Search results

  1. Sko0terMan

    60 trim turbo

    still for sale......
  2. Sko0terMan

    1992 Ls-v turbo Hatch

    Need to sell, make offers
  3. Sko0terMan

    1992 Ls-v turbo Hatch

    I will also throw in a spare turbo(brand new)and another built b16 block. The block is sleeved and bored to 84mm. Needs to get machined again either cyl 1 or 4 has damage(valve broke at the stem) Has JG turbo rods
  4. Sko0terMan

    1992 Ls-v turbo Hatch

    Here are the dyno numbers before the 3" exhaust and only 12 lbs of boost.
  5. Sko0terMan

    1992 Ls-v turbo Hatch

    Hey guys im in a little bit of a bind and need to sell my hatch. Car has plenty of go fast goodies. The head is completely ported and polished, upgraded valvetrain(.5 oversized exhaust valve 1.0 oversized intake valve) JG turbo camshafts Custom JG intake manifold, 770cc RC injectors, Blox 80mm...
  6. Sko0terMan

    60 trim turbo

    need to sell any reasonable offers?
  7. Sko0terMan

    A/C oil volume

    I know it might be a big pain in the ass but take and drain the pag oil from each component and put back in the same amount in the new piece. Also some compressors come with oil already installed
  8. Sko0terMan

    60 trim turbo

    let me know
  9. Sko0terMan

    60 trim turbo

    I am selling a real master power turbo from Brazil not the cheap ebay knock off. Turbo is rated at 550hp. Turbo is brand new and has never been installed. compressor a/r is .50 turbine a/r is .63. It is a t3 flange with a 2.5" 4 bolt discharge outlet flange. looking to get $400 shipped. Open to...
  10. Sko0terMan

    ls/v help

    im running a stock crank and i am in the power goal that you are trying to hit. My block is at 9:5:1. Im boosting 18lbs. just some advice make sure you buy name brand parts otherwise your throwing money away. Make sure that you are going to be able to spend a good deal of money on this project...
  11. Sko0terMan

    Built B16 Head

    Im selling a built b16 head. Head has a full race port and polish from JG Engine Dynamics, titanium retainers, upgraded springs from JG Engine Dynamics,and black nitrade oversize valves. Head was built for a turbo setup. Head will also come with a replica type r intake manifold. I also have...
  12. Sko0terMan

    front sway bar

    eg sorry
  13. Sko0terMan

    front sway bar

    does anyone have pics on where the front sway bar mounts to the body?
  14. Sko0terMan

    hitting the rev limiter at 5500 rpm?

    Thanks for the help guys. Im just glad this problem car is gone
  15. Sko0terMan

    hitting the rev limiter at 5500 rpm?

    I decided to try a unchipped p30 ecu and it fixed the problem. No more rev limiter. The type r ecu that he has was coded pct
  16. Sko0terMan

    hitting the rev limiter at 5500 rpm?

    swapped the obd2 dizzy to a obd1 dizzy eliminated the jumper harness for the dizzy and still does the same thing. From what my buddy told me is this engine was running before they did the swap. Timing is not off either. set it to tdc and checked all the alignment marks. Still hits rev limiter at...
  17. Sko0terMan

    hitting the rev limiter at 5500 rpm?

    No the type r computer is stock. I have tried a chipped p28 and same thing only revs up to 5500 rpm
  18. Sko0terMan

    hitting the rev limiter at 5500 rpm?

    My friend brought me a 95 hatch with a b16b swap. The issue he is having is with the jdm b16b computer it hits the rev limiter at 5500 rpms. He is using a a jumper harness for his dizzy and his computer (obd2 to obd1). There are no stored codes in the ecu. I have checked the functionality of...
  19. Sko0terMan

    f/s h22a engine and trans

    99 h22a usdm engine and trans for sale. 70k on engine. No ecu or halfshaft. $1000 for engine and trans. Los angeles area. Any questions ask
  20. Sko0terMan

    F/S 98 civic dx stuff

    ecu pulled from 98 dx hatch P2E $50 shipped both fenders from 98 civic $50 pickup only coupe trunk lid $100 pickup only
  21. Try your Search on Google

Back
Top