Search results for query: *

A co-worker of mine just bought a 90 accord two door. He was asking me what he could do to swap for minimal dollars. I thought maybe a head from a 95' accord sohc vtec and ecu, and then a turbo intercooler set up might be the cheapest and easiest route but i'm not sure. I drive a civic so i'm...

Hey, nice story Moron. He asked for instructions on cutting the hole in the "new fiberglass hood" he bought for the purpose of molding in a glass scoop I assume because the motor he swapped in sits too high. Where the fuck does welding come into play. This ain't mini truckin. Either help the...

:nobreed: Look at what your asking, then spell check, then try to clear up your question. Then you might get some feedback.

Sorry, it was working. Site must be down. :huh:

I asked this question a few months back and I recieved a link to the complete instructions. There are several versions of this conversion in the instructions, but the easiest way is the "Swap and Switch Method " shown on page 7. Print the whole thing so you can compare the other methods and...

SpodaB1 I'm glad your 90 honda places all the rest of the viewers in awe when you pull up to a light. But I am sure if you pulled along side me I could pick out some mods you really do need. Driving a gutted bucket is a crime. Go knock some other forum. What are you, twelve? :fuckyou3:

Sounds like a bad knock sensor. vtec won't engage with out one. Disconnect it. Ground a second knock sensor from your other motor and run a jumper wire to the PR3 ecu that your using. Fire it up. If that works get a new knock sensor. Make sure you have oil too. B)

I swear to god and Allah you cats have no imagination for sickness. Peep this. You know the Matrix movie cover. green 1's and 0's in a vertical cycle of digital code. Air brush this design on the car, but instead of using the one's and zero's use www.hondaswap.com as an endless pattern in the...

Cool I was just checking. Cuz if I did all the work I would be pissed if I didn't have to. Half the work is allready done anyway. Thanks for the feed back. One question Are the guys with these conversions using glass hoods or metal hoods. I'm not trying to cut up a $600 carbonfiber hood to do...

I have Avid on my 89hbdxb16. They don't vibrate at all. You'll have some from stepping into it but no negative feedback. They are pretty cheap too. Although I bought mine at cost. They come from Canada so there is a import tax usually added into the price which is still cheaper than Hasport...

US=112 hp and JDM= 130 hp are not the same and the motors are not the same. I would check Hasport for the mounts for this car. and see what they have before you commit to a motor. Last I looked they had a b16 swap set up for the 87.

We did a d16y8 head on my old d15 block. It turned out nice but the kid we built it for ended up wrecking a couple weeks later after he added NOS. Dumbass needed break work instead.

Dude, Why would you choose to force yourself to learn how to drive again. Why the fuck do you think Jap imigrants suck at driving so bad in a US car. I'm not saying they all suck but if you hopped on a plane to Japan and tried to drive over there you would understand. First time you crash what...

Fuck insurance rate hikes. Rates go off your age and your marital status thats why your parents shit is so cheap. Thats some pussy shit to whine about. You wanna race, you wanna drive fast. Buy insurance. You don't want to pay for insurance,move to fuckin Wisconsin where it isn't mandatory. By...

My friend put 96 civic lights in his Del sol with a little work. not too hard. I would ask around further though. B)

I don't plan on using the latches, just locking pins.

I'm trying to convert my 4th gen hb hood, headlight assemblies, and front bumper to fifth gen. Im shaving the corner lamps and using the stock 4th gen fenders which I have flared 4 inches. Will I need to change the core support. before doing this or is it a direct crossover. Are the hood and...

You can buy two part foam from any marine supply store or you can get a cheaper version of that foam from Home Depot. Personally I think that would be pretty much a waste, the first time you hit a curb by accident. Foam is harder to fix than Glass. But the time and energy put into building it...

I read somewhere that the SK7 is a U.S. model tranny and the Y1 is the jdm version. The difference is a y1 is limited-slip and the the U.S version is not. the way to see if your tranny is ltds is to look through the axle hole in the trans. If you can see straight through it is limited-slip. If...