My New Swap

We may earn a small commission from affiliate links and paid advertisements. Terms

Originally posted by SiR Kid@May 11 2003, 04:01 AM
Car and swap looks clean...

You video's are WEAK.

It's called burnout... where's the SMOKE?!?

I have very crappy tires on the car: Michelin XGT4s. With only a bit of battery power left in his digital camera, my brother took three videos. One was buggered. He named the files. I never renamed them. Though, the night before, when I unveiled the swap in Penticton, BC, I had a much better burnout. It was not recorded. Probably lost a bunch of rubber and could smell the clutch a bit.

But, anyway, thanks for the compliment on the car and swap.
 
Originally posted by whiteboyscivic@May 20 2003, 03:31 PM
hey so does the vtec work with block? and do you recommend this swap ?

:readfaq:
 
Originally posted by whiteboyscivic@May 20 2003, 03:31 PM
hey so does the vtec work with block? and do you recommend this swap ?

It most certainly does work and I highly recommend the swap. Just don't rev over about 7200 rpm, which is out of the peak power and torque band anyway, and you'll be fine with the approximately 1.539:1 rod ratio. Of course, if you choose to build the bottom end, disregard the 7200 safety barrier.
 
B20B block is completely stock internally except for the intake valve reliefs on the pistons. They're enlarged. The B16A head is completely rebuilt, with ITR valve springs, porting & polishing and a 3-angle valve grind.
 
Back
Top