Search results

  1. C

    engine harness question

    will any b16 obd1 harness work with any b16obd1 harness from a different model car? my guess is yes because b16 to b16, VTEC to VTEC, DOHC to DOHC. another question is do all different obd1 ecu's all have the same connectors from harness to ecu
  2. C

    rear disc brake conversion

    thanks
  3. C

    rear disc brake conversion

    i want to put rear disc brakes on my 89 civic hb, i know you can do it but i cant remember the swap details.
  4. C

    B16A2 want a new head

    i dropped a b16a2 into my 89 civ and a while back and im looking for a new head any recomendations?
  5. C

    b16a2 sirII into '89 civic DX HB

    do you mean the speedo out of an EK???
  6. C

    b16a2 sirII into '89 civic DX HB

    alright guys here's my problems gas guage and temp guage dont work, vtec doesnt kick in and what do I do about the speedo can I take off the speed sensor and but in an actual speedo cable?
  7. C

    JDM B16 Swap Problems!!

    my car is doing pretty much the same thing '89 civic HB DX w/ b16a2 sirII" it's sluggish to start but after i get past so many rpms the car jumps forward a couple times then takes off. i was thinking bad dizzy wire(s)
  8. C

    DX-obd1 wiring

    OBD0-OBD1 wiring i dropped a b16a2 into my '89 civic DX hatch, can anyone help me with the wiring i dont want to take it to someone to have them do it, but i also have no idea what im doing. so if anyone has any info or instructions please send it along. thanks
  9. C

    B16A2 into '89 civic DX HB, mount problems

    ok i got it i need both the t bracket and the drv side braket form a 90-93 integra
  10. C

    B16A2 into '89 civic DX HB, mount problems

    tranny mount (3 holes), rear mount (2 holes into cross-member), T-braket(3- engine, 1-mount), drv side mount (2 holes) would it help if i was to get a picture?
  11. C

    B16A2 into '89 civic DX HB, mount problems

    i have the T bracket that was sent with the engine it has the code "B18C". the mount on the engine is at an angel but not enough of one to put the mount square with the engine. do you think i might need to buy the driver side bracket from hasport for it to line up hasport also has a t-bracket do...
  12. C

    B16A2 into '89 civic DX HB, mount problems

    thats the problem, the rear mount is on the holes closer to the driver an its still to far over. i was also thinking that on the b16a the driver side bracket was at a sharper angle the reason for the mount bieng at the wrong angle on my b16a2 this is the only problem im having with this swap...
  13. C

    B16A2 into '89 civic DX HB, mount problems

    hey everyone i'm new to the forum. I have a problem with the mounts i bought from hasport "EFB2" (mounts with hydraulic). the mounts don't seem to fit right but on their website it does say b series into 88-91 civic and CRX. The rear mount or the bracket offsets the engine over to the left...
  14. Try your Search on Google

Back
Top