Hondaswap.com | Honda Technical & JDM styling Forums

90civicboy · 05-15-2008, 08:12 PM

would it be possible to get a f22c1 s2000 motor and trans like so:2004 HONDA S2000 F22C1 Motor 6SPD 20K Miles >> F22C F22 - (eBay.ca item 310049149692 end time 18-May-08 23:01:54 EDT) and put it in a pickle fork boat like so:http://media.motortopia.com/files/49...4/100b7320.jpg and get it to work right? just something i though of last night.

AHHVTEC · 05-15-2008, 08:45 PM

i dont see why not there are all kinds of boats with car motors in them

90civicboy · 05-15-2008, 09:09 PM

thats what i was thinking, light weight boat, light engine, 6 speed i think it would be awesome. i know a guy that has some sort of very rare old corvette motor in a boat almost like the pic and it goes pretty good

90civicboy · 05-15-2008, 09:11 PM

Vendio.com if you look at the pic, where the tranny ends and the drive shaft mounts do you thing i could fabricate something to attach that to the shaft that drives the propeller?

AHHVTEC · 05-15-2008, 11:26 PM

with money and time you can do it

FObangah · 05-24-2008, 07:37 PM

It is defenitly possible but I don't see it going well unless you could find a smaller automatic tranny for it. K-series tranny with only one output shaft maybe???? but then again you would have to find/modd an ECU to run the F20 with an auto. The 6 speed from the s2k is gonna move the motor to far foward for a "pickle fork" style boat application, not to mention fabbing up linkage and hydrualic lines for the F20's clutch. Oh yeah and then you'll have to figure out some form of radiation to keep the motor cool. It won't be easy unless you plan on only driving on fresh water all the time. Not to mention your adding alot of wait to the rear of the boat, you'll have to balast the front to compensate for that also. Theres alot of stuff to consider befroe attempting something like this. You could probally have a bad ass MERC out board built for the price of an F22/20 and tranny anyhow. I know different is cool but it would save you alot a head aches. Just my $.02

If you decide to go on with it GOOD LUCK!!!

90civicboy · 05-25-2008, 01:19 PM

thats why i called the thread "just an idea"

FObangah · 05-26-2008, 06:02 PM

thats why i said "just my $.02 "

90civicboy · 05-26-2008, 07:09 PM

gotcha

thomasz · 06-18-2008, 09:51 PM

That's interesting. Job well done.

05-15-2008, 08:12 PM	#1
90civicboy Youngest on HS :P Join Date: Oct 2007 Location: BC, Canada Age: 15 Posts: 569 iTrader: 0 / 0% Ride: ED7 Civic Blog Entries: 2 Rep Power: 19	just an idea would it be possible to get a f22c1 s2000 motor and trans like so:2004 HONDA S2000 F22C1 Motor 6SPD 20K Miles >> F22C F22 - (eBay.ca item 310049149692 end time 18-May-08 23:01:54 EDT) and put it in a pickle fork boat like so:http://media.motortopia.com/files/49...4/100b7320.jpg and get it to work right? just something i though of last night.

05-24-2008, 07:37 PM	#6
FObangah Senior Member Join Date: Sep 2006 Location: Richmond VA Age: 25 Posts: 566 iTrader: 0 / 0% Ride: 2003 S2000, 1991 Integra GS Rep Power: 15	It is defenitly possible but I don't see it going well unless you could find a smaller automatic tranny for it. K-series tranny with only one output shaft maybe???? but then again you would have to find/modd an ECU to run the F20 with an auto. The 6 speed from the s2k is gonna move the motor to far foward for a "pickle fork" style boat application, not to mention fabbing up linkage and hydrualic lines for the F20's clutch. Oh yeah and then you'll have to figure out some form of radiation to keep the motor cool. It won't be easy unless you plan on only driving on fresh water all the time. Not to mention your adding alot of wait to the rear of the boat, you'll have to balast the front to compensate for that also. Theres alot of stuff to consider befroe attempting something like this. You could probally have a bad ass MERC out board built for the price of an F22/20 and tranny anyhow. I know different is cool but it would save you alot a head aches. Just my $.02 If you decide to go on with it GOOD LUCK!!! __________________ 2003 Honda S2000 (ap1); AEM V2 intake, INVIDIA duals, ACT SS clutch disc, "walker" style Poly kit and eye-lids, 17" VSR's 1991 Acura Integra GS; DC front leather seats and a Kenwood deck s2000 fastest 1/4 mile; 13.89 at 99.31 MPH (cold night)

