Search results for query: *

It's ok, that's my fault. Because I didn't explain it clear, make people hard to understand.

Can anyone tell me that when the accord swap the H23 engine, is it need to add a wire for the IAB too?

Thanks for the suggestion, I find out the problem finally. It's just like what you said, the timing problem, but lucky it didn't bent the valve. The machanic said i am driving too hard, so the timing belt move. How about you, do you know how you cause that happen?

My 94 accord swapped a H23a engine in, after i swap it, the engine light is on, it's said the problem is come from the oxygen sensor, i try all the thing to fix it, i still on. So I do care of it at that moment, at least the car can run. But one times, when I am driving on the highway, the car...

I got a new o2 sensor replace already, and it still got the light on. I don't understand "u switch is on the heated circut not the side that reads the level of oxygen" . Can you explain to me clearly, thanks?

I put the H23 in my 94 accord lx too, and i got the idle is not normal too, it is quite high and sometimes will stay at 1500rpm, and although i switch the pin of the ECU, the engine light still go on and show there is problem of the O2 sensor. Did you have this kind of problem, if you got any...

I don't know why I exchanged the wire for the O2 sensor (A6 and A11), but there still show the error of the O2 sensor.

Is the intermediate shaft use to connect the transmission and the driver side axle? If that is the one, I don't think I can use it, because the intermediate shaft of my accord is a hole, it can put the axle head it, but the prelude one is a stick going out, it cannot connect to the accord axle...

So after I change the wire of the A11 to A6. Did I use back my Accord oxygen sensor or prelude oxygen sensor? And can I use back the accord axles?

Who can tell me which wire need to re-locate, and is the accord O2 sensor work on prelude. Because I don't know which wire need to change. Need help :(

Can anybody can tell me about which wire need to be change when H23 put in the Accord LX. Because when I check the code, it show the oxygen sensor have problem, then i check for the wire diagram, it shows that one of the wire from the oxygen sensor and the EGR need to switch. I don't know is...

My H23 engine put in the car already, and I use back my Accord wire harness to work on it, but I got a problem is the prelude has a knock sensor which the Accord don't. So do I need to connect the knock sensor to the ECU. I am using the prelude ECU in the car.

Oh thanks, and one more thing is when i use the harness from the accord, then i also can work with the prelude ECU, right? Just plug the prelude ECU then will work fine?

The wire harness is difference for the OBD1 and OBD2 engine? Because I know the engine is 94 H23, I think is OBD1. The problem is all the connector of the sensor for the prelude is all at the pressanger side, but my accord, i got three of each connector at driver side and pressanger side. I...

I got a 93 or 94 H23 Engine, but I got the problem the for the wiring, some of the connectors are not fit in the accord, and the position of the connector is difference too. Please give me some advice. I need some help, thanks.