Search results for query: *

Has anyone use the GSR gridle on a B16? What parts would i need? bolts? windage tray? Also would a GSR oil pump work on the B16 for more flow due to I may turbo the B16. Thanks guys Alohaz.

I need some help, I built a D16 using a 2000 Y8 head on a 95 Z6 block. I'm using a Z6 head gasket and dropped in a block guard. Port and polished the head and Y8 manifold. I'm using prelude injectors (260's). I have a T25 turbo and vortec fmu 12:1. I have walbro 255 fuel pump and JG fuel rail...

as long as you have the harness that comes with the engine (p28) EX or SI. you don't have to add anything. It could be that he is using the stock CX harness and had to add the wires for the o2. Or he's using a VX harness, has vtec wires but might be 1 wire o2 I'm guessing, didn't get to see a...

I was going to use an A6 for my 92cx, A6 bottom and Y8 head, My A6 block had all piston seize ( from rust ) because my storage was leaking water. It has stronger main. This is what I was going to do. A6 bottom. ZC pistons and Y8 head. But I got a small turbo from a drifter friend of mine, So...

Make shure you have the EX motor mount (near timing belt). The Ex computer P28. The harness for the engine. Other stuff you should consider, Headers, CX's have the cat./exhaust manifold, and if headers are installed, cat.will be gone. Air intake, Cx won't fit too small Ex or Si transmission...

about using LS rods in the D15, It won't work. The rod end on the crank is smaller. I wanted to do the same. I ended up tossing the D15 and got a D16Z6. I used LS rods refitted end and used the D15B7 pistons (because they are flat tops) and a D16Y8 head. I think i'm getting about 12 to 1...

can do. I did. parts list Dx intake manifold (with every thing, if can) Dx throttle body, Dx water pipe (from theromstat to water pump) P06 computer (can use p05, but not full potential) 4 wire o2 sensor and a DX wire harness (engine side) and DX manifold or headers. DX spec spark plugs...

I thing you can use the P07, I thing it's from the vx engine, might be one wire o2

Hi, new guy, I'm going to do a mini me conversion to my 92 civc cx hatch 5 spd. This is my parts list. ------ 00 D16Y8 head, manifold, throttle body, and injectors. ----------A D15B7 long block(actually the whole thing, head and intake too) ---------DC sport headers ---------- 93 SI engine...