05-26-2008, 06:02 PM	#8
FObangah Senior Member Join Date: Sep 2006 Location: Richmond VA Age: 25 Posts: 566 iTrader: 0 / 0% Ride: 2003 S2000, 1991 Integra GS Rep Power: 15	thats why i said "just my $.02 " __________________ 2003 Honda S2000 (ap1); AEM V2 intake, INVIDIA duals, ACT SS clutch disc, "walker" style Poly kit and eye-lids, 17" VSR's 1991 Acura Integra GS; DC front leather seats and a Kenwood deck s2000 fastest 1/4 mile; 13.89 at 99.31 MPH (cold night)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good Idea, Bad Idea	hondarin	Members' Lounge	18	12-10-2007 06:00 PM
D15b vtec, turbo. Good idea, Bad idea?	Mooky_Stank	Forced Induction	5	04-01-2007 06:44 PM
hx mani good idea bad idea??	Tenzodelsol	Forced Induction	4	04-19-2004 06:13 PM
Good Idea or Bad Idea?	Circuit	Forced Induction	6	02-08-2004 10:32 PM
good idea bad idea	R.E.Developement	General Tech and Maintenance	1	09-11-2003 01:11 AM


Welcome, Guest! Please Register or Login: User Name Password Members have access to more features, better search, and see fewer ads! It's free, what are you waiting for?

05-15-2008, 08:45 PM	#2
AHHVTEC HS TECH Join Date: Oct 2006 Location: Alabama Age: 29 Posts: 8,793 iTrader: 1 / 100% Ride: dc5,mk4 gti,2nd gen civic, Rep Power: 160	i dont see why not there are all kinds of boats with car motors in them

05-15-2008, 09:09 PM	#3
90civicboy Youngest on HS :P Join Date: Oct 2007 Location: BC, Canada Age: 15 Posts: 569 iTrader: 0 / 0% Ride: ED7 Civic Blog Entries: 2 Rep Power: 19	thats what i was thinking, light weight boat, light engine, 6 speed i think it would be awesome. i know a guy that has some sort of very rare old corvette motor in a boat almost like the pic and it goes pretty good

05-15-2008, 09:11 PM	#4
90civicboy Youngest on HS :P Join Date: Oct 2007 Location: BC, Canada Age: 15 Posts: 569 iTrader: 0 / 0% Ride: ED7 Civic Blog Entries: 2 Rep Power: 19	Vendio.com if you look at the pic, where the tranny ends and the drive shaft mounts do you thing i could fabricate something to attach that to the shaft that drives the propeller?

05-15-2008, 11:26 PM	#5
AHHVTEC HS TECH Join Date: Oct 2006 Location: Alabama Age: 29 Posts: 8,793 iTrader: 1 / 100% Ride: dc5,mk4 gti,2nd gen civic, Rep Power: 160	with money and time you can do it

05-25-2008, 01:19 PM	#7
90civicboy Youngest on HS :P Join Date: Oct 2007 Location: BC, Canada Age: 15 Posts: 569 iTrader: 0 / 0% Ride: ED7 Civic Blog Entries: 2 Rep Power: 19	thats why i called the thread "just an idea"

05-26-2008, 07:09 PM	#9
90civicboy Youngest on HS :P Join Date: Oct 2007 Location: BC, Canada Age: 15 Posts: 569 iTrader: 0 / 0% Ride: ED7 Civic Blog Entries: 2 Rep Power: 19	gotcha

06-18-2008, 09:51 PM	#10
thomasz Junior Member Join Date: Apr 2008 Posts: 10 iTrader: 0 / 0% Rep Power: 0	That's interesting. Job well done.