Search results

  1. S

    I need $500 by Friday sale

    i dont feel like parting out the b18 im located in wisconsin (54805)
  2. S

    What CRX years will take a D16Y8?

    lol it is a d series.... you need the correct flywheel, clutch and tranny combo (any 88-91 d series combo) and you're golden. im sure you understand the issue of the difference between like 88, 89 and then 90-91 clutches/inputs shafts/flywheel sizes... so just take whatever combo, bolt it...
  3. S

    I need $500 by Friday sale

    I've posted on here a bit, but I usually hang over at HMT a lot more. but anyways here is the link over to HMT of all of the stuff... http://www.homemadeturbo.com/forum/index.p...;threadid=31534 any questions, my aim is : ssl2k, and email is nathan@sunfox.net, or you can pm on hmt. or ask in...
  4. S

    dpfi->mpfi wiring problems

    square the motor actually would fire up and run but only on 3 cylinders... it is a 5 wire plug (the dohc zc and the dpfi plug lined right up)
  5. S

    What CRX years will take a D16Y8?

    just get a cable tranny and put it onto the y8 y0
  6. S

    dpfi->mpfi wiring problems

    The car is a 90 DX automatic and I did the dpfi to mpfi swap and did the auto to manual conversion, the mtoor is a dohc zc...this was a 100% working and running motor and just swapped it inot this other car... well the #3 cylinder that you use the red wire from the #2 injector(from the orignal...
  7. S

    plexiglass for sub box?

    jesus christ im fuckin make base of the box out of mdf and sides with plexglass and bonod/resin the plexiglass is going to be a cover over the subs to protect them
  8. S

    base coat + clear pictures

    thanks guys if you look at the posts in my history, that is the only info i've used to learn plus whatever i've caught by watching ppl on shows like pimp my ride and shit like that painting (like gun movemtne and shit) you'll laugh when you see the tools i used
  9. S

    base coat + clear pictures

    http://www.cardomain.com/memberpage/532608/8 Considering I used a 6" round drill adapter to make the door panels flat and how the car was rearended I think it came out alright, not to mention, all the rust, rattle can basecoat, and i didn't have a long board. you can see how bad it was before...
  10. S

    problems with shooting clear coat

    i sprayed it a lot thinner and at like 30psi and it took away some of the orange peel (enough for me to be happy, basicly, im tired of fuckin around with this peice of junk and i want to get it boosted and back on the road) so i'll post some pics toma of the clear coated final product in the...
  11. S

    Need storage compartment

    I have one hit me up on aim @ ssl2k or msn : kennyfisher@hotmail.com or email me at nathan@sunfox.net to work out a price I have a full interior in good condition from a 91 si.... type k off black nayways contact me
  12. S

    problems with shooting clear coat

    yeah it just bugs the hell out of me i'm going to play with it some more today
  13. S

    cut up my bumper

    why not drop some cash and make that civic fast? put a intercooler in there right now for look and then start putting together a turbo kit
  14. S

    problems with shooting clear coat

    okay few little things I have a pressure regulator on the air comrpessor itself, That is set at wide open, then there is a watertrap that is directly after the air comrpessor (in line) that is set to like 10bar sio like 147ish psi, then there is a small regulator at the gun, that is where i...
  15. S

    problems with shooting clear coat

    Okay so I guess there is no way to reduce this clear coat (it is just a 2 part clear, hardner + clear)?? Are you sure that something like virgin laquir thinner or regular paint thinner wouldn't thin this out or something like that, or acetone? or something?? Well if it can't be thinned iwth...
  16. S

    Painted inside

    looks good i did the same to my crx except i used rubber undercoating i need to go go and redo it since it got all nasty from body filler dust
  17. S

    $700, what to do

    no matter what you do, dont' stay with the 1.5L. go with either a d16z6 or a zc in order to stay in yer budget. i like the zc cuz i got one, but you can get a ZC for under $500 for just the motor, so do that then save your other $200 for other little things and start saving towards a turbo...
  18. S

    Can you fix headers?

    dont waste the time cutting it out and rewelding new metal, go buy a $5 body work dent puller with a screw tip on it, then drill a few holes into the dent and pull them, then just cover the screw holes w/ welding tacs
  19. S

    Shifter vibrating??

    in my CRX I ran the exhuast straight back, under the gas tank and out the left side, i had used a peice of row-bar(sp?) and just made a soild mount of the exhuast. This was a very bad idea, It made a *very* soild brace to the motor and wouldn't allow it to shift forwards or backwards (motors...
  20. Try your Search on Google

Back
Top