Search results

  1. H

    NEEDED!!! 90 Integra MT shifter mounting 'bushing'

    i need the stock version of the BLUE part in the picture in this link, as well as everything within it (except for the shifter stick itsself)
  2. H

    NEEDED!!! 90 Integra MT shifter mounting 'bushing'

    I'm thinking it shouldn't be more than about a $20 part if it's used. Also I haven't tried the dealership but I tried AAP.org and the drawing didn't seem to show the part I need. I think it's probably part of the shift linkage how they package it, so I'll end up paying a lot more than necessary
  3. H

    NEEDED!!! 90 Integra MT shifter mounting 'bushing'

    For a 1990 integra with manual transmission, I am in dire need of the part the big ball of the shifter mounts into, which in turn bolts to the upper shift linkage. I do not know exactly what to call this part, but it is the only thing keeping me from getting my car on the road so i can sell it...
  4. H

    FS: 5Zigen 16" with Michelin rubber, perfect!!

    Selling my Integra so the wheels gotta go. They are 5Zigen FN01R-C 16" with Micheline Pilot SX GT tires. Only driven on for about 6 months, 8000 miles. Tires still have plenty of rubber, no damage to visible side of wheels at all, 2 minor chips on the inner lip, about 2mm each. Link to...
  5. H

    TONS of B series/ integra parts, aftermkt and stok

    also, the cylinder head is currently all together, and i would prefer to sell it that way (springs, retainers, valves, cams, gears, valvecover, vtec sol) please email me if you are interested in it, as i have a few people asking me to part it out
  6. H

    TONS of B series/ integra parts, aftermkt and stok

    something tells me i feel a few pages behind... also thank you everyone for knowing how to read and emailing me rather than replying!!!!! this is the only msg board that i've gotten no reply posts, another testament to the fact that brains do exist!
  7. H

    TONS of B series/ integra parts, aftermkt and stok

    B16A1 PR3 head $300 (bare) Skunk2 B16 intake manifold $200 SOLD B16A1 throttle body (PR3) $50 GSR water pump (5k miles) $30 SOLD GSR oil pump (12k miles) $30 SOLD USDM Integra Type R pistons, 0.25mm overbore (P73-A0). converted to floating pin and LS rod, if you are doing LS/vtec conversion...
  8. H

    Obd0 B18a1-odb1 B18a1

    this fuel rail would be a looks only piece for you unless you are running about 300hp. i just saw it in your sig so figured that's why you want it. stock honda fuel system is good to at least 300hp, i've heard all the way up to 400hp.
  9. H

    Obd0 B18a1-odb1 B18a1

    i think i forgot to answer your question about if oil temp sensor will throw CEL... i don't believe it will, but there is a small chance it might. to check your code pull the carpet back (pass side) so you can see the top of the ECU. turn the ignition to ON, and the LED in the center of the...
  10. H

    Obd0 B18a1-odb1 B18a1

    i'm open for trades, but really the only thing i need is a 64mm throttle body. but let me know if you have anything significant that might be worth trading. also pls see my webpage (linked in my sig) so you know what i already have, and thus don't need. otherwise i'm thinking $75 shipped for...
  11. H

    Obd0 B18a1-odb1 B18a1

    on the picture that is linked a few posts above mine, the sensor that is circled is a OIL TEMPERATURE SENSOR. it's function is to tell the car to turn on the radiator fan for 5 min if oil temperature is above a certain point (i think 210 degrees) when the car is shutdown. the car should run OK...
  12. H

    Spun A Rod Bearing After 6000 Miles!

    yeah, i knew the rod and crank were a loss as soon as i pulled off the rod cap and saw the bearing split facing down at me. i'm working on finding an LS crank still, but i've already purchased a set of Eagle rods for it. good point about rods being resized as well, i guess there isn't much use...
  13. H

    Spun A Rod Bearing After 6000 Miles!

    actually, i think i'm gonna put the crank on the wall o shame, along with my block with stripped head bolt holes, broken tools, etc. HAHA what you're saying about the damage to #4 sounds right to me, i doubt it's from gas in the oil like one of the guys at the shop was saying. i don't have...
  14. H

    Spun A Rod Bearing After 6000 Miles!

    gtpilot: great response! that is very helpful and i will relay the information to the engine builder in case he is unaware. the backs of the bearings did indeed have two black streaks, as you can see in the pictures i now have available... here's the pictures: WARNING, BIG PICTURES #3 crank...
  15. H

    Spun A Rod Bearing After 6000 Miles!

    i broke it in, not going over 3500rpm, for about 1000 miles. that is more than enough time for the engine to break-in, as i've been told my numerous sources. hell, the engine builder said i probably didn't really need to break it in at all, but it's good insurance. you all must be of the...
  16. H

    Spun A Rod Bearing After 6000 Miles!

    ok, let me run down the list, and i will try to provide pics tomorrow: -rod bolt not torqued properly: done by machinist -low oil level: checked oil the day before, had not dropped more than 1mm on dipstick in last 2000 miles -bearings clearanced too tight: again, machinist -oil pressure: i was...
  17. H

    Spun A Rod Bearing After 6000 Miles!

    5 months ago i rebuilt my LS/vtec with some better parts, and my machinist used Clevite main and rod bearings, ensuring me they are fine for 8500rpm duty. well after 6000 miles rod #3 spun a bearing. when he took the block apart he said all main bearings look fine, along with rods #1 & 2. rod...
  18. Try your Search on Google

Back
Top