Search results

  1. Z

    Can you use factory motor mounts with this swap?

    Well i have recently stumbled upon a recently import H22a motor from japan that a guy is wanting to sell since he will no longer be using it to swap into his accord. It has everything- Engine, tranny w/LSD, the wiring harness all the way to the firewall (They cut everything on the motor at the...
  2. Z

    Where to tap vtec head for oil?

    Aight man, thanks alot. I knew I could count on you. You to sleeper. Thanks guys! -Keylan-
  3. Z

    swapping motor into 1992 EG hatchDX

    I did blow the d16z6, or well spun a bearing. SOOOOOO........
  4. Z

    Where to tap vtec head for oil?

    Aight thanks man. Anyone else, or any other way? Anyone who has done it? THANKS! -Keylan-
  5. Z

    Where to tap vtec head for oil?

    My freind recently bought a 93 honda civic coupe with a d15 non vtec motor. And it is slow as christmas. I told him I would sell him my d16z6 vtec head along with intake manifold and throttle body and all that. I know how to run the vtec wires and everything, I just need to know where to tap...
  6. Z

    swapping motor into 1992 EG hatchDX

    I did the exact same swap that you are doing except my DOHC ZC motor was and 89 model and I was putting it in my 93 hatchback SI. Pretty much dropped right in and plugged right up. I had to use my original distributor and that was it. I threw a code for vtec but that was because I was using a...
  7. Z

    starter and flywheel

    yeah all the wires are clean an not corroded and its only shiny in one spot on the flywheel becasue it dosent engage enough to turn it only rub up against it its not like it culd be installed wrong theres only two bolts i dont think theres anyway to adjust it. i got a hold of another engine and...
  8. Z

    starter and flywheel

    i have tried other ones that i know for a fact work
  9. Z

    starter and flywheel

    it does pop out just not far enough i took the starter out and i can see shiny marks where its touching the flywheel just not enogh to engage it i dont understand worked fine before disassemble , reassembled exactly same, now dosent work
  10. Z

    starter and flywheel

    ok ill have to look at it tomm. ill keep you posted since your the only one to give any imput on it but i really apreciate it
  11. Z

    GOTTAGET SOME HP

    MYGIFRIEND IS STRUTTING AROUD IN HER 96SATURN SC2 AND WHATS THE BEST BANG FOR THE BUCK THAT CAN BE RELIABLEBUT NOT TOO COSTLY SURE HEADERS INAKE EXHAUST ETC IS A QUICK CHEAP WAY TO GET SME EXTRA HP ? ITS IN DYING NEED OF SOME THANKS
  12. Z

    starter and flywheel

    Well me and my freind just finished completely rebuilding his d16a1 DOHC for his 88 integra. Well we get the motor dropped back in and everything bolted up and plugged back in. Everything ready for it to start up. Well we go to start it up and the starter just whines. So we thought the...
  13. Z

    starter ..... flywheel????????

    ok.. me and a buddy just got finished rebuilding a d16a1 for my 88 integ so we go to crank itand hear a winding noise .. after some tinkering we found out that the starter wasnt reaching the flywheel . we tested the starter and it poposout fine is ther any way we couldve somehowmissed some shims...
  14. Z

    Will these coilovers work on my car?

    Aight thanks. Any more opinions, or has anyone tried it? -Keylan-
  15. Z

    confused.....help

    well thanks for helping
  16. Z

    confused.....help

    ok... i have an 88 integ with the d16a1 , i was poking around hondata lookin for my ecu and noticed that the 89 integra "xsi" has a b-16a(jdm)..are the motor mounts the same from the 88 to 89 integra and if so the a b16 out if an 90 to 92 integra would bolt onto my car....right???????? I...
  17. Z

    Will these coilovers work on my car?

    Well I can get some ground control coilovers for $80 but they are on a 96 or 97 accord right now and I was wandering if they will work on my 93 honda civic hb Si. Will everything fit snug and fit if they will fit? Thanks in advance -Keylan-
  18. Z

    Drilling holes in the rear bumper

    I actually think they look pretty sweet on hondas and plan on doing it myself. And there is no definitioin for "rice" so you cant call it that. I hate when people say shiz is "rice". Everything is "rice" then. BTW-How many holes did you drill and how big? -Keylan-
  19. Try your Search on Google

Back
Top