont really have the answer 4 u but i would just get a Skunk2 manifold or a JG edel mani. It would solve that problem and you'll get some more power for your motor IMO.
p75 is the LS computer. that is not what you want.
what you want is an obd1 p72
or an obd1 p28 and a skunk2 mani
http://www.tunewithcrome.com
the s200 is outdated.
what you want is an obd1 p72
or an obd1 p28 and a skunk2 mani
http://www.tunewithcrome.com
the s200 is outdated.
So if I do the crome system am I going to have to get a skunk2 Intake manifold to do away with the secondaries?Is that the best way to go is to do away with the secondaries I dont want to loose hp.Because my plan is to in the next month turbo it.where do you get crome at?Will the aem ems system open the secondaries or will I still have to do away with them?Thanks for all your help
crome will run on just about any obd1 ecu.
the p72 has IAB control. the p28 does not.
you can upgrade to the skunk2 intake mani (or any other kind) and use a p28 (cheaper, easier to find than an obd1 p72)
OR
keep the stock mani and run a p72
http://www.tunewithcrome.com
the p72 has IAB control. the p28 does not.
you can upgrade to the skunk2 intake mani (or any other kind) and use a p28 (cheaper, easier to find than an obd1 p72)
OR
keep the stock mani and run a p72
http://www.tunewithcrome.com
Ok so a p28 does it need to be stock when I buy it or can it be chipped with like a skunk2 chip?Is the manifold going to make me loose anything because I hear that a skunk2 manifold makes you loose bottom end.Or can I buy the ecu off of crome?Sorry for all the questions just dont know much about engine management.Trying to see what all I need to not loose hp maybe gain a few