Search results for query: *

If anybody has a junk dx civic or crx I need the cabin harness that goes all under the dash and all the way up to the headlights. I prefer the harness to be uncut...If anybody has one let me know. thanks

I was thinking about that tdc trouble code and one of my friends said that my pr3 ecu might be looking for a crank angle sensor. I'm not sure if this is true, does use a crank angle sensor or keep on getting a code for tdc?

ok i will try and wire up that sensor and maby its just way out of time because it runs excelent but i havent timed it since i built it and put it in the car...thanks for the help

ok well dosnt the ecu need to see that the engine is up to operating temp before it will let vtec work? because i get no signals from any of the vtec wires. but i also have a TDC code. will that have anything to do with the vtec??

ok that helps me out thanks.....so i can plug into the sensor on the thermostat housing and run the red white to c6 and then either ground the green white or tap it in with c12 and that should solve my code problem?

ok well im going to assume vtec wont work because only one of my ECT sensors is hooked up and its the one for the gauge that comes out of the head...my harness dosnt have a plug for the second one that tells the ecu the ECT. my question is how would i wire this? i have a spare harness with the...

ok i just checked it out.....the vtec solenoid is locking up fine when i give it 12 volts but the ecu wont lock it up.....i tested it and when the motor is warm and i take it up to 5000-6000 the ecu dosnt send any signal out... the ecu is giving out codes 6 and 9....they are TDC sensor and...

Ok thanks everyone. I'm pretty sure now that my vtec isnt working because my motor doesnt sound any louder at or around 4800 rpm's so Im going to go back and check my wiring.

I just finished up putting my ls/vtec motor and today i hooked up the vtec. My question is i cant feel a big difference from having vtec and not having vtec. Is there anyway to tell if vtec is working or should you be able to feel it? I was also wondering when vtec kicks in on a b16a with a...

Well first I had a zc in my crx and it did it but now i have an ls/vtec in the same car and it still does it. I havent tested the fuel pressure yet, but that what i was planning on doing next.

Whenever I try and start my car cold, it always has a hard time idleing at first and will sometimes shut off. Also when I try and rev my car up when its cold the motor will back fire and pop. Im thinking that maybe my fuel pump is going bad and is having trouble building up fuel pressure, but...

Ok that makes sense, because my crx was dpfi injection and I had to convert it over to mpfi, but my friends crx is already mpfi so i just need to do what racintweek said to do. thanks

I'm helping my friend put a zc into his crx si. Were almost finished but I'm having trouble figuring out were the two cam angle sensor wires are suppose to go. I know they run to the ecu but I'm not sure which slot they go to. We are using the crx si computer if that makes a difference.

I'm using an s1 cable tranny so that means i need a clutch for a 90-91 integra right?

I need to know which clutch will work on my S1 tranny for my ls/vtec swap. I think i need a clutch for 90-93 integra but I'm not 100% sure.

Hey, almost got my b16 into my crx and was wondering what rear engine mount bracket will work with the hasport mount kit? I already tried the stock braket but it wouldn't work. One of my friends was telling me that a rear bracket from a 2000 civic si will work. Is this true or not? thanks

The older 5.0 mustangs are not too expensive.

I had the same problem too. Make sure the other mounts are loosened up and then your going to have to give it hell and force it to fit. I had like 4 people helping me plus an engine lift and I still had trouble getting it to fit right.

I was wandering if anybody had a intermediate shaft and an o2 sensor for a 90-93 integra ls. thanks

I need a 90-93 integra throttle cable for my swap. If anybody wants to get rid of one let me know. :D